"I have exactly the same machine and just installed opnsense v22.7 on to it . I have noticed that it's running quite hot at 92C.
Can you please check the Temp of your machine - you may have to add Thermal Widget in the dashboard and select the correct thermal sensors in System --> Settings -- > Miscellaneous. I am just trying to figure out if high Temp is normal or if something is wrong with my machine.
Quote from: niels@nooby.tech on July 13, 2022, 10:48:38 AM
Hi all,
First time user of Opnsense. I've got a very simple setup: 1 WAN (Cable connection 300Mbs), 1 LAN on Intel Pro 1000, currently no Vlans. I'm running some tests as I want to use this box for a webfilter, OpenVPN access. Currently never more than 2 clients connected through a Unify AP and I have continious crashes on the system. It just keeps rebooting during Team calls. No straight away, but anywhere between 2-20 minutes in. A simultaneous speed test sometimes triggers it, but not always. I've tried everything I can think off.
The crashes are only during MS Teams videocalls. CPU/mem/disk usage are still very low during this point. No error appears just a sudden reboot like the power was cut. It doesn't seem to get too hot (as far as I can tell).
I tried switching off all hardware accelleration on the interfaces, I played with any setting I could find but nothing seems to help. Any advice on how to fix/diagnose the issue? Thanks in advance.
Current Config:
OPNsense 22.1.10-amd64
FreeBSD 13.0-STABLE
OpenSSL 1.1.1q 5 Jul 2022
On a fujitsu S920 (AMD GX-222GC SOC with Radeon R5E Graphics (2 cores, 2 threads), 4GB ram, 8GB SSD) with a PCI Epxress Intel PRO1000 dual ports.
