Messages

Hallo zusammen,

ich habe mich mal an die folgende Anleitung probiert. https://forum.opnsense.org/index.php?topic=23339.0

Leider bekomme ich es nicht zum laufen. Bis zum Punkt rating (Punkt 13. Part 5) komme ich. Ich über extern bekomme ich keine Verbindung zum Dienst.

Kann mir jemand auf die Sprünge helfen.

Anbei noch die Konfig vom HA Proxy:

Code Select Expand

#
# Automatically generated configuration.
# Do not edit this file manually.
#

global
    uid                         80
    gid                         80
    chroot                      /var/haproxy
    daemon
    stats                       socket /var/run/haproxy.socket group proxy mode 775 level admin
    nbproc                      1
    nbthread                    4
    hard-stop-after             60s
    no strict-limits
    maxconn                     1000
    tune.ssl.default-dh-param   4096
    spread-checks               2
    tune.bufsize                16384
    tune.lua.maxmem             0
    log                         /var/run/log local0 debug
    lua-prepend-path            /tmp/haproxy/lua/?.lua

defaults
    log     global
    option redispatch -1
    maxconn 5000
    timeout client 30s
    timeout connect 30s
    timeout server 30s
    retries 3
    default-server init-addr last,libc
    default-server maxconn 5000

# autogenerated entries for ACLs


# autogenerated entries for config in backends/frontends

# autogenerated entries for stats




# Frontend: www ()
frontend www
    bind 0.0.0.0:80 name 0.0.0.0:80
    mode http
    option http-keep-alive
    # tuning options
    timeout client 30s

    # logging options
    # ACL: find_acme_challenge
    acl acl_635be49474e597.79861541 path_beg -i /.well-known/acme-challenge/

    # ACTION: redirect_acme_challenges
    use_backend acme_challenge_backend if acl_635be49474e597.79861541

# Frontend: 0_SNI_frontend (Listening on 0.0.0.0:80, 0.0.0.0:443)
frontend 0_SNI_frontend
    bind 0.0.0.0:443 name 0.0.0.0:443
    bind 0.0.0.0:80 name 0.0.0.0:80
    mode tcp
    default_backend SSL_backend
    # tuning options
    timeout client 30s

    # logging options

# Frontend: 1_HTTP_frontend (Listening on 127.4.4.3:80)
frontend 1_HTTP_frontend
    bind 127.4.4.3:80 name 127.4.4.3:80 accept-proxy
    mode http
    option http-keep-alive
    option forwardfor
    # tuning options
    timeout client 30s

    # logging options
    # ACL: NoSSL_condition
    acl acl_639f0c4ad0fc49.48407927 ssl_fc

    # ACTION: HTTPtoHTTPS_rule
    http-request redirect scheme https code 301 if !acl_639f0c4ad0fc49.48407927

# Frontend: 1_HTTPS_frontend (Listening on 127.4.4.3:443)
frontend 1_HTTPS_frontend
    http-response set-header Strict-Transport-Security "max-age=63072000; includeSubDomains; preload"
    bind 127.4.4.3:443 name 127.4.4.3:443 accept-proxy ssl curves secp384r1  no-sslv3 no-tlsv10 no-tlsv11 no-tls-tickets ciphers ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256 ciphersuites TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256 alpn h2,http/1.1 crt-list /tmp/haproxy/ssl/639f116025c934.97390838.certlist
    mode http
    option http-keep-alive
    option forwardfor
    # tuning options
    timeout client 15m

    # logging options

    # ACTION: PUBLIC_SUBDOMAINS_map-rule
    # NOTE: actions with no ACLs/conditions will always match
    use_backend %[req.hdr(host),lower,map_dom(/tmp/haproxy/mapfiles/639f0e0e3acac0.41605309.txt)]

# Backend: acme_challenge_backend (Added by ACME Client plugin)
backend acme_challenge_backend
    # health checking is DISABLED
    mode http
    balance source
    # stickiness
    stick-table type ip size 50k expire 30m 
    stick on src
    # tuning options
    timeout connect 30s
    timeout server 30s
    http-reuse safe
    server acme_challenge_host 127.0.0.1:43580

# Backend: SSL_backend ()
backend SSL_backend
    # health checking is DISABLED
    mode tcp
    balance source
    # stickiness
    stick-table type ip size 50k expire 30m 
    stick on src
    # tuning options
    timeout connect 30s
    timeout server 30s
    server SSL_Server 127.4.4.3 send-proxy-v2 check-send-proxy

# Backend: kimai_backend (kimai)
backend kimai_backend
    # health checking is DISABLED
    mode http
    balance source
    # stickiness
    stick-table type ip size 50k expire 30m 
    stick on src
    # tuning options
    timeout connect 30s
    timeout server 30s
    http-reuse safe
    server kimai 192.168.40.205:80 ssl verify none

# Backend: freshrss_backend (freshrss)
backend freshrss_backend
    # health checking is DISABLED
    mode http
    balance source
    # stickiness
    stick-table type ip size 50k expire 30m 
    stick on src
    # tuning options
    timeout connect 30s
    timeout server 30s
    http-reuse safe
    server freshrss 192.168.40.211:8085 ssl verify none



# statistics are DISABLED

Hallo zusammen,

ich habe in OPNsenes Wireguard eingerichtet und funktioniert soweit auch.

Mit dem Android Handy funktioniert alles, aber mit Windows 10 Client komme ich nicht in das Lokale LAN. Nur Internet funktioniert.

Hatte jetzt die Verbindung in Windows schon von Public auf Privat gestellt, hat aber auch nicht geholfen. Da es mit den Handy klappt, gehe ich jetzt nicht von ein Problem der OPNsense aus. Hat jemand einen Tipp.

Wireguard wurde laut https://docs.opnsense.org/manual/how-tos/wireguard-client.html eingerichtet.

Gruß Sebastian