Messages

ok , i finally got this sorted. out of frustration I replaced the nic on my pc on the LAN  , this fixed the issue im not sure how it is possible but at the moment its working correctly. 

It seems traffic from my vm,s can flow through my lagg interface but i cant access the vms via the lagg interface from any device on the lan. i have attached my lagg rules.  maybe this may help with a diagnoses? Thanks

is anyone else able to give some direction on how I can resolve or diagnose this issue ? Thanks

thanks for your help. i have no floating rules the other screenshots you asked for are attached

I have been trying to fix this issue for hours now, my vlan has access to the internet without issue. my lan has access to the internet. i cant ping the vlan gateway and I cant ssh or ping a vm on the vlan from a lan ip. the lan has the the default allow to all rule for ip4 and ip6 . watching the live firewall log with a filter for the vm ip setup, I cant see any log when i try to ssh from the lan to the vlan but when i try from the vlan to a lan device it shows the traffic being blocked. any advice on where to look next to try and fix this issue. Thanks 

Thanks for your help, I will be using VLANs but dont have that setup as yet. If I setup a VLAN for the unifi devices how will the switch get an ip for its VLAN from opnsense ?. I would need to tag both LAGG ports with the VLAN id in the unifi switch before i connect the switch if I understand correctly?.I am using a seperate subnet for the LAGG interface and was hoping when i plugged the switch in it would get an ip then i could ssh into the switch and set the url so that it can be adopted into the unifi controller. I have not enabled DHCP Guarding . 

Just to be clear im not setting up multi wan. thanks again

Hi Im switching my home lab across to opnsense from pfsense , i am setting the new network up seperatelty so that i can move services across as needed. i currently have 2 wan connections which makes the move easier. i havent used LAGG interfaces with pfsense but i have set it up in opnsense which looks all ok maybe its not?, the issue im having is that i have dhcp setup on the LAGG interface  expecting to plug opnsense  into the unifi switch and the switch get an ip which i can then ssh into to switch to set the console address for the switch adoption. The switch dosnt seem to get an ip from opnsense,  at the moment i havnt been able to get this to work if anyone has knowledge on this type of connection that could help out , that would be much appreciated. Thanks