Messages

Jawohl Herr General - 88

Maurice (if I offended you), I'm sorry that I misspelled your name (NICK).
It wasn't intentional.


PS.
My typos were due to the fact that I used a translator.

[Patrick M. Hausen]

Patrick M. Hausen, I didn't think you were so sensitive about yourself.
Besides, the Germans are famous for this - Masters and subhumans - you probably know this from History?
Moreover, your year of birth does not impress me because I am 4 years older than you, Herr Baron von Hausen!

PS.
My typos were due to the fact that I used a translator.

Patricki OK, I understood, thanks for the tip!

Regards
Peter

Maurycy - thank you for your answer.
I need to check if my ISP allows incoming connections.

You can try capturing packets on the WAN interface to see if the packets are coming to port 81.

Maurycy, can you describe in more detail where I can check if packets are coming to port 81.

Patrick M. Hausen, I have a question for you.
I'm not very familiar with OPNSENSE, can you elaborate on your answer?

Gentlemen, I have a common question for you: does Firewall: NAT: Outbound play any role in my problem?

Maurice, I'll give you the details.  :)

I have access to the Internet via a wireless modem.
The public IP is 37.48.152.178
The IP on the WAN port is as specified above.

Firewall: NAT: Port Forward

Interface: HUAWEI
Proto: TCP
Source Address: *
Ports: *
Destination Address: HUAWEI address: 81
NAT IP: 192.168.100.22
Ports: 80(HTTP)

Hello Maurice :)

I have provided an example IP on the WAN port.
Does it matter what IP address I entered on the forum?

PS. Maurycy, I hope you weren't offended by my answer.  :)

Hello everyone.

It's possible that this topic has already been discussed, but I'm so confused that I can't find anything.
Namely, I have installed OPNsense, and on the interface (igc3) I have a server based on Apche2 connected, where I have a website in HTML.

The website runs on the local network, but how do I configure OPNsense so that I can view the website from the public network (I don't have a domain purchased at the moment). Currently, I would like to use the (permanent) public IP address assigned to me by the operator.

The (igc1) WAN interface has the address: 10.220.88.144
Interface (igc3) LAN I have the address: 192.168.100.22

I have configured: Firewall: NAT: Port Forward in such a way that from the internal WAN address: 10.220.88.144 - port (81) I can access the website at: 192.168.100.22

I enter 10.220.88.144:81 in the browser and a website opens on the Apache2 server.
What should I do to access this website from the Internet?

Please help.  :)