"
Oh nice, thanks for the heads up!
Also: concerning that the patch was committed but the module was the old one O_o
Also: concerning that the patch was committed but the module was the old one O_o
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
20.1 Legacy Series / Re: MiFi 8000 USB connectivity issues
June 17, 2020, 01:46:50 AM
Hmmm... I wonder if that's the issue:
This is mine:
This is the one from https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=245152
Maybe the mismatch in idProduct is an issue?
Here's the full dump:
This is mine:
Code Select
root@OPNsense:~ # usbconfig -d 0.2 dump_device_desc
ugen0.2: <Novatel Wireless MiFi 8000> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x1410
idProduct = 0xb020
bcdDevice = 0x0318
iManufacturer = 0x0001 <Novatel Wireless>
iProduct = 0x0002 <MiFi 8000>
iSerialNumber = 0x0003 <0123456789ABCDEF>
bNumConfigurations = 0x0003
This is the one from https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=245152
Code Select
# usbconfig -d 1.2 dump_device_desc
ugen1.2: <Novatel Wireless MiFi 8000> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (224mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0310
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0009
idVendor = 0x1410
idProduct = 0xb022
bcdDevice = 0x0318
iManufacturer = 0x0001 <Novatel Wireless>
iProduct = 0x0002 <MiFi 8000>
iSerialNumber = 0x0003 <0123456789ABCDEF>
bNumConfigurations = 0x0001Maybe the mismatch in idProduct is an issue?
Here's the full dump:
Code Select
root@OPNsense:~ # usbconfig -d 0.2 dump_all_desc
ugen0.2: <Novatel Wireless MiFi 8000> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x1410
idProduct = 0xb020
bcdDevice = 0x0318
iManufacturer = 0x0001 <Novatel Wireless>
iProduct = 0x0002 <MiFi 8000>
iSerialNumber = 0x0003 <0123456789ABCDEF>
bNumConfigurations = 0x0003
Configuration index 0
bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x0064
bNumInterfaces = 0x0003
bConfigurationValue = 0x0001
iConfiguration = 0x0000 <no string>
bmAttributes = 0x0080
bMaxPower = 0x00fa
Additional Descriptor
bLength = 0x08
bDescriptorType = 0x0b
bDescriptorSubType = 0x00
RAW dump:
0x00 | 0x08, 0x0b, 0x00, 0x02, 0xef, 0x04, 0x01, 0x08
Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0001
bInterfaceClass = 0x00ef <Miscellaneous device>
bInterfaceSubClass = 0x0004
bInterfaceProtocol = 0x0001
iInterface = 0x0006 <RNDIS Communications Control>
Additional Descriptor
bLength = 0x05
bDescriptorType = 0x24
bDescriptorSubType = 0x00
RAW dump:
0x00 | 0x05, 0x24, 0x00, 0x10, 0x01
Additional Descriptor
bLength = 0x05
bDescriptorType = 0x24
bDescriptorSubType = 0x01
RAW dump:
0x00 | 0x05, 0x24, 0x01, 0x00, 0x01
Additional Descriptor
bLength = 0x04
bDescriptorType = 0x24
bDescriptorSubType = 0x02
RAW dump:
0x00 | 0x04, 0x24, 0x02, 0x00
Additional Descriptor
bLength = 0x05
bDescriptorType = 0x24
bDescriptorSubType = 0x06
RAW dump:
0x00 | 0x05, 0x24, 0x06, 0x00, 0x01
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081 <IN>
bmAttributes = 0x0003 <INTERRUPT>
wMaxPacketSize = 0x0008
bInterval = 0x0009
bRefresh = 0x0000
bSynchAddress = 0x0000
Interface 1
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0001
bAlternateSetting = 0x0000
bNumEndpoints = 0x0002
bInterfaceClass = 0x000a <CDC-data>
bInterfaceSubClass = 0x0000
bInterfaceProtocol = 0x0000
iInterface = 0x0007 <RNDIS Ethernet Data>
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x008e <IN>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x000f <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Interface 2
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0002
bAlternateSetting = 0x0000
bNumEndpoints = 0x0001
bInterfaceClass = 0x0003 <HID device>
bInterfaceSubClass = 0x0000
bInterfaceProtocol = 0x0000
iInterface = 0x0009 <HID Interface>
Additional Descriptor
bLength = 0x09
bDescriptorType = 0x21
bDescriptorSubType = 0x01
