Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - callaman

#1
22.7 Legacy Series / Re: SYSLOG via Specific Interface
January 04, 2023, 12:42:17 PM
Hi there.

Omitted external IP addresses, for obvious reasons.


172.16.8.0/24      link#2             U          vmx1    <<<< SYSLOG SERVER RESIDES IN THIS NETWORK
172.16.8.16        link#2             UHS         lo0
172.16.12.0/24     link#3             U          vmx2
172.16.12.16       link#3             UHS         lo0
172.16.15.0/24     link#12            U          vmx6
172.16.15.16       link#12            UHS         lo0
172.16.18.0/24     link#4             U          vmx3
172.16.18.16       link#4             UHS         lo0
172.16.21.0/24     link#11            U          vmx5
172.16.21.16       link#11            UHS         lo0
172.16.24.0/24     link#13            U          vmx7
172.16.24.16       link#13            UHS         lo0
172.16.98.0/24     link#10            U          vmx4
172.16.98.16       link#10            UHS         lo0
#2
22.7 Legacy Series / Re: SYSLOG via Specific Interface
January 03, 2023, 01:06:03 PM
Hi and, apologies for a delayed response.
Yes, there is a static route. (It did occur to me to mention this while writing up the descritpion of the issue).
#3
22.7 Legacy Series / SYSLOG via Specific Interface
December 23, 2022, 02:03:42 PM
Hi all.
Wanted to setup syslog out of one interface to talk to a management network but all syslog traffic appears to want to route out of the WAN.
There are lots of guides that offer info on how to configure the logging target etc in the user interface but nothing about telling it to go via a nominated interface to reach the target.
Any ideas?


Thanks