Messages

I finally solved this, by one of this configurations or maybe both of them.
System->Settings->General->Gateway switching->Enabled
System->Settings->General->Configured Fixed DNSs, google and cloudflare. If not, some DNS from the other provider would get stuck in resolv file and it would not work correctly.

PS: Interface should be set as "None" when configuring ddclient.

I created a rule for the specific check domains. When I have WAN1 connected, both checks (for my 2 personal domains) are going through that rule and I can see them in the logs.
When WAN1 is disconnected (NOT disabled) and gets marked as down, checks are not going through that rule...
Seems to be trying to use some other hidden rule maybe?

I have been trying to get a domain ddns working in a dual wan enviroment using failover.
I followed option B of this message:
https://forum.opnsense.org/index.php?topic=34139.msg165202#msg165202

But it doesn't work for me, I want to update the same domain on both interfaces.
But when WAN1 goes down, I always get the error "no global IP address detected, check config if warning persists". It would seem that it doesn't recognize interface WAN2 as being the active one now.

What can I check/test/config?

PS: Forgot to say, WAN2 is pppoe. Can it be the problem since the IP is not in the interface but in the conection?
(stupid comment since it is not reading interface IP but curling it out)

PS2: If I DISABLE WAN1 gateway, the curl command works and ddclient works too.
If I DISCONNECT the cable on WAN1 for testing purposes, the GW1 goes down but the curl command does not work (neither does ddclient obviously)
Ideas? missing firewall rule?

I have no idea what I am doing, I created 2 pull requests, 1 per file.
I think I cannot do it all in one when creating the request from github...

It got broken with 24.7.3 update, had to delete the import.

[It seems to be some conflict between the command line usage and the UI side.]

Maybe the USB is somewhat flaky, how old is the UPS gear?

Ufff, must be at least 15 years old...
Maybe it was the USB cable and it just needed some time to adapt to it :P

EDIT: It seems to be some conflict between the command line usage and the UI side.
It was working correctly on web, I run the bcmxcp_usb (twice) from the command line and now again it is not working on the web and I cannot start the service...

EDIT2: After a few minutes it let me start the service again and is now working.

Plugin seems to be working correctly, can someone post this on github and make a pull request?
Thanks!

Today, it just started working...
The tools service that I was not able to start now started correctly at the first click on "start", weird.
The diagnostics page started spitting out UPS info too so I am guessing that the UI side of the plugin is dependant of that service.
I don't remember changing any config yesterday...

@doktornotor
This is the response

Code Select Expand

root@OPNsense:/etc # su -fm nut -c "/usr/local/libexec/nut/bcmxcp_usb -a PW9120 -DDDDD"
   0.000000     [D5] send_to_all: SETINFO driver.state "init.starting"
Network UPS Tools - BCMXCP UPS driver 0.34 (2.8.2)
USB communication subdriver 0.27
   0.000084     [D5] do_upsconf_args: confupsname=PW9120, var=driver, val=bcmxcp_usb
   0.000087     [D5] do_upsconf_args: call main_arg()
   0.000089     [D3] main_arg: var='driver' val='bcmxcp_usb'
   0.000091     [D5] do_upsconf_args: not a main_arg()
   0.000092     [D5] do_upsconf_args: this is a 'driver' setting, may we proceed?
   0.000096     [D5] do_upsconf_args: 'driver' setting already applied with this value
   0.000098     [D5] do_upsconf_args: confupsname=PW9120, var=port, val=auto
   0.000099     [D5] do_upsconf_args: call main_arg()
   0.000100     [D3] main_arg: var='port' val='auto'
   0.000103     [D5] send_to_all: SETINFO driver.parameter.port "auto"
   0.000108     [D1] Network UPS Tools version 2.8.2 (release/snapshot of 2.8.2) built with FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9); Target: x86_64-unknown-freebsd14.1; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --without-nut_monitor --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --with-freeipmi --without-ipmi --with-doc=man=auto --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/share/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.1
   0.000115     [D1] debug level is '5'
   0.000118     [D5] send_to_all: SETINFO driver.debug "5"
   0.000121     [D5] send_to_all: SETFLAGS driver.debug RW NUMBER
   0.000197     [D1] No need to become_user(nut): already UID=316 GID=316
   0.000211     [D5] send_to_all: SETINFO device.type "ups"
   0.000213     [D5] send_to_all: SETINFO driver.state "init.device"
   0.000215     [D1] entering nutusb_open()
   0.000308     [D1] device 000 opened successfully
   0.003485     [D5] send_to_all: SETINFO driver.state "init.quiet"
   0.003523     [D5] send_to_all: SETINFO driver.version "2.8.2"
   0.003525     [D5] send_to_all: SETINFO driver.version.internal "0.34"
   0.003527     [D5] send_to_all: SETINFO driver.name "bcmxcp_usb"
   0.003529     [D5] send_to_all: SETINFO driver.state "init.info"
   0.003537     [D3] send_read_command: (4 bytes) => ab 01 31 23
   0.003985     [D1] entering get_answer(31)
   0.333168     [D1] get_answer: (128 bytes) => ab 01 79 01 02 04 02 04 02 00 3c 00 01 00 06 50
   0.333196     [D1]  57 39 31 32 30 52 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   0.333213     [D1]  00 00 f0 00 f0 00 00 00 41 41 00 00 00 00 51 f0 e2 00 00 00 00 00 00 00 00
   0.333228     [D1]  00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 00 00 f0 00 00 41 00 00 41
   0.333243     [D1]  00 00 f0 00 00 00 00 00 00 f0 00 00 00 1b c0 17 00 82 04 00 00 0f 10 02 00
   0.333253     [D1]  00 00 00 00 00 00 00 80 00 e4 ab 01
   0.333263     [D1] get_answer: block_number = 1
   0.333269     [D3] get_answer: data length = 121
   0.333275     [D2] get_answer: sequence number (1) is ok
   0.333281     [D2] get_answer: checksum is ok
   0.333286     [D2] get_answer: next sequence is 2
   0.333296     [D1] get_answer: block_number = 1
   0.333301     [D3] get_answer: data length = 121
   0.333306     [D2] get_answer: need to read -2 more data
   0.333311     [D1] get_answer: block_number = 1
   0.333316     [D3] get_answer: data length = 121
   0.333321     [D2] get_answer: need to read 119 more data
   0.477108     [D1] get_answer: (28 bytes) => ab 01 17 82 00 43 00 80 84 08 00 50 00 00 00 00
   0.477127     [D1]  00 00 03 00 10 1a 00 0e 00 16 00 cb
   4.904022     [D5] get_answer: (121 bytes) => 02 04 02 04 02 00 3c 00 01 00 06 50 57 39 31 32
   4.904058     [D5]  30 52 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00
   4.904075     [D5]  f0 00 00 00 41 41 00 00 00 00 51 f0 e2 00 00 00 00 00 00 00 00 00 00 00 00
   4.904090     [D5]  00 00 00 00 00 00 00 00 f0 00 00 00 00 00 f0 00 00 41 00 00 41 00 00 f0 00
   4.904105     [D5]  00 00 00 00 00 f0 00 00 00 1b c0 17 00 82 04 00 00 0f 10 02 00 00 00 00 00
   4.904113     [D5]  00 00 00 80 00
   4.904131     [D5] send_to_all: SETINFO ups.firmware "Cont:02.04 Inve:02.04"
   4.904141     [D5] send_to_all: SETINFO ups.power.nominal "3000"
   4.904150     [D5] send_to_all: SETINFO output.phases "1"
   4.904159     [D5] send_to_all: SETINFO ups.mfr "Eaton"
   4.904182     [D5] send_to_all: SETINFO ups.model "PW9120 3000i"
   4.904189     [D2] Length of meter map: 82

   4.904194     [D2] Index      Offset  Format  NUT
   4.904202     [D2] 0021       0000    f0      ups.realpower
   4.904210     [D2] 0023       0004    f0      ups.power
   4.904215     [D2] 0027       0008    41      output.frequency
   4.904222     [D2] 0028       0012    41      input.frequency
   4.904228     [D2] 0033       0016    51      battery.voltage
   4.904234     [D2] 0034       0020    f0      battery.charge
   4.904240     [D2] 0035       0024    e2      battery.runtime
   4.904245     [D2] 0056       0028    f0      input.voltage
   4.904250     [D2] 0062       0032    f0      ambient.temperature
   4.904256     [D2] 0065       0036    41      output.current
   4.904265     [D2] 0068       0040    41      output.current.nominal
   4.904270     [D2] 0071       0044    f0      ups.power.nominal
   4.904276     [D2] 0078       0048    f0      output.voltage
   4.904280     [D2]

