Messages

The interfaces are working fine.
No problems in terms of hardware.

The suspicious back to OpnSense config and why it is not giving leases.

If somebody has a tip, it will be very well received.

Thanks.

TPLink AP, DHCP disabled, connected to ADSL Router...

Works fine. No problems with leases.

Next try is take a look at the network interfaces.
Try to check if it is working fine or are going down from time to time.

My TP-Link IP is static too, in the same subnet of OpnSense.
I've delete DNS server/Gateway and tried again... Unfortunatelly no lucky.

Tried to connect through cable and also does not got IP.

I'm suspecting that my TP-Link is the problem and, who knows why, drop the connection to OpnSense from time to time, because I didn't find anything, no blocking, no DHCP problems, absolutely nothing in the logs.

I'll try to connect TP-Link AP to ADSL modem and check whow DHCP will behave.

Forgot the attachment....

Hi, sorry the delay.

I've attached the screenshot of my recent general log.
I think that has nothing wrong.

The OpnSense is driving me nuts. kkkkk

Thanks

Adding more info...

Using AP with DHCP enabled: when I lose connection, if I ping AP from OpnSense, I get reponses, but If I ping OpnSense from AP or any ohter computer connected to AP, I've got no reponses.
I think that this behavior discard problems with interface.

I'm using a TP-Link WR840N.
When I select the operation setting as AP, it remain with DHCP enable. I have to disable it.

I still do not understand what could be wrong. It looks like that when I disable the DHCP on AP, the leases requests do not reach Opnsense and I don't realize why.
I tried to let AP IP on static ARP but it didn't work too.

Another strange thing is if I let AP with DHCP enabled, I have to reload OpnSense all Services to be able to connect GUI and have internet access. But this connection endures for a short time and I have to reload all services again to get connection again.
The same happens if I change wifi network and back to OpnSense wifi network.

My OpnSense is driving me nuts. kkkkk

Forgot the attachment... kkkk

hushcoden,

Here the screenshot..
I've removed the gateway and DNS from the configuration, and still no success.

Thanks.

Hi hushcoden,

I did it but no success...
When disable DHCP server of AP, the OpnSense does not give lease and nothing connect on wifi.

Attached the last log.
Hope it give some tip.

Thanks

Hi Bonkerton,

I have a laptop connected with cable and static IP that works fine.
The problem is with wifi.

When I reload all services on OpnSense, I can get IP on some resources like my laptop and my Android but other ones I didn't, like my Android tablet.

However, suddenly my laptop lost connection to OpnSense and I'm not able to access GUI manager anymore, then I have to reload all services again if I want to connect my laptop again.

I attached the OpnSense General Log that I got just after lost connection and reload all services again.
I'm not sure if it will help.

Thanks

mimugmail,

What logs did you mean?
I've looked at firewall and proxy logs and found nothing that could be blocking the requests.

Do you have a shot that could help?

Thanks

Hi mimugmail,

Unfortunatelly no.
What is strange, is that the GUI access is not affected, only internet access.
I made a ping test that began working fine and suddenly stopped to receive packets.
Looking at the firewall log, I realize that the ICMP requests that were been logged, stopped to been received by Opnsense, so I tried a HTTP/HTTPs requestes and the same results.
When I reload all services everything works again for a short period.

It began to happen after I've updated to 20.1 release.

Thanks

Hi everybody,

I'm facing some problems with my Opnsense.
The new one is thta i'm having to reload all sevices all the time to keep internet access up to the computers on my network.
A computer is accessing internet and suddenly it stops to access. Then I have to go to the Opnsense and reload all services and the internet become accessible agains.
But for a short period and I have to reload services again.

Does anyone know what could be wrong?
I'm working on it for two days and didn't find a solutions.

Thanks

Hi Folks,

I've just installed my Opnsense Server and made all config adjustments to my network.
However, the DHCP is not giving leases to the endpoints over the network.
I revised many times all the configs and did not found what could be wrong.
The funny thing is if I configure the wifi router as DHCP, all endpoints can connect to the network, but when I configure the wifi router as bridge, I can't connect to the network, because the endpoints don't receive IP from Opnsense.
I'm using 20.1 version i386.
Does anyone have an idea of what could be wrong?

Cheers,
Fred