Messages

Everything worked.

Firmware update and drivers are installed.

What I did is the Intel E810 card installed instead of the E710 and I also installed firmware and drivers there.

Performance is worlds better.
9Gbps ​​down and up.

https://www.speedtest.net/my-result/d/9b8a6daa-0dfb-47f7-95f1-3e9f71f953d3

What I don't understand in the other thread is that with the DDP packages.

What I also have to say, in the speed test I have a maximum CPU load of 15%. Shouldn't there be more?

I don't understand how an opnsense appliance with, in my opinion, less power should be able to do over 20Gbps.

Thank you very much for the Help cookiemonster.

Thank you very much for explaining this to me so well and precisely.

You helped me really much. All worked.
Now i learned how to transfer Files betwen my PC and the opnsense Box.
I doesnt found a way. I tried it days before and read so much, but all tutorials
that i found startet when the Files are allready on the Box.

Im now on point 7 and try to install the Firmware.

I have to figure it out how to start nvmeupdate64e.
I always get the error command not found because i doesnt know i need ./ to start nveupdate.

Now all worked and the Firmwareupdate is installed.
But how can i check and / or updating the intel NIC Drivers?

Thanks for your replys.

Finding the Packages is not a Problem, thank you.
Downloading direct to the opnsense Box and starting the update is the Problem.

Sure, i know i can dissassemble the box and do the update on a Windows Machine. But i want to learn, so i have to figure it out how i do it direct on the box.

Same with the Speeds. I see theres some appliances to buy that can handle 25Gb/s but i think i have more CPU Power that the appliance so it should work.

I tried it on another Workstation with the Same NÎC but with Dual Xeon 2680V4 and 64GB Ram. Clean install and direct Testing without any changes and i got about 2Gb/s..

Can someone help me with the commands for downloading and installing the Intel NIC Firmware and drivers?

Glad you found the answer. Just research on how to them or ask the person who has done them to assist you with it.

I tried to contact the User about a Week ago. No Answer.

Hi there.

No difference if Zenarmour is bypassed, in passive mode or on.

Thank you for your reply.

I only see 25 Gb/s when i direct connect my Computer to the Fiber connection.
Without the opnsense box between.

Im not sure how i can turn off Zenarmour ( deinstal it? ).

I also found a Thread with a similar Problem.
https://forum.opnsense.org/index.php?topic=24302.0

My nic isnt at the latest firmware but i dont managed to update it.

Regards

Im testing it from a computer in the lan to speedtest.net.
Speedtest Server is the one from the ISP.

Managed to install Speedtest on the Opnsense Box.
CLI SSH testing:
Speedtest by Ookla

      Server: Init7 AG - Winterthur (id: 43030)
         ISP: Init7 (Switzerland) Ltd.
Idle Latency:     0.87 ms   (jitter: 0.03ms, low: 0.84ms, high: 0.93ms)
    Download:  8876.95 Mbps (data used: 5.3 GB)                                 
                  3.56 ms   (jitter: 1.50ms, low: 0.59ms, high: 18.97ms)
      Upload: 17889.00 Mbps (data used: 23.7 GB)                               
                  0.73 ms   (jitter: 0.37ms, low: 0.56ms, high: 6.20ms)
Packet Loss:     0.0%

Hi there.

Im an absolute Newbie in Linux / BSD / Opnsense, so please dont bite me.

Ive got a 25GB/s symetrical Fiber connection from my ISP and i tried to make an Opnsense Router because i doenst find a payable Router that can handle at least 15GB/s....

I have build a Test System:

Intel 9900
32GB Ram
Samsung nvme 1tb
Intel xxv710-DA2 NIC

Setting up opnsense and my Speeds are about 7GBs Down and 3GBs up.
I tried different tuneables but... im not sure if i make it right.

Can someone help and explain me how to find the Problem and solve it?

Ich glaube nicht.

Habe testweise mal Speedtest auf dem Opnsense Rechner installiert.....

Sind das dann werte ohne Zenarmor? Hab Speedtest direkt auf der Shell ausgeführt der OPNsense Kiste.

Sehe momentan auch nur den CCR2216-1G-12XS-2XQ von Mikrotik der "bezahlbar" wäre.

Achso.
Oje habe gehofft ich erreiche wenigstens 15....

Naja.
Dan gucke ich mal weiter was ich da machen / ändern kann.

Die Werte sind mit Zenarmor.

Habe mal das Paket gestoppt und gemessen. Bekomme aber die gleichen Werte.
Bin mir jedoch nicht sicher ob dann wirklich alles deaktiviert ist oder eben nicht. -.- wie gesagt, neuling.

Irgendwie habe ich mir mehr "erhofft".

Hallo liebe Community.

Ich kam vor kurzem in den Genuss einer 25Gbit synchron Glasfaserleitung von meinem ISP.
Da ich gerne lerne und neues ausprobiere wollte ich so auch gleich einen Opnsense Router bauen.

Ich bin jedoch ein Neuling auf diesem Gebiet und benötige eure Kritik, Hilfe und Weisheiten.

Meine Fiber Connection ist seit heute aufgeschaltet und die Hardware für Opnsense in Betrieb.
Momentan noch alles als Testaufbau auf einem Tisch.

Hardware OPNSENSE:

Intel i9 9900
Asus z390 TUF Pro Gaming
32 GB DDR4
Samsung 980 m2 SSD 1TB
Intel xxv710-DA2 Dual SFP28 NIC. mit transcievern

OPNsense 22.1.8_1-amd64
FreeBSD 13.0-STABLE
OpenSSL 1.1.1o 3 May 2022

Grundinstallation ohne "Tweaks" jedoch mit Sensei

Mein Computer hängt direkt am Opnsense über DAC an derselben XXV710 Intel Karte.

Leider erreiche ich nur sehr schlechte Speeds...

Wie kann ich am besten den Flaschenhals finden?
Was könntet ihr mir als vorgehen empfehlen?

Ich lese mich schon einige Zeit ins Thema ein, behaupte jedoch das ich erst an der Oberfläche gekratzt habe. Bevor ich jetzt mit meinem Halbwissen nur Mist baue wollte ich euch um Rat fragen.