   4.904286     [D2] Length of alarm map: 27

   4.904291     [D2] Index      Alarm   Supported
   4.904297     [D3] -001       INVERTER_AC_OVER_VOLTAGE        No
   4.904303     [D3] -001       INVERTER_AC_UNDER_VOLTAGE       No
   4.904309     [D3] -001       INVERTER_OVER_OR_UNDER_FREQ     No
   4.904319     [D3] -001       BYPASS_AC_OVER_VOLTAGE  No
   4.904327     [D3] -001       BYPASS_AC_UNDER_VOLTAGE No
   4.904335     [D3] -001       BYPASS_OVER_OR_UNDER_FREQ       No
   4.904343     [D2] 0000       INPUT_AC_OVER_VOLTAGE   Yes
   4.904348     [D2] 0001       INPUT_AC_UNDER_VOLTAGE  Yes
   4.904354     [D2] 0002       INPUT_UNDER_OR_OVER_FREQ        Yes
   4.904359     [D2] 0003       OUTPUT_OVER_VOLTAGE     Yes
   4.904364     [D2] 0004       OUTPUT_UNDER_VOLTAGE    Yes
   4.904371     [D3] -001       OUTPUT_UNDER_OR_OVER_FREQ       No
   4.904376     [D2] 0005       REMOTE_EMERGENCY_PWR_OFF        Yes
   4.904381     [D3] -001       REMOTE_GO_TO_BYPASS     No
   4.904386     [D3] -001       BUILDING_ALARM_6        No
   4.904391     [D3] -001       BUILDING_ALARM_5        No
   4.904400     [D3] -001       BUILDING_ALARM_4        No
   4.904407     [D3] -001       BUILDING_ALARM_3        No
   4.904415     [D3] -001       BUILDING_ALARM_2        No
   4.904423     [D3] -001       BUILDING_ALARM_1        No
   4.904430     [D3] -001       STATIC_SWITCH_OVER_TEMP No
   4.904438     [D3] -001       CHARGER_OVER_TEMP       No
   4.904446     [D3] -001       CHARGER_LOGIC_PWR_FAIL  No
   4.904454     [D3] -001       CHARGER_OVER_VOLTAGE_OR_CURRENT No
   4.904463     [D3] -001       INVERTER_OVER_TEMP      No
   4.904470     [D2] 0006       OUTPUT_OVERLOAD Yes
   4.904476     [D3] -001       RECTIFIER_INPUT_OVER_CURRENT    No
   4.904485     [D3] -001       INVERTER_OUTPUT_OVER_CURRENT    No
   4.904493     [D3] -001       DC_LINK_OVER_VOLTAGE    No
   4.904498     [D3] -001       DC_LINK_UNDER_VOLTAGE   No
   4.904504     [D3] -001       RECTIFIER_FAILED        No
   4.904509     [D2] 0007       INVERTER_FAULT  Yes
   4.904514     [D3] -001       BATTERY_CONNECTOR_FAIL  No
   4.904519     [D3] -001       BYPASS_BREAKER_FAIL     No
   4.904524     [D2] 0008       CHARGER_FAIL    Yes
   4.904533     [D3] -001       RAMP_UP_FAILED  No
   4.904540     [D3] -001       STATIC_SWITCH_FAILED    No
   4.904549     [D3] -001       ANALOG_AD_REF_FAIL      No
   4.904556     [D3] -001       BYPASS_UNCALIBRATED     No
   4.904564     [D3] -001       RECTIFIER_UNCALIBRATED  No
   4.904572     [D3] -001       OUTPUT_UNCALIBRATED     No
   4.904580     [D3] -001       INVERTER_UNCALIBRATED   No
   4.904589     [D3] -001       DC_VOLT_UNCALIBRATED    No
   4.904596     [D3] -001       OUTPUT_CURRENT_UNCALIBRATED     No
   4.904601     [D3] -001       RECTIFIER_CURRENT_UNCALIBRATED  No
   4.904606     [D3] -001       BATTERY_CURRENT_UNCALIBRATED    No
   4.904611     [D3] -001       INVERTER_ON_OFF_STAT_FAIL       No
   4.904617     [D3] -001       BATTERY_CURRENT_LIMIT   No
   4.904622     [D3] -001       INVERTER_STARTUP_FAIL   No
   4.904627     [D3] -001       ANALOG_BOARD_AD_STAT_FAIL       No
   4.904632     [D3] -001       OUTPUT_CURRENT_OVER_100 No
   4.904637     [D3] -001       BATTERY_GROUND_FAULT    No
   4.904642     [D3] -001       WAITING_FOR_CHARGER_SYNC        No
   4.904647     [D3] -001       NV_RAM_FAIL     No
   4.904652     [D3] -001       ANALOG_BOARD_AD_TIMEOUT No
   4.904661     [D3] -001       SHUTDOWN_IMMINENT       No
   4.904669     [D2] 0009       BATTERY_LOW     Yes
   4.904679     [D2] 0010       UTILITY_FAIL    Yes
   4.904686     [D2] 0011       OUTPUT_SHORT_CIRCUIT    Yes
   4.904693     [D2] 0012       UTILITY_NOT_PRESENT     Yes
   4.904702     [D3] -001       FULL_TIME_CHARGING      No
   4.904709     [D3] -001       FAST_BYPASS_COMMAND     No
   4.904717     [D3] -001       AD_ERROR        No
   4.904726     [D3] -001       INTERNAL_COM_FAIL       No
   4.904733     [D3] -001       RECTIFIER_SELFTEST_FAIL No
   4.904738     [D3] -001       RECTIFIER_EEPROM_FAIL   No
   4.904743     [D3] -001       RECTIFIER_EPROM_FAIL    No
   4.904748     [D3] -001       INPUT_LINE_VOLTAGE_LOSS No
   4.904753     [D2] 0013       BATTERY_DC_OVER_VOLTAGE Yes
   4.904758     [D3] -001       POWER_SUPPLY_OVER_TEMP  No
   4.904764     [D3] -001       POWER_SUPPLY_FAIL       No
   4.904768     [D3] -001       POWER_SUPPLY_5V_FAIL    No
   4.904773     [D3] -001       POWER_SUPPLY_12V_FAIL   No
   4.904779     [D2] 0014       HEATSINK_OVER_TEMP      Yes
   4.904784     [D3] -001       HEATSINK_TEMP_SENSOR_FAIL       No
   4.904789     [D3] -001       RECTIFIER_CURRENT_OVER_125      No
   4.904798     [D3] -001       RECTIFIER_FAULT_INTERRUPT_FAIL  No
   4.904807     [D3] -001       RECTIFIER_POWER_CAPACITOR_FAIL  No
   4.904812     [D3] -001       INVERTER_PROGRAM_STACK_ERROR    No
   4.904817     [D3] -001       INVERTER_BOARD_SELFTEST_FAIL    No
   4.904822     [D3] -001       INVERTER_AD_SELFTEST_FAIL       No
   4.904827     [D3] -001       INVERTER_RAM_SELFTEST_FAIL      No
   4.904836     [D3] -001       NV_MEMORY_CHECKSUM_FAIL No
   4.904844     [D3] -001       PROGRAM_CHECKSUM_FAIL   No
   4.904853     [D3] -001       INVERTER_CPU_SELFTEST_FAIL      No
   4.904861     [D3] -001       NETWORK_NOT_RESPONDING  No
   4.904867     [D3] -001       FRONT_PANEL_SELFTEST_FAIL       No
   4.904876     [D3] -001       NODE_EEPROM_VERIFICATION_ERROR  No
   4.904883     [D3] -001       OUTPUT_AC_OVER_VOLT_TEST_FAIL   No
   4.904891     [D3] -001       OUTPUT_DC_OVER_VOLTAGE  No
   4.904896     [D3] -001       INPUT_PHASE_ROTATION_ERROR      No
   4.904901     [D3] -001       INVERTER_RAMP_UP_TEST_FAILED    No
   4.904906     [D3] -001       INVERTER_OFF_COMMAND    No
   4.904911     [D3] -001       INVERTER_ON_COMMAND     No
   4.904916     [D3] -001       TO_BYPASS_COMMAND       No
   4.904921     [D3] -001       FROM_BYPASS_COMMAND     No
   4.904929     [D3] -001       AUTO_MODE_COMMAND       No
   4.904937     [D3] -001       EMERGENCY_SHUTDOWN_COMMAND      No
   4.904944     [D3] -001       SETUP_SWITCH_OPEN       No
   4.904949     [D3] -001       INVERTER_OVER_VOLT_INT  No
   4.904954     [D3] -001       INVERTER_UNDER_VOLT_INT No
   4.904959     [D3] -001       ABSOLUTE_DCOV_ACOV      No
   4.904964     [D3] -001       PHASE_A_CURRENT_LIMIT   No
   4.904970     [D3] -001       PHASE_B_CURRENT_LIMIT   No
   4.904980     [D3] -001       PHASE_C_CURRENT_LIMIT   No
   4.904988     [D3] -001       BYPASS_NOT_AVAILABLE    No
   4.904997     [D3] -001       RECTIFIER_BREAKER_OPEN  No
   4.905004     [D3] -001       BATTERY_CONTACTOR_OPEN  No
   4.905009     [D3] -001       INVERTER_CONTACTOR_OPEN No
   4.905014     [D3] -001       BYPASS_BREAKER_OPEN     No
   4.905019     [D3] -001       INV_BOARD_ACOV_INT_TEST_FAIL    No
   4.905025     [D3] -001       INVERTER_OVER_TEMP_TRIP No
   4.905030     [D3] -001       INV_BOARD_ACUV_INT_TEST_FAIL    No
   4.905038     [D3] -001       INVERTER_VOLTAGE_FEEDBACK_ERROR No
   4.905045     [D3] -001       DC_UNDER_VOLTAGE_TIMEOUT        No
   4.905052     [D3] -001       AC_UNDER_VOLTAGE_TIMEOUT        No
   4.905057     [D3] -001       DC_UNDER_VOLTAGE_WHILE_CHARGE   No
   4.905062     [D3] -001       INVERTER_VOLTAGE_BIAS_ERROR     No
   4.905071     [D3] -001       RECTIFIER_PHASE_ROTATION        No
   4.905079     [D3] -001       BYPASS_PHASER_ROTATION  No
   4.905089     [D3] -001       SYSTEM_INTERFACE_BOARD_FAIL     No
   4.905097     [D3] -001       PARALLEL_BOARD_FAIL     No
   4.905106     [D3] -001       LOST_LOAD_SHARING_PHASE_A       No
   4.905114     [D3] -001       LOST_LOAD_SHARING_PHASE_B       No
   4.905121     [D3] -001       LOST_LOAD_SHARING_PHASE_C       No
   4.905126     [D3] -001       DC_OVER_VOLTAGE_TIMEOUT No
   4.905131     [D3] -001       BATTERY_TOTALLY_DISCHARGED      No
   4.905136     [D3] -001       INVERTER_PHASE_BIAS_ERROR       No
   4.905140     [D3] -001       INVERTER_VOLTAGE_BIAS_ERROR_2   No
   4.905146     [D3] -001       DC_LINK_BLEED_COMPLETE  No
   4.905151     [D3] -001       LARGE_CHARGER_INPUT_CURRENT     No
   4.905156     [D3] -001       INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL No
   4.905161     [D3] -001       LOSS_OF_REDUNDANCY      No
   4.905166     [D3] -001       LOSS_OF_SYNC_BUS        No
   4.905171     [D3] -001       RECTIFIER_BREAKER_SHUNT_TRIP    No
   4.905177     [D3] -001       LOSS_OF_CHARGER_SYNC    No
   4.905185     [D3] -001       INVERTER_LOW_LEVEL_TEST_TIMEOUT No
   4.905194     [D3] -001       OUTPUT_BREAKER_OPEN     No
   4.905202     [D3] -001       CONTROL_POWER_ON        No
   4.905214     [D3] -001       INVERTER_ON     No
   4.905221     [D3] -001       CHARGER_ON      No
   4.905226     [D3] -001       BYPASS_ON       No
   4.905231     [D3] -001       BYPASS_POWER_LOSS       No
   4.905237     [D3] -001       ON_MANUAL_BYPASS        No
   4.905242     [D3] -001       BYPASS_MANUAL_TURN_OFF  No
   4.905247     [D3] -001       INVERTER_BLEEDING_DC_LINK_VOLT  No
   4.905252     [D3] -001       CPU_ISR_ERROR   No
   4.905257     [D3] -001       SYSTEM_ISR_RESTART      No
   4.905273     [D3] -001       PARALLEL_DC     No
   4.905282     [D3] -001       BATTERY_NEEDS_SERVICE   No
   4.905289     [D3] -001       BATTERY_CHARGING        No
   4.905294     [D2] 0015       BATTERY_NOT_CHARGED     Yes
   4.905299     [D3] -001       DISABLED_BATTERY_TIME   No
   4.905304     [D3] -001       SERIES_7000_ENABLE      No
   4.905309     [D3] -001       OTHER_UPS_ON    No
   4.905314     [D3] -001       PARALLEL_INVERTER       No
   4.905319     [D3] -001       UPS_IN_PARALLEL No
   4.905324     [D3] -001       OUTPUT_BREAKER_REALY_FAIL       No
   4.905329     [D3] -001       CONTROL_POWER_OFF       No
   4.905334     [D3] -001       LEVEL_2_OVERLOAD_PHASE_A        No
   4.905339     [D3] -001       LEVEL_2_OVERLOAD_PHASE_B        No
   4.905344     [D2] 0016       LEVEL_2_OVERLOAD_PHASE_C        Yes
   4.905353     [D3] -001       LEVEL_3_OVERLOAD_PHASE_A        No
   4.905360     [D2] 0017       LEVEL_3_OVERLOAD_PHASE_B        Yes
   4.905371     [D3] -001       LEVEL_3_OVERLOAD_PHASE_C        No
   4.905377     [D2] 0018       LEVEL_4_OVERLOAD_PHASE_A        Yes
   4.905382     [D3] -001       LEVEL_4_OVERLOAD_PHASE_B        No
   4.905387     [D2] 0019       LEVEL_4_OVERLOAD_PHASE_C        Yes
   4.905393     [D2] 0020       UPS_ON_BATTERY  Yes
   4.905399     [D3] -001       UPS_ON_BYPASS   No
   4.905404     [D3] -001       LOAD_DUMPED     No
   4.905412     [D3] -001       LOAD_ON_INVERTER        No
   4.905420     [D3] -001       UPS_ON_COMMAND  No
   4.905428     [D2] 0021       UPS_OFF_COMMAND Yes
   4.905436     [D3] -001       LOW_BATTERY_SHUTDOWN    No
   4.905444     [D3] -001       AUTO_ON_ENABLED No
   4.905452     [D3] -001       SOFTWARE_INCOMPABILITY_DETECTED No
   4.905457     [D3] -001       INVERTER_TEMP_SENSOR_FAILED     No
   4.905462     [D3] -001       DC_START_OCCURED        No
   4.905467     [D3] -001       IN_PARALLEL_OPERATION   No
   4.905472     [D3] -001       SYNCING_TO_BYPASS       No
   4.905477     [D3] -001       RAMPING_UPS_UP  No
   4.905482     [D3] -001       INVERTER_ON_DELAY       No
   4.905487     [D3] -001       CHARGER_ON_DELAY        No
   4.905492     [D3] -001       WAITING_FOR_UTIL_INPUT  No
   4.905497     [D3] -001       CLOSE_BYPASS_BREAKER    No
   4.905502     [D3] -001       TEMPORARY_BYPASS_OPERATION      No
   4.905507     [D3] -001       SYNCING_TO_OUTPUT       No
   4.905515     [D3] -001       BYPASS_FAILURE  No
   4.905523     [D3] -001       AUTO_OFF_COMMAND_EXECUTED       No
   4.905535     [D3] -001       AUTO_ON_COMMAND_EXECUTED        No
   4.905543     [D3] -001       BATTERY_TEST_FAILED     No
   4.905548     [D3] -001       FUSE_FAIL       No
   4.905552     [D3] -001       FAN_FAIL        No
   4.905557     [D3] -001       SITE_WIRING_FAULT       No
   4.905562     [D3] -001       BACKFEED_CONTACTOR_FAIL No
   4.905568     [D3] -001       ON_BUCK No
   4.905573     [D3] -001       ON_BOOST        No
   4.905578     [D3] -001       ON_DOUBLE_BOOST No
   4.905583     [D3] -001       BATTERIES_DISCONNECTED  No
   4.905588     [D3] -001       UPS_CABINET_OVER_TEMP   No
   4.905593     [D3] -001       TRANSFORMER_OVER_TEMP   No
   4.905598     [D3] -001       AMBIENT_UNDER_TEMP      No
   4.905603     [D3] -001       AMBIENT_OVER_TEMP       No
   4.905608     [D3] -001       CABINET_DOOR_OPEN       No
   4.905613     [D3] -001       CABINET_DOOR_OPEN_VOLT_PRESENT  No
   4.905618     [D3] -001       AUTO_SHUTDOWN_PENDING   No
   4.905623     [D3] -001       TAP_SWITCHING_REALY_PENDING     No
   4.905628     [D3] -001       UNABLE_TO_CHARGE_BATTERIES      No
   4.905633     [D3] -001       STARTUP_FAILURE_CHECK_EPO       No
   4.905638     [D3] -001       AUTOMATIC_STARTUP_PENDING       No
   4.905646     [D3] -001       MODEM_FAILED    No
   4.905651     [D3] -001       INCOMING_MODEM_CALL_STARTED     No
   4.905656     [D3] -001       OUTGOING_MODEM_CALL_STARTED     No
   4.905661     [D3] -001       MODEM_CONNECTION_ESTABLISHED    No
   4.905666     [D3] -001       MODEM_CALL_COMPLETED_SUCCESS    No
   4.905671     [D2]

