Messages

1

22.1 Legacy Series / Unbound error when i configure gateway group

« on: June 15, 2022, 01:25:12 pm »

Hello good guys and girls how are you doing?

I have a question (maybe a noob one) from my first time trying to use opnsense in production can you help me out?

Client has 2 WANS so the setup is pretty basic 1- LAN 2 VLAN (not in use yet) 3 WAN 1 4 WAN 2


LAN is 192.168.7.254 plugged into a 24 port switch to give everyone DHCP/DNS and failover internet
VLAN is a 10.10.7.0 separated LAN that is currently not in use as in configured but not plugged in
WAN 1 is a PPOE 100 mb fiber that gives me 2 GW one IPv4 and one IPv6
WAN 2 is a Local IP-bound ADSL that has a 192.168.1.1 gateway and the firewall as 192.168.1.2 static ip

Problem:

At first unbound DNS worked flawlesly. the problem started when i configured the second WAN,created a gateway group with those (PPOE_IPv4 Tier 1/ADSL GW Tier 2)

Then i edited the LAN to all default rule changing it,s gateway from WAN1 to said gateway group

After that Unbound no longer works as in it gives a timeout to every query sent to it (tested via nslookup)

if i:

1- remove the gateway group from said default rule

or

2- use another external dns in dhcp

it works ok so i guess the rule itself and the gateway group is not the problem the problem is in as how unbound is getting it,s external acess to awnser the query,s i guess

iam using the most up to date opnsense release under a appliance i got from ebuy....

any ideas?