"
Anybody any thoughts on this ?
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
23.7 Legacy Series / Re: Order network cards ESXi mixed up
January 07, 2024, 08:39:11 PM
I tried this but have the same results as with the vmxnet cards.
I started adding the NIcs to the config. One by one while machine was running. All was working correctly until I shut down the machine. And boote dit up again. Then all broke.
Seems that all MAC addresses are intact, but I think it might be something with the PCI device numbering.
B
I started adding the NIcs to the config. One by one while machine was running. All was working correctly until I shut down the machine. And boote dit up again. Then all broke.
Seems that all MAC addresses are intact, but I think it might be something with the PCI device numbering.
B
#3
23.7 Legacy Series / Re: Order network cards ESXi mixed up
January 05, 2024, 09:30:33 PM
Thanks will try that and let you know
#4
23.7 Legacy Series / Order network cards ESXi mixed up
January 02, 2024, 12:06:24 AM
Hello,
I am having an issue with my setup.
Running the setup in Esxi
VMGuest 2 NICs - OPNsense running fine
Adding 1 NIC - Still ok
Adding another NIC everything stopped working.
After some investigation I found that the order of the NIC is changed. I found the article https://forum.opnsense.org/index.php?topic=27023.msg145910#msg145910 but can not get that to work
My goal is to setup OPNSense with mulplte vNIC but is seems to keep on reordering my NICs.
I am having an issue with my setup.
Running the setup in Esxi
VMGuest 2 NICs - OPNsense running fine
Adding 1 NIC - Still ok
Adding another NIC everything stopped working.
After some investigation I found that the order of the NIC is changed. I found the article https://forum.opnsense.org/index.php?topic=27023.msg145910#msg145910 but can not get that to work
My goal is to setup OPNSense with mulplte vNIC but is seems to keep on reordering my NICs.
Pages1