   4.905676     [D2] Length of Config_block: 8318

   4.905682     [D2] Length of statistics map: 252

   4.905688     [D2] Length of alarm history log: 49158

   4.905696     [D2] Length of topology block: 8309

   4.905702     [D2] Length of max supported command length: 0

   4.905707     [D2] Length of command list: 0

   4.905712     [D2] Length of outlet_block: 0

   4.905717     [D2] Length of alarm_block: 0

   4.905726     [D3] send_read_command: (4 bytes) => ab 01 36 1e
   4.906211     [D1] entering get_answer(36)
   5.197273     [D1] get_answer: (85 bytes) => ab 06 50 81 4a 01 30 75 00 21 fa 00 dc 00 32 00
   5.197306     [D1]  00 00 00 bb ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04
   5.197322     [D1]  02 04 02 00 00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20
   5.197335     [D1]  20 20 52 51 50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20 7d
   5.197342     [D1] get_answer: block_number = 6
   5.197348     [D3] get_answer: data length = 80
   5.197355     [D2] get_answer: sequence number (1) is ok
   5.197361     [D2] get_answer: checksum is ok
   5.197367     [D2] get_answer: all data received
   5.197381     [D5] get_answer: (80 bytes) => 4a 01 30 75 00 21 fa 00 dc 00 32 00 00 00 00 bb
   5.197396     [D5]  ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04 02 04 02 00
   5.197410     [D5]  00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20 20 20 52 51
   5.197421     [D5]  50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20
   5.197435     [D5] send_to_all: SETINFO output.voltage.nominal "220"
   5.197444     [D5] send_to_all: SETINFO output.frequency.nominal "50"
   5.197454     [D5] send_to_all: SETINFO ups.serial "RQPONMLKJI      "
   5.197462     [D5] send_to_all: SETINFO device.part "05147365-5502   "
   5.197470     [D3] send_read_command: (4 bytes) => ab 01 3c 18
   5.197957     [D1] entering get_answer(3c)
   5.357254     [D1] get_answer: (36 bytes) => ab 0c 1f 81 dc 00 32 00 2a 00 20 43 fa 00 bb 00
   5.357281     [D1]  f2 00 00 00 02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00 85
   5.357287     [D1] get_answer: block_number = c
   5.357293     [D3] get_answer: data length = 31
   5.357299     [D2] get_answer: sequence number (1) is ok
   5.357305     [D2] get_answer: checksum is ok
   5.357310     [D2] get_answer: all data received
   5.357323     [D5] get_answer: (31 bytes) => dc 00 32 00 2a 00 20 43 fa 00 bb 00 f2 00 00 00
   5.357334     [D5]  02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00
   5.357347     [D5] send_to_all: SETINFO input.voltage.nominal "220"
   5.357356     [D5] send_to_all: SETINFO input.frequency.nominal "50"
   5.357364     [D5] send_to_all: SETINFO input.frequency.low "48"
   5.357372     [D5] send_to_all: SETINFO input.frequency.high "52"
   5.357380     [D5] send_to_all: SETINFO input.transfer.boost.high "187"
   5.357387     [D5] send_to_all: SETINFO input.transfer.trim.low "242"
   5.357397     [D5] send_to_all: SETINFO ups.beeper.status "enabled"
   5.357405     [D5] send_to_all: SETINFO input.transfer.low "160"
   5.357414     [D5] send_to_all: SETINFO input.transfer.high "276"
   5.357421     [D5] send_to_all: SETINFO ambient.temperature.high "40"
   5.357429     [D5] send_to_all: SETINFO battery.runtime.low "2"
   5.357436     [D5] send_to_all: ADDCMD shutdown.return
   5.357442     [D5] send_to_all: ADDCMD shutdown.stayoff
   5.357448     [D5] send_to_all: ADDCMD test.battery.start
   5.357457     [D3] send_read_command: (4 bytes) => ab 01 43 11
   5.357941     [D1] entering get_answer(43)
   5.485219     [D1] get_answer: (9 bytes) => ab 13 03 81 40 00 00 7e 00
   5.485229     [D1] get_answer: block_number = 13
   5.485234     [D3] get_answer: data length = 3
   5.485239     [D2] get_answer: sequence number (1) is ok
   5.485244     [D2] get_answer: checksum is ok
   5.485249     [D2] get_answer: all data received
   5.485257     [D5] get_answer: (3 bytes) => 40 00 00
   5.485267     [D5] nut_find_infoval: found On-Line UPS, Single Phase (value: 64)
   5.485278     [D5] send_to_all: SETINFO ups.description "On-Line UPS, Single Phase"
   5.485288     [D3] send_write_command: (7 bytes) => ab 04 cf 69 e8 d5 5c
   7.487273     [D3] send_write_command: (7 bytes) => ab 04 95 ff 00 00 bd
   9.548923     [D1] entering get_answer(95)
   9.661376     [D1] get_answer: (12 bytes) => ab 09 07 81 31 95 ff 01 06 0b 0c e1
   9.661392     [D1] get_answer: block_number = 9
   9.661399     [D3] get_answer: data length = 7
   9.661406     [D2] get_answer: sequence number (1) is ok
   9.661412     [D2] get_answer: checksum is ok
   9.661418     [D2] get_answer: all data received
   9.661428     [D5] get_answer: (7 bytes) => 31 95 ff 01 06 0b 0c
   9.661440     [D5] send_to_all: ADDCMD beeper.disable
   9.661447     [D5] send_to_all: ADDCMD beeper.enable
   9.661454     [D5] send_to_all: ADDCMD beeper.mute
   9.661466     [D5] send_to_all: SETINFO output.voltage.nominal "0"
   9.661476     [D5] send_to_all: SETFLAGS output.voltage.nominal RW STRING
   9.661483     [D5] send_to_all: SETAUX output.voltage.nominal 3
   9.661496     [D5] send_to_all: SETINFO driver.state "init.updateinfo"
   9.661510     [D3] send_read_command: (4 bytes) => ab 01 34 20
   9.662039     [D1] entering get_answer(34)
   9.885361     [D1] get_answer: (57 bytes) => ab 04 34 81 2d 01 00 00 e7 01 00 00 e2 15 48 42
   9.885389     [D1]  96 0e 48 42 cd cc d0 42 64 00 00 00 f2 12 00 00 e6 00 00 00 1b 00 00 00 b8
   9.885403     [D1]  1e 0d 40 8c 2e 5a 41 b8 0b 00 00 dc 00 00 00 ac
   9.885410     [D1] get_answer: block_number = 4
   9.885416     [D3] get_answer: data length = 52
   9.885421     [D2] get_answer: sequence number (1) is ok
   9.885427     [D2] get_answer: checksum is ok
   9.885432     [D2] get_answer: all data received
   9.885445     [D5] get_answer: (52 bytes) => 2d 01 00 00 e7 01 00 00 e2 15 48 42 96 0e 48 42
   9.885461     [D5]  cd cc d0 42 64 00 00 00 f2 12 00 00 e6 00 00 00 1b 00 00 00 b8 1e 0d 40 8c
   9.885470     [D5]  2e 5a 41 b8 0b 00 00 dc 00 00 00
   9.885486     [D5] send_to_all: SETINFO ups.realpower "301"
   9.885496     [D5] send_to_all: SETINFO ups.power "487"
   9.885519     [D5] send_to_all: SETINFO output.frequency "50.0"
   9.885531     [D5] send_to_all: SETINFO input.frequency "50.0"
   9.885541     [D5] send_to_all: SETINFO battery.voltage "104.4"
   9.885551     [D5] send_to_all: SETINFO battery.charge "100"
   9.885564     [D5] send_to_all: SETINFO battery.runtime "4850"
   9.885573     [D5] send_to_all: SETINFO input.voltage "230"
   9.885597     [D5] send_to_all: SETINFO ambient.temperature "27"
   9.885607     [D5] send_to_all: SETINFO output.current " 2.2"
   9.885618     [D5] send_to_all: SETINFO output.current.nominal "13.6"
   9.885628     [D5] send_to_all: SETINFO output.voltage "220"
   9.885651     [D5] send_to_all: SETINFO ups.load " 16.2"
   9.885661     [D3] send_read_command: (4 bytes) => ab 01 35 1f
   9.886145     [D1] entering get_answer(35)
  10.045381     [D1] get_answer: (28 bytes) => ab 05 17 81 00 00 00 00 00 00 00 00 00 00 00 00
  10.045399     [D1]  00 00 00 00 00 00 00 00 00 00 00 b8
  10.045406     [D1] get_answer: block_number = 5
  10.045411     [D3] get_answer: data length = 23
  10.045416     [D2] get_answer: sequence number (1) is ok
  10.045422     [D2] get_answer: checksum is ok
  10.045427     [D2] get_answer: all data received
  10.045439     [D5] get_answer: (23 bytes) => 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  10.045447     [D5]  00 00 00 00 00 00 00
  10.045461     [D3] send_read_command: (4 bytes) => ab 01 33 21
  10.045941     [D1] entering get_answer(33)
  10.173346     [D1] get_answer: (9 bytes) => ab 03 04 81 50 d3 00 84 26
  10.173356     [D1] get_answer: block_number = 3
  10.173361     [D3] get_answer: data length = 4
  10.173367     [D2] get_answer: sequence number (1) is ok
  10.173372     [D2] get_answer: checksum is ok
  10.173377     [D2] get_answer: all data received
  10.173384     [D5] get_answer: (4 bytes) => 50 d3 00 84
  10.173398     [D5] send_to_all: SETINFO ups.status "OL"
  10.173405     [D3] send_read_command: (4 bytes) => ab 01 3b 19
  10.173886     [D1] entering get_answer(3b)
  10.333365     [D1] get_answer: (26 bytes) => ab 0b 15 81 02 00 00 c0 42 00 00 ba 42 0a 00 00
  10.333380     [D1]  00 00 00 00 00 00 00 01 04 a5
  10.333386     [D1] get_answer: block_number = b
  10.333391     [D3] get_answer: data length = 21
  10.333397     [D2] get_answer: sequence number (1) is ok
  10.333402     [D2] get_answer: checksum is ok
  10.333407     [D2] get_answer: all data received
  10.333419     [D5] get_answer: (21 bytes) => 02 00 00 c0 42 00 00 ba 42 0a 00 00 00 00 00 00
  10.333427     [D5]  00 00 00 01 04
  10.333439     [D2] Battery Status: (21 bytes) => 02 00 00 c0 42 00 00 ba 42 0a 00 00 00 00 00
  10.333447     [D2]  00 00 00 00 01 04
  10.333453     [D5] nut_find_infoval: found Done and passed (value: 2)
  10.333464     [D5] send_to_all: SETINFO ups.test.result "Done and passed"
  10.333470     [D2] Battery Status = Done and passed (2)
  10.333475     [D2] ABM Status = 4
  10.333485     [D5] send_to_all: SETINFO battery.charger.status "resting"
