Messages

I would expect to see the interface for VLAN3 look something like: "vlan01.3"

Also, are you configuring the VLAN on the AP? The doco says you can.

Can you share a screenshot of the INTERFACES: DEVICES: VLAN page, please.

You shouldn't need to bridge the interfaces. If the VLANs are all setup correctly, traffic should be routable so a few firewall policies should be all you need. Check the users Windows firewall is configured, too.

Have a read of the Steam FAQ regarding the requirements:
The network transfer happens on TCP port 27040 and it needs to be allowed by local firewall software. You also need to open UDP ports 27031-27036 for client discovery.


Are you able to add in a network diagram?

Code Select Expand

opnsense-patch https://github.com/opnsense/plugins/commit/00cb3e9dbeb3ebc35641738f09dee805fb48450c
A reboot may be required...

This fixed the issue. I did not need to reboot. I did re-enter the private key, however.

Here is a setup guide - https://docs.opnsense.org/manual/dhcp.html#kea-dhcp

Is there something specific you're looking to do?

I have had the same issues. Three panics in one hour. I have implemented the fix as suggested.

Update: 2.5 hours later, all is well in the world again.