Show Posts
1
Hardware and Performance / Re: [Work In Progress] OPNsense Ported into ARM Devices
« on: November 03, 2022, 08:25:25 am »
I followed what I understood on https://yrzr.tk/opnsense-22-for-aarch64/
but can't get RPI4B system to boot. I don't have a serial adapter so unfortunately can't troubleshoot a lot.
Here is what I did:
Downloaded:
OPNsense-22.1.10-OpenSSL-arm-aarch64-RPI.img.xz
and
OPNsense-22.7.5-OpenSSL-arm-aarch64-RPI.img.xz
Used Raspberry Pi Imager to write the img to file. Renamed config_rpi4.txt to config.txt and deleted config_rpi3.txt . Put the newly flashed card into RPI4 and powered it up. It gets to the rainbow/multicolour splash screen and then nothing. This was the case for both img files, written with either Raspberry Pi Imager or Balena Etcher, unarchived first or provided as .xz to the imager. I tried this on two RPI4.
I tried booting the same card on RPI3B+ with config_rpi3.txt renamed to config.txt and it booted, showing the boot process. I set a static IP and then used config_rpi4.txt renamed to config.txt to boot rpi4. Got the rainbow screen but could still access the system. So there is something wrong with the video.
Is there something wrong with the default config_rpi4.txt? What could I try to get the console to show on hdmi output?
Thanks
but can't get RPI4B system to boot. I don't have a serial adapter so unfortunately can't troubleshoot a lot.
Here is what I did:
Downloaded:
OPNsense-22.1.10-OpenSSL-arm-aarch64-RPI.img.xz
and
OPNsense-22.7.5-OpenSSL-arm-aarch64-RPI.img.xz
Used Raspberry Pi Imager to write the img to file. Renamed config_rpi4.txt to config.txt and deleted config_rpi3.txt . Put the newly flashed card into RPI4 and powered it up. It gets to the rainbow/multicolour splash screen and then nothing. This was the case for both img files, written with either Raspberry Pi Imager or Balena Etcher, unarchived first or provided as .xz to the imager. I tried this on two RPI4.
I tried booting the same card on RPI3B+ with config_rpi3.txt renamed to config.txt and it booted, showing the boot process. I set a static IP and then used config_rpi4.txt renamed to config.txt to boot rpi4. Got the rainbow screen but could still access the system. So there is something wrong with the video.
Is there something wrong with the default config_rpi4.txt? What could I try to get the console to show on hdmi output?
Thanks