  10.333493     [D3] send_read_command: (4 bytes) => ab 01 3c 18
  10.333969     [D1] entering get_answer(3c)
  10.509398     [D1] get_answer: (36 bytes) => ab 0c 1f 81 dc 00 32 00 2a 00 20 43 fa 00 bb 00
  10.509422     [D1]  f2 00 00 00 02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00 85
  10.509428     [D1] get_answer: block_number = c
  10.509433     [D3] get_answer: data length = 31
  10.509439     [D2] get_answer: sequence number (1) is ok
  10.509444     [D2] get_answer: checksum is ok
  10.509449     [D2] get_answer: all data received
  10.509462     [D5] get_answer: (31 bytes) => dc 00 32 00 2a 00 20 43 fa 00 bb 00 f2 00 00 00
  10.509473     [D5]  02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00
  10.509502     [D3] send_read_command: (4 bytes) => ab 01 36 1e
  10.509990     [D1] entering get_answer(36)
  10.813417     [D1] get_answer: (85 bytes) => ab 06 50 81 4a 01 30 75 00 21 fa 00 dc 00 32 00
  10.813446     [D1]  00 00 00 bb ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04
  10.813463     [D1]  02 04 02 00 00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20
  10.813476     [D1]  20 20 52 51 50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20 7d
  10.813483     [D1] get_answer: block_number = 6
  10.813489     [D3] get_answer: data length = 80
  10.813495     [D2] get_answer: sequence number (1) is ok
  10.813500     [D2] get_answer: checksum is ok
  10.813506     [D2] get_answer: all data received
  10.813519     [D5] get_answer: (80 bytes) => 4a 01 30 75 00 21 fa 00 dc 00 32 00 00 00 00 bb
  10.813535     [D5]  ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04 02 04 02 00
  10.813549     [D5]  00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20 20 20 52 51
  10.813560     [D5]  50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20
  10.813574     [D5] send_to_all: SETINFO output.voltage.nominal "220"
  10.813581     [D5] send_to_all: DATAOK
  10.813590     [D5] send_to_all: SETINFO driver.state "init.quiet"
  10.813873     [D2] dstate_init: sock /var/db/nut/bcmxcp_usb-PW9120 open on fd 8
  10.813892     [D5] send_to_all: SETINFO driver.parameter.pollinterval "2"
  10.813901     [D5] send_to_all: SETINFO driver.parameter.synchronous "auto"
  10.813914     [D5] send_to_all: SETINFO device.mfr "Eaton"
  10.813925     [D5] send_to_all: SETINFO device.model "PW9120 3000i"
  10.813937     [D5] send_to_all: SETINFO device.serial "RQPONMLKJI      "
  10.813942     Running as foreground process, not saving a PID file
  10.813950     [D5] send_to_all: SETINFO driver.flag.allow_killpower "0"
  10.813960     [D5] send_to_all: SETFLAGS driver.flag.allow_killpower RW NUMBER
  10.813968     [D5] send_to_all: ADDCMD driver.killpower
  10.813975     [D5] send_to_all: ADDCMD driver.reload
  10.813982     [D5] send_to_all: ADDCMD driver.reload-or-exit
  10.813989     [D5] send_to_all: ADDCMD driver.reload-or-error
  10.813996     [D5] send_to_all: SETINFO driver.state "quiet"
  10.814002     [D1] Driver initialization completed, beginning regular infinite loop
  10.814009     upsnotify: failed to notify about state 2: no notification tech defined, will not spam more about it
  10.814018     [D5] send_to_all: SETINFO driver.state "updateinfo"
  10.814028     [D3] send_read_command: (4 bytes) => ab 01 34 20
  10.814508     [D1] entering get_answer(34)
  11.037384     [D1] get_answer: (57 bytes) => ab 04 34 81 31 01 00 00 dc 01 00 00 c2 12 48 42
  11.037408     [D1]  6b 0a 48 42 5c 8f d0 42 64 00 00 00 f2 12 00 00 e6 00 00 00 1b 00 00 00 b8
  11.037421     [D1]  1e 0d 40 8c 2e 5a 41 b8 0b 00 00 dc 00 00 00 b3
  11.037427     [D1] get_answer: block_number = 4
  11.037433     [D3] get_answer: data length = 52
  11.037438     [D2] get_answer: sequence number (1) is ok
  11.037443     [D2] get_answer: checksum is ok
  11.037448     [D2] get_answer: all data received
  11.037462     [D5] get_answer: (52 bytes) => 31 01 00 00 dc 01 00 00 c2 12 48 42 6b 0a 48 42
  11.037477     [D5]  5c 8f d0 42 64 00 00 00 f2 12 00 00 e6 00 00 00 1b 00 00 00 b8 1e 0d 40 8c
  11.037487     [D5]  2e 5a 41 b8 0b 00 00 dc 00 00 00
  11.037501     [D5] send_to_all: SETINFO ups.realpower "305"
  11.037512     [D5] send_to_all: SETINFO ups.power "476"
  11.037534     [D5] send_to_all: SETINFO battery.voltage "104.3"
  11.037570     [D5] send_to_all: SETINFO ups.load " 15.9"
  11.037579     [D3] send_read_command: (4 bytes) => ab 01 35 1f
  11.038057     [D1] entering get_answer(35)
  11.181398     [D1] get_answer: (28 bytes) => ab 05 17 81 00 00 00 00 00 00 00 00 00 00 00 00
  11.181415     [D1]  00 00 00 00 00 00 00 00 00 00 00 b8
  11.181420     [D1] get_answer: block_number = 5
  11.181426     [D3] get_answer: data length = 23
  11.181431     [D2] get_answer: sequence number (1) is ok
  11.181436     [D2] get_answer: checksum is ok
  11.181441     [D2] get_answer: all data received
  11.181453     [D5] get_answer: (23 bytes) => 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  11.181461     [D5]  00 00 00 00 00 00 00
  11.181474     [D3] send_read_command: (4 bytes) => ab 01 33 21
  11.181949     [D1] entering get_answer(33)
  11.309382     [D1] get_answer: (9 bytes) => ab 03 04 81 50 d3 00 84 26
  11.309393     [D1] get_answer: block_number = 3
  11.309398     [D3] get_answer: data length = 4
  11.309403     [D2] get_answer: sequence number (1) is ok
  11.309408     [D2] get_answer: checksum is ok
  11.309413     [D2] get_answer: all data received
  11.309420     [D5] get_answer: (4 bytes) => 50 d3 00 84
  11.309434     [D3] send_read_command: (4 bytes) => ab 01 3b 19
  11.309924     [D1] entering get_answer(3b)
  11.469420     [D1] get_answer: (26 bytes) => ab 0b 15 81 02 00 00 c0 42 00 00 ba 42 0a 00 00
  11.469444     [D1]  00 00 00 00 00 00 00 01 04 a5
  11.469451     [D1] get_answer: block_number = b
  11.469457     [D3] get_answer: data length = 21
  11.469463     [D2] get_answer: sequence number (1) is ok
  11.469469     [D2] get_answer: checksum is ok
  11.469475     [D2] get_answer: all data received
  11.469488     [D5] get_answer: (21 bytes) => 02 00 00 c0 42 00 00 ba 42 0a 00 00 00 00 00 00
  11.469496     [D5]  00 00 00 01 04
  11.469509     [D2] Battery Status: (21 bytes) => 02 00 00 c0 42 00 00 ba 42 0a 00 00 00 00 00
  11.469517     [D2]  00 00 00 00 01 04
  11.469523     [D5] nut_find_infoval: found Done and passed (value: 2)
  11.469534     [D2] Battery Status = Done and passed (2)
  11.469540     [D2] ABM Status = 4
  11.469552     [D3] send_read_command: (4 bytes) => ab 01 3c 18
  11.470038     [D1] entering get_answer(3c)
  11.645417     [D1] get_answer: (36 bytes) => ab 0c 1f 81 dc 00 32 00 2a 00 20 43 fa 00 bb 00
  11.645436     [D1]  f2 00 00 00 02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00 85
  11.645442     [D1] get_answer: block_number = c
  11.645448     [D3] get_answer: data length = 31
  11.645453     [D2] get_answer: sequence number (1) is ok
  11.645458     [D2] get_answer: checksum is ok
  11.645463     [D2] get_answer: all data received
  11.645475     [D5] get_answer: (31 bytes) => dc 00 32 00 2a 00 20 43 fa 00 bb 00 f2 00 00 00
  11.645487     [D5]  02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00
  11.645515     [D3] send_read_command: (4 bytes) => ab 01 36 1e
  11.645992     [D1] entering get_answer(36)
  11.917432     [D1] get_answer: (85 bytes) => ab 06 50 81 4a 01 30 75 00 21 fa 00 dc 00 32 00
  11.917456     [D1]  00 00 00 bb ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04
  11.917472     [D1]  02 04 02 00 00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20
  11.917484     [D1]  20 20 52 51 50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20 7d
  11.917490     [D1] get_answer: block_number = 6
  11.917495     [D3] get_answer: data length = 80
  11.917500     [D2] get_answer: sequence number (1) is ok
  11.917506     [D2] get_answer: checksum is ok
  11.917511     [D2] get_answer: all data received
  11.917524     [D5] get_answer: (80 bytes) => 4a 01 30 75 00 21 fa 00 dc 00 32 00 00 00 00 bb
  11.917539     [D5]  ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04 02 04 02 00
  11.917553     [D5]  00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20 20 20 52 51
  11.917564     [D5]  50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20
  11.917579     [D5] send_to_all: SETINFO driver.state "quiet"


Thanks for your answers, this is the output for those commands.

Code Select Expand

root@OPNsense:/usr/local/libexec/nut # usbconfig
ugen0.1: <Intel XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.2: <UPS Phoenixtec Power Co., Ltd> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (20mA)


Code Select Expand

root@OPNsense:/usr/local/libexec/nut # ps auxw | grep '[n]ut'
nut     6453   0.0  0.1 18440  7624  -  S    15:28     0:00.03 /usr/local/sbin/upsmon localhost


Code Select Expand

root@OPNsense:/usr/local/libexec/nut # ls -la /dev/usb
total 1
dr-xr-xr-x   2 root wheel     512 Aug 26 15:03 .
dr-xr-xr-x  10 root wheel     512 Aug 26 15:03 ..
crw-------   1 root operator 0x31 Aug 26 15:03 0.1.0
crw-------   1 root operator 0x4b Aug 26 15:03 0.1.1
crw-rw----   1 root nut      0xc9 Aug 26 15:28 0.2.0
crw-------   1 root operator 0xcb Aug 26 15:28 0.2.1


