Messages

1

24.7 Production Series / Re: Protectli FW2B Upload Speeds Slow

« on: November 11, 2024, 04:28:57 pm »

Well i just got the new Cable Modem from Spectrum, and replace it and i still get that delicious 900 down / 5 up..lol

I do not know what else to try....WAN is at em0 and LAN is at em1...not sure what the deal is at this point or what else to try...

any ideas?

Like look at these speeds:
1089.7 Mbps download
 0.06 Mbps upload
 Latency: 5 ms


LOL ive never received 1G down like this lol

2

24.7 Production Series / Re: Protectli FW2B Upload Speeds Slow

« on: November 09, 2024, 09:36:33 pm »

I have done all of it and i still cant see any improvement ....

596.8 Mbps download
3.24 Mbps upload
Latency: 4 ms

770.8 Mbps download
2.46 Mbps upload
Latency: 5 ms

3

24.7 Production Series / Re: Protectli FW2B Upload Speeds Slow

« on: November 08, 2024, 08:48:19 pm »

Noteworthy Differences Between 24.7.7 and 24.7.8

The 24.7.8 update introduced patches to Intel network drivers (ixgbe, igb, igc, and e1000), which could be directly impacting your upload speeds if you’re using Intel NICs. The previous 24.7.7 version does not include these driver updates, suggesting it might be more stable for your setup.

4

24.7 Production Series / Re: Protectli FW2B Upload Speeds Slow

« on: November 08, 2024, 08:19:55 pm »

Have you rolled back to the previous version to see if the issue goes away? right now im just going through the motions as to what could be blocking the traffic.. i thought it was one of the security features we have but still nothing ...so frustrating lol

5

24.7 Production Series / Re: Protectli FW2B Upload Speeds Slow

« on: November 08, 2024, 08:08:52 pm »

I also have the problem and have the exact same firewall , maybe its a driver issue? maybe we just need to go back to an older version?  but looking more towards Protectli maybe we need to flash something?

6

24.1 Legacy Series / Re: Upload speeds are very slow

« on: November 08, 2024, 08:14:15 am »

I'm also having the same issue, noticed that i can barely get 8mbps up..

7

22.7 Legacy Series / NAT Loopback 22.7

« on: August 07, 2022, 05:20:22 am »

 So anyone else having problems with the NAT Loopback?

This used to work fine before moving to 22.7, I thought just creating a rule in the port forward was enough as long as NAT reflection was enabled.

Do i also need to create a rule in the Rules -> Loopback section?

It sure does not seem to work whatever i configure there, not seeing much of an explanation on the DOCs that i can see.

Is this broken in the new 22.7?