Code Select Expand

root@OPNsense:/usr/local/libexec/nut # ./bcmxcp_usb -a PW9120 -DDDDD
   0.000000     [D5] send_to_all: SETINFO driver.state "init.starting"
Network UPS Tools - BCMXCP UPS driver 0.34 (2.8.2)
USB communication subdriver 0.27
   0.000293     [D5] do_upsconf_args: confupsname=PW9120, var=driver, val=bcmxcp_usb
   0.000308     [D5] do_upsconf_args: call main_arg()
   0.000315     [D3] main_arg: var='driver' val='bcmxcp_usb'
   0.000322     [D5] do_upsconf_args: not a main_arg()
   0.000328     [D5] do_upsconf_args: this is a 'driver' setting, may we proceed?
   0.000343     [D5] do_upsconf_args: 'driver' setting already applied with this value
   0.000351     [D5] do_upsconf_args: confupsname=PW9120, var=port, val=auto
   0.000356     [D5] do_upsconf_args: call main_arg()
   0.000361     [D3] main_arg: var='port' val='auto'
   0.000371     [D5] send_to_all: SETINFO driver.parameter.port "auto"
   0.000394     [D1] Network UPS Tools version 2.8.2 (release/snapshot of 2.8.2) built with FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9); Target: x86_64-unknown-freebsd14.1; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --without-nut_monitor --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --with-freeipmi --without-ipmi --with-doc=man=auto --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/share/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.1
   0.000413     [D1] debug level is '5'
   0.000422     [D5] send_to_all: SETINFO driver.debug "5"
   0.000435     [D5] send_to_all: SETFLAGS driver.debug RW NUMBER
   0.000898     [D1] Succeeded to become_user(nut): now UID=316 GID=316
   0.000961     [D5] send_to_all: SETINFO device.type "ups"
   0.000979     [D5] send_to_all: SETINFO driver.state "init.device"
   0.000988     [D1] entering nutusb_open()
   0.001328     [D1] device 000 opened successfully
   0.004225     [D5] send_to_all: SETINFO driver.state "init.quiet"
   0.004248     [D5] send_to_all: SETINFO driver.version "2.8.2"
   0.004259     [D5] send_to_all: SETINFO driver.version.internal "0.34"
   0.004267     [D5] send_to_all: SETINFO driver.name "bcmxcp_usb"
   0.004275     [D5] send_to_all: SETINFO driver.state "init.info"
   0.004300     [D3] send_read_command: (4 bytes) => ab 01 31 23
   0.004796     [D1] entering get_answer(31)
   0.330960     [D1] get_answer: (128 bytes) => ab 01 79 01 02 04 02 04 02 00 3c 00 01 00 06 50
   0.330983     [D1]  57 39 31 32 30 52 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   0.330999     [D1]  00 00 f0 00 f0 00 00 00 41 41 00 00 00 00 51 f0 e2 00 00 00 00 00 00 00 00
   0.331018     [D1]  00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 00 00 f0 00 00 41 00 00 41
   0.331033     [D1]  00 00 f0 00 00 00 00 00 00 f0 00 00 00 1b c0 17 00 82 04 00 00 0f 10 02 00
   0.331043     [D1]  00 00 00 00 00 00 00 80 00 e4 ab 01
   0.331049     [D1] get_answer: block_number = 1
   0.331054     [D3] get_answer: data length = 121
   0.331060     [D2] get_answer: sequence number (1) is ok
   0.331066     [D2] get_answer: checksum is ok
   0.331071     [D2] get_answer: next sequence is 2
   0.331081     [D1] get_answer: block_number = 1
   0.331086     [D3] get_answer: data length = 121
   0.331092     [D2] get_answer: need to read -2 more data
   0.331097     [D1] get_answer: block_number = 1
   0.331101     [D3] get_answer: data length = 121
   0.331106     [D2] get_answer: need to read 119 more data
   0.474933     [D1] get_answer: (28 bytes) => ab 01 17 82 00 43 00 80 84 08 00 50 00 00 00 00
   0.474954     [D1]  00 00 03 00 10 1a 00 0e 00 16 00 cb
   4.937311     [D5] get_answer: (121 bytes) => 02 04 02 04 02 00 3c 00 01 00 06 50 57 39 31 32
   4.937346     [D5]  30 52 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00
   4.937363     [D5]  f0 00 00 00 41 41 00 00 00 00 51 f0 e2 00 00 00 00 00 00 00 00 00 00 00 00
   4.937385     [D5]  00 00 00 00 00 00 00 00 f0 00 00 00 00 00 f0 00 00 41 00 00 41 00 00 f0 00
   4.937400     [D5]  00 00 00 00 00 f0 00 00 00 1b c0 17 00 82 04 00 00 0f 10 02 00 00 00 00 00
   4.937408     [D5]  00 00 00 80 00
   4.937426     [D5] send_to_all: SETINFO ups.firmware "Cont:02.04 Inve:02.04"
   4.937438     [D5] send_to_all: SETINFO ups.power.nominal "3000"
   4.937446     [D5] send_to_all: SETINFO output.phases "1"
   4.937456     [D5] send_to_all: SETINFO ups.mfr "Eaton"
   4.937480     [D5] send_to_all: SETINFO ups.model "PW9120 3000i"
   4.937487     [D2] Length of meter map: 82

   4.937492     [D2] Index      Offset  Format  NUT
   4.937499     [D2] 0021       0000    f0      ups.realpower
   4.937506     [D2] 0023       0004    f0      ups.power
   4.937512     [D2] 0027       0008    41      output.frequency
   4.937519     [D2] 0028       0012    41      input.frequency
   4.937524     [D2] 0033       0016    51      battery.voltage
   4.937530     [D2] 0034       0020    f0      battery.charge
   4.937535     [D2] 0035       0024    e2      battery.runtime
   4.937541     [D2] 0056       0028    f0      input.voltage
   4.937546     [D2] 0062       0032    f0      ambient.temperature
   4.937552     [D2] 0065       0036    41      output.current
   4.937557     [D2] 0068       0040    41      output.current.nominal
   4.937563     [D2] 0071       0044    f0      ups.power.nominal
   4.937569     [D2] 0078       0048    f0      output.voltage
   4.937573     [D2]

   4.937580     [D2] Length of alarm map: 27

   4.937585     [D2] Index      Alarm   Supported
   4.937591     [D3] -001       INVERTER_AC_OVER_VOLTAGE        No
   4.937597     [D3] -001       INVERTER_AC_UNDER_VOLTAGE       No
   4.937602     [D3] -001       INVERTER_OVER_OR_UNDER_FREQ     No
   4.937607     [D3] -001       BYPASS_AC_OVER_VOLTAGE  No
   4.937612     [D3] -001       BYPASS_AC_UNDER_VOLTAGE No
   4.937618     [D3] -001       BYPASS_OVER_OR_UNDER_FREQ       No
   4.937625     [D2] 0000       INPUT_AC_OVER_VOLTAGE   Yes
   4.937630     [D2] 0001       INPUT_AC_UNDER_VOLTAGE  Yes
   4.937635     [D2] 0002       INPUT_UNDER_OR_OVER_FREQ        Yes
   4.937641     [D2] 0003       OUTPUT_OVER_VOLTAGE     Yes
   4.937646     [D2] 0004       OUTPUT_UNDER_VOLTAGE    Yes
   4.937651     [D3] -001       OUTPUT_UNDER_OR_OVER_FREQ       No
   4.937657     [D2] 0005       REMOTE_EMERGENCY_PWR_OFF        Yes
   4.937662     [D3] -001       REMOTE_GO_TO_BYPASS     No
   4.937667     [D3] -001       BUILDING_ALARM_6        No
   4.937672     [D3] -001       BUILDING_ALARM_5        No
   4.937677     [D3] -001       BUILDING_ALARM_4        No
   4.937682     [D3] -001       BUILDING_ALARM_3        No
   4.937687     [D3] -001       BUILDING_ALARM_2        No
   4.937692     [D3] -001       BUILDING_ALARM_1        No
   4.937697     [D3] -001       STATIC_SWITCH_OVER_TEMP No
   4.937702     [D3] -001       CHARGER_OVER_TEMP       No
   4.937707     [D3] -001       CHARGER_LOGIC_PWR_FAIL  No
   4.937713     [D3] -001       CHARGER_OVER_VOLTAGE_OR_CURRENT No
   4.937719     [D3] -001       INVERTER_OVER_TEMP      No
   4.937724     [D2] 0006       OUTPUT_OVERLOAD Yes
   4.937729     [D3] -001       RECTIFIER_INPUT_OVER_CURRENT    No
   4.937734     [D3] -001       INVERTER_OUTPUT_OVER_CURRENT    No
   4.937741     [D3] -001       DC_LINK_OVER_VOLTAGE    No
   4.937746     [D3] -001       DC_LINK_UNDER_VOLTAGE   No
   4.937750     [D3] -001       RECTIFIER_FAILED        No
   4.937755     [D2] 0007       INVERTER_FAULT  Yes
   4.937760     [D3] -001       BATTERY_CONNECTOR_FAIL  No
   4.937766     [D3] -001       BYPASS_BREAKER_FAIL     No
   4.937771     [D2] 0008       CHARGER_FAIL    Yes
   4.937776     [D3] -001       RAMP_UP_FAILED  No
   4.937782     [D3] -001       STATIC_SWITCH_FAILED    No
   4.937787     [D3] -001       ANALOG_AD_REF_FAIL      No
   4.937791     [D3] -001       BYPASS_UNCALIBRATED     No
   4.937796     [D3] -001       RECTIFIER_UNCALIBRATED  No
   4.937801     [D3] -001       OUTPUT_UNCALIBRATED     No
   4.937806     [D3] -001       INVERTER_UNCALIBRATED   No
   4.937811     [D3] -001       DC_VOLT_UNCALIBRATED    No
   4.937816     [D3] -001       OUTPUT_CURRENT_UNCALIBRATED     No
   4.937821     [D3] -001       RECTIFIER_CURRENT_UNCALIBRATED  No
   4.937826     [D3] -001       BATTERY_CURRENT_UNCALIBRATED    No
   4.937831     [D3] -001       INVERTER_ON_OFF_STAT_FAIL       No
   4.937836     [D3] -001       BATTERY_CURRENT_LIMIT   No
   4.937841     [D3] -001       INVERTER_STARTUP_FAIL   No
   4.937846     [D3] -001       ANALOG_BOARD_AD_STAT_FAIL       No
   4.937851     [D3] -001       OUTPUT_CURRENT_OVER_100 No
   4.937855     [D3] -001       BATTERY_GROUND_FAULT    No
   4.937860     [D3] -001       WAITING_FOR_CHARGER_SYNC        No
   4.937865     [D3] -001       NV_RAM_FAIL     No
   4.937871     [D3] -001       ANALOG_BOARD_AD_TIMEOUT No
   4.937876     [D3] -001       SHUTDOWN_IMMINENT       No
   4.937881     [D2] 0009       BATTERY_LOW     Yes
   4.937886     [D2] 0010       UTILITY_FAIL    Yes
   4.937891     [D2] 0011       OUTPUT_SHORT_CIRCUIT    Yes
   4.937896     [D2] 0012       UTILITY_NOT_PRESENT     Yes
   4.937901     [D3] -001       FULL_TIME_CHARGING      No
   4.937906     [D3] -001       FAST_BYPASS_COMMAND     No
   4.937911     [D3] -001       AD_ERROR        No
   4.937916     [D3] -001       INTERNAL_COM_FAIL       No
   4.937921     [D3] -001       RECTIFIER_SELFTEST_FAIL No
   4.937926     [D3] -001       RECTIFIER_EEPROM_FAIL   No
   4.937931     [D3] -001       RECTIFIER_EPROM_FAIL    No
   4.937937     [D3] -001       INPUT_LINE_VOLTAGE_LOSS No
   4.937942     [D2] 0013       BATTERY_DC_OVER_VOLTAGE Yes
   4.937947     [D3] -001       POWER_SUPPLY_OVER_TEMP  No
   4.937952     [D3] -001       POWER_SUPPLY_FAIL       No
   4.937957     [D3] -001       POWER_SUPPLY_5V_FAIL    No
   4.937962     [D3] -001       POWER_SUPPLY_12V_FAIL   No
   4.937967     [D2] 0014       HEATSINK_OVER_TEMP      Yes
   4.937972     [D3] -001       HEATSINK_TEMP_SENSOR_FAIL       No
   4.937977     [D3] -001       RECTIFIER_CURRENT_OVER_125      No
   4.937982     [D3] -001       RECTIFIER_FAULT_INTERRUPT_FAIL  No
   4.937987     [D3] -001       RECTIFIER_POWER_CAPACITOR_FAIL  No
   4.937992     [D3] -001       INVERTER_PROGRAM_STACK_ERROR    No
   4.937998     [D3] -001       INVERTER_BOARD_SELFTEST_FAIL    No
   4.938007     [D3] -001       INVERTER_AD_SELFTEST_FAIL       No
   4.938012     [D3] -001       INVERTER_RAM_SELFTEST_FAIL      No
   4.938017     [D3] -001       NV_MEMORY_CHECKSUM_FAIL No
   4.938022     [D3] -001       PROGRAM_CHECKSUM_FAIL   No
   4.938027     [D3] -001       INVERTER_CPU_SELFTEST_FAIL      No
   4.938032     [D3] -001       NETWORK_NOT_RESPONDING  No
   4.938037     [D3] -001       FRONT_PANEL_SELFTEST_FAIL       No
   4.938042     [D3] -001       NODE_EEPROM_VERIFICATION_ERROR  No
   4.938047     [D3] -001       OUTPUT_AC_OVER_VOLT_TEST_FAIL   No
   4.938052     [D3] -001       OUTPUT_DC_OVER_VOLTAGE  No
   4.938057     [D3] -001       INPUT_PHASE_ROTATION_ERROR      No
   4.938062     [D3] -001       INVERTER_RAMP_UP_TEST_FAILED    No
   4.938067     [D3] -001       INVERTER_OFF_COMMAND    No
   4.938073     [D3] -001       INVERTER_ON_COMMAND     No
   4.938078     [D3] -001       TO_BYPASS_COMMAND       No
   4.938083     [D3] -001       FROM_BYPASS_COMMAND     No
   4.938088     [D3] -001       AUTO_MODE_COMMAND       No
   4.938093     [D3] -001       EMERGENCY_SHUTDOWN_COMMAND      No
   4.938098     [D3] -001       SETUP_SWITCH_OPEN       No
   4.938103     [D3] -001       INVERTER_OVER_VOLT_INT  No
   4.938108     [D3] -001       INVERTER_UNDER_VOLT_INT No
   4.938114     [D3] -001       ABSOLUTE_DCOV_ACOV      No
   4.938119     [D3] -001       PHASE_A_CURRENT_LIMIT   No
   4.938124     [D3] -001       PHASE_B_CURRENT_LIMIT   No
   4.938129     [D3] -001       PHASE_C_CURRENT_LIMIT   No
   4.938133     [D3] -001       BYPASS_NOT_AVAILABLE    No
   4.938138     [D3] -001       RECTIFIER_BREAKER_OPEN  No
   4.938143     [D3] -001       BATTERY_CONTACTOR_OPEN  No
   4.938148     [D3] -001       INVERTER_CONTACTOR_OPEN No
   4.938154     [D3] -001       BYPASS_BREAKER_OPEN     No
   4.938159     [D3] -001       INV_BOARD_ACOV_INT_TEST_FAIL    No
   4.938164     [D3] -001       INVERTER_OVER_TEMP_TRIP No
   4.938169     [D3] -001       INV_BOARD_ACUV_INT_TEST_FAIL    No
   4.938174     [D3] -001       INVERTER_VOLTAGE_FEEDBACK_ERROR No
   4.938179     [D3] -001       DC_UNDER_VOLTAGE_TIMEOUT        No
   4.938184     [D3] -001       AC_UNDER_VOLTAGE_TIMEOUT        No
   4.938189     [D3] -001       DC_UNDER_VOLTAGE_WHILE_CHARGE   No
   4.938194     [D3] -001       INVERTER_VOLTAGE_BIAS_ERROR     No
   4.938199     [D3] -001       RECTIFIER_PHASE_ROTATION        No
   4.938204     [D3] -001       BYPASS_PHASER_ROTATION  No
   4.938209     [D3] -001       SYSTEM_INTERFACE_BOARD_FAIL     No
   4.938214     [D3] -001       PARALLEL_BOARD_FAIL     No
   4.938219     [D3] -001       LOST_LOAD_SHARING_PHASE_A       No
   4.938225     [D3] -001       LOST_LOAD_SHARING_PHASE_B       No
   4.938230     [D3] -001       LOST_LOAD_SHARING_PHASE_C       No
   4.938235     [D3] -001       DC_OVER_VOLTAGE_TIMEOUT No
   4.938239     [D3] -001       BATTERY_TOTALLY_DISCHARGED      No
   4.938244     [D3] -001       INVERTER_PHASE_BIAS_ERROR       No
   4.938249     [D3] -001       INVERTER_VOLTAGE_BIAS_ERROR_2   No
   4.938254     [D3] -001       DC_LINK_BLEED_COMPLETE  No
   4.938259     [D3] -001       LARGE_CHARGER_INPUT_CURRENT     No
   4.938265     [D3] -001       INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL No
   4.938270     [D3] -001       LOSS_OF_REDUNDANCY      No
   4.938275     [D3] -001       LOSS_OF_SYNC_BUS        No
   4.938280     [D3] -001       RECTIFIER_BREAKER_SHUNT_TRIP    No
   4.938285     [D3] -001       LOSS_OF_CHARGER_SYNC    No
   4.938290     [D3] -001       INVERTER_LOW_LEVEL_TEST_TIMEOUT No
   4.938295     [D3] -001       OUTPUT_BREAKER_OPEN     No
   4.938300     [D3] -001       CONTROL_POWER_ON        No
   4.938305     [D3] -001       INVERTER_ON     No
   4.938310     [D3] -001       CHARGER_ON      No
   4.938315     [D3] -001       BYPASS_ON       No
   4.938320     [D3] -001       BYPASS_POWER_LOSS       No
   4.938325     [D3] -001       ON_MANUAL_BYPASS        No
   4.938329     [D3] -001       BYPASS_MANUAL_TURN_OFF  No
   4.938334     [D3] -001       INVERTER_BLEEDING_DC_LINK_VOLT  No
   4.938340     [D3] -001       CPU_ISR_ERROR   No
   4.938345     [D3] -001       SYSTEM_ISR_RESTART      No
   4.938350     [D3] -001       PARALLEL_DC     No
   4.938355     [D3] -001       BATTERY_NEEDS_SERVICE   No
   4.938359     [D3] -001       BATTERY_CHARGING        No
   4.938364     [D2] 0015       BATTERY_NOT_CHARGED     Yes
   4.938369     [D3] -001       DISABLED_BATTERY_TIME   No
   4.938374     [D3] -001       SERIES_7000_ENABLE      No
   4.938379     [D3] -001       OTHER_UPS_ON    No
   4.938384     [D3] -001       PARALLEL_INVERTER       No
   4.938390     [D3] -001       UPS_IN_PARALLEL No
   4.938395     [D3] -001       OUTPUT_BREAKER_REALY_FAIL       No
   4.938400     [D3] -001       CONTROL_POWER_OFF       No
   4.938405     [D3] -001       LEVEL_2_OVERLOAD_PHASE_A        No
   4.938410     [D3] -001       LEVEL_2_OVERLOAD_PHASE_B        No
   4.938414     [D2] 0016       LEVEL_2_OVERLOAD_PHASE_C        Yes
   4.938420     [D3] -001       LEVEL_3_OVERLOAD_PHASE_A        No
   4.938425     [D2] 0017       LEVEL_3_OVERLOAD_PHASE_B        Yes
   4.938430     [D3] -001       LEVEL_3_OVERLOAD_PHASE_C        No
   4.938435     [D2] 0018       LEVEL_4_OVERLOAD_PHASE_A        Yes
   4.938440     [D3] -001       LEVEL_4_OVERLOAD_PHASE_B        No
   4.938445     [D2] 0019       LEVEL_4_OVERLOAD_PHASE_C        Yes
   4.938450     [D2] 0020       UPS_ON_BATTERY  Yes
   4.938455     [D3] -001       UPS_ON_BYPASS   No
   4.938460     [D3] -001       LOAD_DUMPED     No
   4.938465     [D3] -001       LOAD_ON_INVERTER        No
   4.938470     [D3] -001       UPS_ON_COMMAND  No
   4.938475     [D2] 0021       UPS_OFF_COMMAND Yes
   4.938480     [D3] -001       LOW_BATTERY_SHUTDOWN    No
   4.938484     [D3] -001       AUTO_ON_ENABLED No
   4.938489     [D3] -001       SOFTWARE_INCOMPABILITY_DETECTED No
   4.938494     [D3] -001       INVERTER_TEMP_SENSOR_FAILED     No
   4.938499     [D3] -001       DC_START_OCCURED        No
   4.938505     [D3] -001       IN_PARALLEL_OPERATION   No
   4.938509     [D3] -001       SYNCING_TO_BYPASS       No
   4.938515     [D3] -001       RAMPING_UPS_UP  No
   4.938519     [D3] -001       INVERTER_ON_DELAY       No
   4.938524     [D3] -001       CHARGER_ON_DELAY        No
   4.938529     [D3] -001       WAITING_FOR_UTIL_INPUT  No
   4.938534     [D3] -001       CLOSE_BYPASS_BREAKER    No
   4.938539     [D3] -001       TEMPORARY_BYPASS_OPERATION      No
   4.938544     [D3] -001       SYNCING_TO_OUTPUT       No
   4.938549     [D3] -001       BYPASS_FAILURE  No
   4.938555     [D3] -001       AUTO_OFF_COMMAND_EXECUTED       No
   4.938566     [D3] -001       AUTO_ON_COMMAND_EXECUTED        No
   4.938571     [D3] -001       BATTERY_TEST_FAILED     No
   4.938576     [D3] -001       FUSE_FAIL       No
   4.938581     [D3] -001       FAN_FAIL        No
   4.938586     [D3] -001       SITE_WIRING_FAULT       No
   4.938591     [D3] -001       BACKFEED_CONTACTOR_FAIL No
   4.938597     [D3] -001       ON_BUCK No
   4.938602     [D3] -001       ON_BOOST        No
   4.938607     [D3] -001       ON_DOUBLE_BOOST No
   4.938612     [D3] -001       BATTERIES_DISCONNECTED  No
   4.938617     [D3] -001       UPS_CABINET_OVER_TEMP   No
   4.938622     [D3] -001       TRANSFORMER_OVER_TEMP   No
   4.938627     [D3] -001       AMBIENT_UNDER_TEMP      No
   4.938632     [D3] -001       AMBIENT_OVER_TEMP       No
   4.938637     [D3] -001       CABINET_DOOR_OPEN       No
   4.938641     [D3] -001       CABINET_DOOR_OPEN_VOLT_PRESENT  No
   4.938646     [D3] -001       AUTO_SHUTDOWN_PENDING   No
   4.938651     [D3] -001       TAP_SWITCHING_REALY_PENDING     No
   4.938656     [D3] -001       UNABLE_TO_CHARGE_BATTERIES      No
   4.938661     [D3] -001       STARTUP_FAILURE_CHECK_EPO       No
   4.938666     [D3] -001       AUTOMATIC_STARTUP_PENDING       No
   4.938671     [D3] -001       MODEM_FAILED    No
   4.938677     [D3] -001       INCOMING_MODEM_CALL_STARTED     No
   4.938681     [D3] -001       OUTGOING_MODEM_CALL_STARTED     No
   4.938686     [D3] -001       MODEM_CONNECTION_ESTABLISHED    No
   4.938691     [D3] -001       MODEM_CALL_COMPLETED_SUCCESS    No
   4.938696     [D2]

   4.938702     [D2] Length of Config_block: 57470

   4.938707     [D2] Length of statistics map: 79

   4.938713     [D2] Length of alarm history log: 0

   4.938719     [D2] Length of topology block: 0

   4.938725     [D2] Length of max supported command length: 0

   4.938730     [D2] Length of command list: 0

   4.938735     [D2] Length of outlet_block: 0

   4.938739     [D2] Length of alarm_block: 0

   4.938748     [D3] send_read_command: (4 bytes) => ab 01 36 1e
   4.939388     [D1] entering get_answer(36)
   5.227090     [D1] get_answer: (85 bytes) => ab 06 50 81 4a 01 30 75 00 21 fa 00 dc 00 32 00
   5.227117     [D1]  00 00 00 bb ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04
   5.227133     [D1]  02 04 02 00 00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20
   5.227146     [D1]  20 20 52 51 50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20 7d
   5.227152     [D1] get_answer: block_number = 6
   5.227158     [D3] get_answer: data length = 80
   5.227164     [D2] get_answer: sequence number (1) is ok
   5.227169     [D2] get_answer: checksum is ok
   5.227175     [D2] get_answer: all data received
   5.227188     [D5] get_answer: (80 bytes) => 4a 01 30 75 00 21 fa 00 dc 00 32 00 00 00 00 bb
   5.227204     [D5]  ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04 02 04 02 00
   5.227218     [D5]  00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20 20 20 52 51
   5.227229     [D5]  50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20
   5.227243     [D5] send_to_all: SETINFO output.voltage.nominal "220"
   5.227252     [D5] send_to_all: SETINFO output.frequency.nominal "50"
   5.227261     [D5] send_to_all: SETINFO ups.serial "RQPONMLKJI      "
   5.227270     [D5] send_to_all: SETINFO device.part "05147365-5502   "
   5.227278     [D3] send_read_command: (4 bytes) => ab 01 3c 18
   5.227765     [D1] entering get_answer(3c)
   5.403062     [D1] get_answer: (36 bytes) => ab 0c 1f 81 dc 00 32 00 2a 00 20 43 fa 00 bb 00
   5.403081     [D1]  f2 00 00 00 02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00 85
   5.403087     [D1] get_answer: block_number = c
   5.403093     [D3] get_answer: data length = 31
   5.403098     [D2] get_answer: sequence number (1) is ok
   5.403103     [D2] get_answer: checksum is ok
   5.403108     [D2] get_answer: all data received
   5.403120     [D5] get_answer: (31 bytes) => dc 00 32 00 2a 00 20 43 fa 00 bb 00 f2 00 00 00
   5.403132     [D5]  02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00
   5.403142     [D5] send_to_all: SETINFO input.voltage.nominal "220"
   5.403150     [D5] send_to_all: SETINFO input.frequency.nominal "50"
   5.403158     [D5] send_to_all: SETINFO input.frequency.low "48"
   5.403166     [D5] send_to_all: SETINFO input.frequency.high "52"
   5.403174     [D5] send_to_all: SETINFO input.transfer.boost.high "187"
   5.403181     [D5] send_to_all: SETINFO input.transfer.trim.low "242"
   5.403189     [D5] send_to_all: SETINFO ups.beeper.status "enabled"
   5.403197     [D5] send_to_all: SETINFO input.transfer.low "160"
   5.403208     [D5] send_to_all: SETINFO input.transfer.high "276"
   5.403215     [D5] send_to_all: SETINFO ambient.temperature.high "40"
   5.403222     [D5] send_to_all: SETINFO battery.runtime.low "2"
   5.403230     [D5] send_to_all: ADDCMD shutdown.return
   5.403236     [D5] send_to_all: ADDCMD shutdown.stayoff
   5.403243     [D5] send_to_all: ADDCMD test.battery.start
   5.403252     [D3] send_write_command: (7 bytes) => ab 04 cf 69 e8 d5 5c
   7.473287     [D3] send_write_command: (7 bytes) => ab 04 95 ff 00 00 bd
   9.477092     [D1] entering get_answer(95)
   9.595191     [D1] get_answer: (12 bytes) => ab 09 07 81 31 95 ff 01 06 0b 0c e1
   9.595209     [D1] get_answer: block_number = 9
   9.595216     [D3] get_answer: data length = 7
   9.595222     [D2] get_answer: sequence number (1) is ok
   9.595230     [D2] get_answer: checksum is ok
   9.595237     [D2] get_answer: all data received
   9.595252     [D5] get_answer: (7 bytes) => 31 95 ff 01 06 0b 0c
   9.595265     [D5] send_to_all: ADDCMD beeper.disable
   9.595273     [D5] send_to_all: ADDCMD beeper.enable
   9.595280     [D5] send_to_all: ADDCMD beeper.mute
   9.595291     [D5] send_to_all: SETINFO output.voltage.nominal "0"
   9.595300     [D5] send_to_all: SETFLAGS output.voltage.nominal RW STRING
   9.595308     [D5] send_to_all: SETAUX output.voltage.nominal 3
   9.595322     [D5] send_to_all: SETINFO driver.state "init.updateinfo"
   9.595334     [D3] send_read_command: (4 bytes) => ab 01 34 20
   9.595824     [D1] entering get_answer(34)
   9.803169     [D1] get_answer: (57 bytes) => ab 04 34 81 2f 01 00 00 ea 01 00 00 22 ea 47 42
   9.803192     [D1]  b0 de 47 42 5c 8f d0 42 64 00 00 00 f2 12 00 00 e1 00 00 00 1a 00 00 00 e7
   9.803204     [D1]  fb 09 40 8c 2e 5a 41 b8 0b 00 00 dc 00 00 00 56
   9.803210     [D1] get_answer: block_number = 4
   9.803216     [D3] get_answer: data length = 52
   9.803222     [D2] get_answer: sequence number (1) is ok
   9.803227     [D2] get_answer: checksum is ok
   9.803232     [D2] get_answer: all data received
   9.803244     [D5] get_answer: (52 bytes) => 2f 01 00 00 ea 01 00 00 22 ea 47 42 b0 de 47 42
   9.803259     [D5]  5c 8f d0 42 64 00 00 00 f2 12 00 00 e1 00 00 00 1a 00 00 00 e7 fb 09 40 8c
   9.803269     [D5]  2e 5a 41 b8 0b 00 00 dc 00 00 00
   9.803281     [D5] send_to_all: SETINFO ups.realpower "303"
   9.803291     [D5] send_to_all: SETINFO ups.power "490"
   9.803315     [D5] send_to_all: SETINFO output.frequency "50.0"
   9.803327     [D5] send_to_all: SETINFO input.frequency "50.0"
   9.803338     [D5] send_to_all: SETINFO battery.voltage "104.3"
   9.803345     [D5] send_to_all: SETINFO battery.charge "100"
   9.803354     [D5] send_to_all: SETINFO battery.runtime "4850"
   9.803363     [D5] send_to_all: SETINFO input.voltage "225"
   9.803371     [D5] send_to_all: SETINFO ambient.temperature "26"
   9.803398     [D5] send_to_all: SETINFO output.current " 2.2"
   9.803410     [D5] send_to_all: SETINFO output.current.nominal "13.6"
   9.803426     [D5] send_to_all: SETINFO output.voltage "220"
   9.803451     [D5] send_to_all: SETINFO ups.load " 16.3"
   9.803460     [D3] send_read_command: (4 bytes) => ab 01 35 1f
   9.803938     [D1] entering get_answer(35)
   9.963196     [D1] get_answer: (28 bytes) => ab 05 17 81 00 00 00 00 00 00 00 00 00 00 00 00
   9.963214     [D1]  00 00 00 00 00 00 00 00 00 00 00 b8
   9.963220     [D1] get_answer: block_number = 5
   9.963225     [D3] get_answer: data length = 23
   9.963230     [D2] get_answer: sequence number (1) is ok
   9.963235     [D2] get_answer: checksum is ok
   9.963240     [D2] get_answer: all data received
   9.963263     [D5] get_answer: (23 bytes) => 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   9.963272     [D5]  00 00 00 00 00 00 00
   9.963285     [D3] send_read_command: (4 bytes) => ab 01 33 21
   9.963761     [D1] entering get_answer(33)
  10.091172     [D1] get_answer: (9 bytes) => ab 03 04 81 50 d3 00 84 26
  10.091184     [D1] get_answer: block_number = 3
  10.091189     [D3] get_answer: data length = 4
  10.091195     [D2] get_answer: sequence number (1) is ok
  10.091200     [D2] get_answer: checksum is ok
  10.091205     [D2] get_answer: all data received
  10.091212     [D5] get_answer: (4 bytes) => 50 d3 00 84
  10.091225     [D5] send_to_all: SETINFO ups.status "OL"
  10.091233     [D3] send_read_command: (4 bytes) => ab 01 3b 19
  10.091705     [D1] entering get_answer(3b)
  10.251210     [D1] get_answer: (26 bytes) => ab 0b 15 81 02 00 00 c0 42 00 00 ba 42 0a 00 00
  10.251234     [D1]  00 00 00 00 00 00 00 01 04 a5
  10.251242     [D1] get_answer: block_number = b
  10.251248     [D3] get_answer: data length = 21
  10.251254     [D2] get_answer: sequence number (1) is ok
  10.251260     [D2] get_answer: checksum is ok
  10.251266     [D2] get_answer: all data received
  10.251279     [D5] get_answer: (21 bytes) => 02 00 00 c0 42 00 00 ba 42 0a 00 00 00 00 00 00
  10.251287     [D5]  00 00 00 01 04
  10.251300     [D2] Battery Status: (21 bytes) => 02 00 00 c0 42 00 00 ba 42 0a 00 00 00 00 00
  10.251308     [D2]  00 00 00 00 01 04
  10.251315     [D5] nut_find_infoval: found Done and passed (value: 2)
  10.251336     [D5] send_to_all: SETINFO ups.test.result "Done and passed"
  10.251346     [D2] Battery Status = Done and passed (2)
  10.251353     [D2] ABM Status = 4
  10.251370     [D5] send_to_all: SETINFO battery.charger.status "resting"
  10.251379     [D3] send_read_command: (4 bytes) => ab 01 3c 18
  10.251863     [D1] entering get_answer(3c)
  10.411198     [D1] get_answer: (36 bytes) => ab 0c 1f 81 dc 00 32 00 2a 00 20 43 fa 00 bb 00
  10.411218     [D1]  f2 00 00 00 02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00 85
  10.411224     [D1] get_answer: block_number = c
  10.411229     [D3] get_answer: data length = 31
  10.411235     [D2] get_answer: sequence number (1) is ok
  10.411240     [D2] get_answer: checksum is ok
  10.411245     [D2] get_answer: all data received
  10.411257     [D5] get_answer: (31 bytes) => dc 00 32 00 2a 00 20 43 fa 00 bb 00 f2 00 00 00
  10.411269     [D5]  02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00
  10.411297     [D3] send_read_command: (4 bytes) => ab 01 36 1e
  10.411773     [D1] entering get_answer(36)
  10.731237     [D1] get_answer: (85 bytes) => ab 06 50 81 4a 01 30 75 00 21 fa 00 dc 00 32 00
  10.731267     [D1]  00 00 00 bb ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04
  10.731283     [D1]  02 04 02 00 00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20
  10.731296     [D1]  20 20 52 51 50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20 7d
  10.731302     [D1] get_answer: block_number = 6
  10.731308     [D3] get_answer: data length = 80
  10.731313     [D2] get_answer: sequence number (1) is ok
  10.731319     [D2] get_answer: checksum is ok
  10.731325     [D2] get_answer: all data received
  10.731337     [D5] get_answer: (80 bytes) => 4a 01 30 75 00 21 fa 00 dc 00 32 00 00 00 00 bb
  10.731353     [D5]  ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04 02 04 02 00
  10.731367     [D5]  00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20 20 20 52 51
  10.731379     [D5]  50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20
  10.731393     [D5] send_to_all: SETINFO output.voltage.nominal "220"
  10.731400     [D5] send_to_all: DATAOK
  10.731409     [D5] send_to_all: SETINFO driver.state "init.quiet"
  10.731728     [D2] dstate_init: sock /var/db/nut/bcmxcp_usb-PW9120 open on fd 8
  10.731747     [D5] send_to_all: SETINFO driver.parameter.pollinterval "2"
  10.731756     [D5] send_to_all: SETINFO driver.parameter.synchronous "auto"
  10.731767     [D5] send_to_all: SETINFO device.mfr "Eaton"
  10.731779     [D5] send_to_all: SETINFO device.model "PW9120 3000i"
  10.731790     [D5] send_to_all: SETINFO device.serial "RQPONMLKJI      "
  10.731794     Running as foreground process, not saving a PID file
  10.731803     [D5] send_to_all: SETINFO driver.flag.allow_killpower "0"
  10.731813     [D5] send_to_all: SETFLAGS driver.flag.allow_killpower RW NUMBER
  10.731820     [D5] send_to_all: ADDCMD driver.killpower
  10.731827     [D5] send_to_all: ADDCMD driver.reload
  10.731834     [D5] send_to_all: ADDCMD driver.reload-or-exit
  10.731841     [D5] send_to_all: ADDCMD driver.reload-or-error
  10.731849     [D5] send_to_all: SETINFO driver.state "quiet"
  10.731855     [D1] Driver initialization completed, beginning regular infinite loop
  10.731862     upsnotify: failed to notify about state 2: no notification tech defined, will not spam more about it
  10.731871     [D5] send_to_all: SETINFO driver.state "updateinfo"
  10.731880     [D3] send_read_command: (4 bytes) => ab 01 34 20
  10.732427     [D1] entering get_answer(34)
  10.955211     [D1] get_answer: (57 bytes) => ab 04 34 81 2d 01 00 00 e8 01 00 00 2d eb 47 42
  10.955235     [D1]  c5 e0 47 42 5c 8f d0 42 64 00 00 00 f2 12 00 00 e1 00 00 00 1a 00 00 00 e7
  10.955247     [D1]  fb 09 40 8c 2e 5a 41 b8 0b 00 00 dc 00 00 00 37
  10.955253     [D1] get_answer: block_number = 4
  10.955258     [D3] get_answer: data length = 52
  10.955263     [D2] get_answer: sequence number (1) is ok
  10.955268     [D2] get_answer: checksum is ok
  10.955274     [D2] get_answer: all data received
  10.955286     [D5] get_answer: (52 bytes) => 2d 01 00 00 e8 01 00 00 2d eb 47 42 c5 e0 47 42
  10.955301     [D5]  5c 8f d0 42 64 00 00 00 f2 12 00 00 e1 00 00 00 1a 00 00 00 e7 fb 09 40 8c
  10.955310     [D5]  2e 5a 41 b8 0b 00 00 dc 00 00 00
  10.955323     [D5] send_to_all: SETINFO ups.realpower "301"
  10.955332     [D5] send_to_all: SETINFO ups.power "488"
  10.955385     [D3] send_read_command: (4 bytes) => ab 01 35 1f
  10.955865     [D1] entering get_answer(35)
  11.115219     [D1] get_answer: (28 bytes) => ab 05 17 81 00 00 00 00 00 00 00 00 00 00 00 00
  11.115236     [D1]  00 00 00 00 00 00 00 00 00 00 00 b8
  11.115241     [D1] get_answer: block_number = 5
  11.115246     [D3] get_answer: data length = 23
  11.115252     [D2] get_answer: sequence number (1) is ok
  11.115257     [D2] get_answer: checksum is ok
  11.115262     [D2] get_answer: all data received
  11.115274     [D5] get_answer: (23 bytes) => 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  11.115282     [D5]  00 00 00 00 00 00 00
  11.115294     [D3] send_read_command: (4 bytes) => ab 01 33 21
  11.115768     [D1] entering get_answer(33)
  11.227197     [D1] get_answer: (9 bytes) => ab 03 04 81 50 d3 00 84 26
  11.227207     [D1] get_answer: block_number = 3
  11.227212     [D3] get_answer: data length = 4
  11.227218     [D2] get_answer: sequence number (1) is ok
  11.227223     [D2] get_answer: checksum is ok
  11.227227     [D2] get_answer: all data received
  11.227235     [D5] get_answer: (4 bytes) => 50 d3 00 84
  11.227248     [D3] send_read_command: (4 bytes) => ab 01 3b 19
  11.227721     [D1] entering get_answer(3b)
  11.387244     [D1] get_answer: (26 bytes) => ab 0b 15 81 02 00 00 c0 42 00 00 ba 42 0a 00 00
  11.387267     [D1]  00 00 00 00 00 00 00 01 04 a5
  11.387275     [D1] get_answer: block_number = b
  11.387281     [D3] get_answer: data length = 21
  11.387287     [D2] get_answer: sequence number (1) is ok
  11.387293     [D2] get_answer: checksum is ok
  11.387298     [D2] get_answer: all data received
  11.387312     [D5] get_answer: (21 bytes) => 02 00 00 c0 42 00 00 ba 42 0a 00 00 00 00 00 00
  11.387319     [D5]  00 00 00 01 04
  11.387333     [D2] Battery Status: (21 bytes) => 02 00 00 c0 42 00 00 ba 42 0a 00 00 00 00 00
  11.387342     [D2]  00 00 00 00 01 04
  11.387348     [D5] nut_find_infoval: found Done and passed (value: 2)
  11.387359     [D2] Battery Status = Done and passed (2)
  11.387364     [D2] ABM Status = 4
  11.387377     [D3] send_read_command: (4 bytes) => ab 01 3c 18
  11.387859     [D1] entering get_answer(3c)
  11.547245     [D1] get_answer: (36 bytes) => ab 0c 1f 81 dc 00 32 00 2a 00 20 43 fa 00 bb 00
  11.547269     [D1]  f2 00 00 00 02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00 85
  11.547276     [D1] get_answer: block_number = c
  11.547282     [D3] get_answer: data length = 31
  11.547288     [D2] get_answer: sequence number (1) is ok
  11.547293     [D2] get_answer: checksum is ok
  11.547298     [D2] get_answer: all data received
  11.547311     [D5] get_answer: (31 bytes) => dc 00 32 00 2a 00 20 43 fa 00 bb 00 f2 00 00 00
  11.547323     [D5]  02 01 a0 00 14 01 00 00 00 00 28 01 01 00 00
  11.547353     [D3] send_read_command: (4 bytes) => ab 01 36 1e
  11.547834     [D1] entering get_answer(36)
  11.835244     [D1] get_answer: (85 bytes) => ab 06 50 81 4a 01 30 75 00 21 fa 00 dc 00 32 00
  11.835272     [D1]  00 00 00 bb ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04
  11.835288     [D1]  02 04 02 00 00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20
  11.835300     [D1]  20 20 52 51 50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20 7d
  11.835306     [D1] get_answer: block_number = 6
  11.835311     [D3] get_answer: data length = 80
  11.835317     [D2] get_answer: sequence number (1) is ok
  11.835322     [D2] get_answer: checksum is ok
  11.835327     [D2] get_answer: all data received
  11.835339     [D5] get_answer: (80 bytes) => 4a 01 30 75 00 21 fa 00 dc 00 32 00 00 00 00 bb
  11.835355     [D5]  ff 84 00 00 00 00 01 00 a7 00 00 00 00 00 04 08 04 08 00 00 04 02 04 02 00
  11.835369     [D5]  00 00 00 00 00 00 1f 30 35 31 34 37 33 36 35 2d 35 35 30 32 20 20 20 52 51
  11.835379     [D5]  50 4f 4e 4d 4c 4b 4a 49 20 20 20 20 20 20
  11.835394     [D5] send_to_all: SETINFO driver.state "quiet"


PS: On /api/nut/diagnostics/upsstatus I always get "{"response":null}"

You need to pick the right setting from the dropdown menu.

That is why I pasted the API return info, so others can check the settings I have.
I guess I am missing some extra parameter or maybe the listen address should be different...
On that help page there is no info for USB devices.

EDIT: When running from console, I get several of this messages

get_answer: wrong header 0xab vs 17

But then it get the correct info starting with the 0xAB char.
Following nut suggestions I tried a different cable and a different port.

upsdebugx(2, "get_answer: wrong header 0xab vs %02x", my_buf[0]);
         /* Sometime we read something wrong. bad cables? bad ports? */

did you reboot after installing nut?

Yes, I did. Before rebooting I didn't get any response from command line. After rebooting it started responding but on the web manager everything stayed the same...

Hi everyone,
I installed the NUT package and everything is working fine on the command line (OPNsense v24.7.2).
Running "./bcmxcp_usb -a PW9120 -DDDDD" will return all the info from the UPS.
But on the web manager I get problems.

Diagnostics will not return anything, only showing a blank square.
On configuration when I try to start the service it will later show this message on the console:

Broadcast Message from root@OPNsense.localdomain
        (no tty) at 14:37 UTC...

UPS PW9120 is unavailable

This is my /api/nut/settings/get

{"nut":{"general":{"enable":"1","mode":{"standalone":{"value":"standalone","selected":1},"netclient":{"value":"netclient","selected":0}},"name":"PW9120","listen":{"127.0.0.1":{"value":"127.0.0.1","selected":1},"::1":{"value":"::1","selected":1}}},"account":{"admin_password":"Password","mon_password":"Password"},"usbhid":{"enable":"0","args":{"port=auto":{"value":"port=auto","selected":1}}},"apcsmart":{"enable":"0","args":{"port=auto":{"value":"port=auto","selected":1}}},"apcupsd":{"enable":"0","hostname":"localhost","port":""},"bcmxcpusb":{"enable":"1","args":{"port=auto":{"value":"port=auto","selected":1}}},"blazerusb":{"enable":"0","args":{"port=auto":{"value":"port=auto","selected":1}}},"blazerser":{"enable":"0","args":{"port=auto":{"value":"port=auto","selected":1}}},"netclient":{"enable":"0","address":"","port":"3493","user":"","password":""},"qx":{"enable":"0","args":{"port=auto":{"value":"port=auto","selected":1}}},"riello":{"enable":"0","args":{"port=auto":{"value":"port=auto","selected":1}}},"snmp":{"enable":"0","args":{"community=public":{"value":"community=public","selected":1}}}}}

What could be wrong?
Thanks!!

EDIT: Corrected by AI

Code Select Expand

export default class Smart extends BaseTableWidget {
    constructor() {
        super();
        this.tickTimeout = 300;
        this.disks = null;
    }

    getMarkup() {
        const $container = $('<div></div>');
        const $smarttable = this.createTable('smart-table', {
            headerPosition: 'left',
        });
        $container.append($smarttable);
        return $container;
    }

    async onWidgetTick() {
        if (this.disks && this.disks.devices) {
            for (const device of this.disks.devices) {
                try {
                    const data = await ajaxCall("/api/smart/service/info", { type: "H", device });
                    const health = data.output.includes("PASSED");
                    $(`#${device}`).css({ color: health ? "green" : "red", fontSize: '150%' });
                    $(`#${device}`).text(health ? "OK" : "FAILED");
                } catch (error) {
                    super.updateTable('smart-table', [[["Error"], $(`<span>${this.translations.nosmart} ${device}: ${error}</span>`).prop('outerHTML')]]);
                }
            }
        }
    }

async onMarkupRendered() {
        try {
            this.disks = await ajaxCall("/api/smart/service/list", {});
            const rows = [];
            for (const device of this.disks.devices) {
                const field = $(`<span id="${device}">`).prop('outerHTML');
                rows.push([[device], field]);
            }
            super.updateTable('smart-table', rows);
        } catch (error) {
            super.updateTable('smart-table', [[["Error"], $(`<span>${this.translations.nodisk}: ${error}</span>`).prop('outerHTML')]]);
        }
    }
}

Code Select Expand

<metadata>
    <smart>
        <filename>Smart.js</filename>
        <endpoints>
            <endpoint>/api/smart/service/list</endpoint>
            <endpoint>/api/smart/service/info</endpoint>
        </endpoints>
        <translations>
            <title>SMART Status</title>
            <nodisk>Error fetching disk list</nodisk>
            <nosmart>Error fetching SMART info for device</nosmart>
        </translations>
    </smart>
</metadata>

PS: Some stuff that should be fixed in the documentation.
1) To import the base js I had to use its relative path.
2) tickTimeout is in seconds and not ms

@franco
Is there a template or an already made widget for POST plugins?
I am not a coder, but, I can read the code and adapt it accordingly.

I was able to get the S.M.A.R.T results from command line by calling the API.
I need the widget because I always use old HDDs for the routers :)

EDIT: On curl it is working correctly, testin REST API I always get "invalid device name" doesn't matter what I try
Post

Code Select Expand

POST /api/smart/service/info?type=j HTTP/2
Host: 10.10.200.100
Content-Type: application/json
Authorization: Basic base64encode($key:$secret)
Content-Length: 6

type=j

Receive

Code Select Expand

HTTP/2 200 OK
Set-Cookie: PHPSESSID=e58a4c0fa3a40c2d1abb2655f864e631; path=/; secure; HttpOnly
Expires: Thu, 19 Nov 1981 08:52:00 GMT
Cache-Control: no-store, no-cache, must-revalidate
Pragma: no-cache
Content-Type: application/json; charset=UTF-8
Date: Thu, 08 Aug 2024 18:28:00 GMT
Server: OPNsense

{"message":"Invalid device name"}

EDIT2:
Stupid me, has to be in JSON format  :-X
"{"type": "H","device": "ada0"}"