RAW dump:
0x00 | 0x09, 0x21, 0x01, 0x01, 0x00, 0x01, 0x22, 0x22,
0x08 | 0x00
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0082 <IN>
bmAttributes = 0x0003 <INTERRUPT>
wMaxPacketSize = 0x0008
bInterval = 0x0004
bRefresh = 0x0000
bSynchAddress = 0x0000
Configuration index 1
bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x004b
bNumInterfaces = 0x0002
bConfigurationValue = 0x0002
iConfiguration = 0x0000 <no string>
bmAttributes = 0x0080
bMaxPower = 0x00fa
Additional Descriptor
bLength = 0x08
bDescriptorType = 0x0b
bDescriptorSubType = 0x00
RAW dump:
0x00 | 0x08, 0x0b, 0x00, 0x02, 0x02, 0x02, 0x01, 0x0c
Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0001
bInterfaceClass = 0x0002 <Communication device>
bInterfaceSubClass = 0x0002
bInterfaceProtocol = 0x0001
iInterface = 0x000a <CDC Abstract Control Model (ACM)>
Additional Descriptor
bLength = 0x05
bDescriptorType = 0x24
bDescriptorSubType = 0x00
RAW dump:
0x00 | 0x05, 0x24, 0x00, 0x10, 0x01
Additional Descriptor
bLength = 0x05
bDescriptorType = 0x24
bDescriptorSubType = 0x01
RAW dump:
0x00 | 0x05, 0x24, 0x01, 0x00, 0x01
Additional Descriptor
bLength = 0x04
bDescriptorType = 0x24
bDescriptorSubType = 0x02
RAW dump:
0x00 | 0x04, 0x24, 0x02, 0x02
Additional Descriptor
bLength = 0x05
bDescriptorType = 0x24
bDescriptorSubType = 0x06
RAW dump:
0x00 | 0x05, 0x24, 0x06, 0x00, 0x01
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0082 <IN>
bmAttributes = 0x0003 <INTERRUPT>
wMaxPacketSize = 0x000a
bInterval = 0x0009
bRefresh = 0x0000
bSynchAddress = 0x0000
Interface 1
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0001
bAlternateSetting = 0x0000
bNumEndpoints = 0x0002
bInterfaceClass = 0x000a <CDC-data>
bInterfaceSubClass = 0x0000
bInterfaceProtocol = 0x0000
iInterface = 0x000b <CDC ACM Data>
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081 <IN>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0001 <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Configuration index 2
bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x0020
bNumInterfaces = 0x0001
bConfigurationValue = 0x0003
iConfiguration = 0x0000 <no string>
bmAttributes = 0x0080
bMaxPower = 0x00fa
Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0002
bInterfaceClass = 0x0008 <Mass storage>
bInterfaceSubClass = 0x0006
bInterfaceProtocol = 0x0050
iInterface = 0x0004 <Mass Storage>
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081 <IN>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0001 <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0001
bRefresh = 0x0000
bSynchAddress = 0x0000
#3
20.1 Legacy Series / MiFi 8000 USB connectivity issues
June 12, 2020, 08:07:32 PM
I'm trying to attach a MiFi 8000 LTE hotspot (from calyxinstitute.org) to my fitlet2 (https://fit-iot.com/web/products/fitlet2/) running opnsense and use it as a fallback source of internet.
I am running OPNsense 20.1.7-amd64.
Whenever I connect it, for about 5 seconds I get the "ue0" interface, but then it immediately disappears.
The device itself will ask me if I want charging or charging+tethering. Tethering is the default when I plug it in and it doesn't seem to change.
This is the matching dmesg output:
usbconfig output:
It seems that the code to support it was pulled in with 20.1.7: https://github.com/opnsense/changelog/blob/master/doc/20.1/20.1.7
Specifically this commit: https://github.com/opnsense/src/commit/f3b129a428da2600853c67667ce6229572207076
Anyone got an idea about why it might just disappear?
I am running OPNsense 20.1.7-amd64.
Whenever I connect it, for about 5 seconds I get the "ue0" interface, but then it immediately disappears.
The device itself will ask me if I want charging or charging+tethering. Tethering is the default when I plug it in and it doesn't seem to change.
This is the matching dmesg output:
Quoteugen0.2: <Novatel Wireless MiFi 8000> at usbus0
cdce0 on uhub0
cdce0: <CDC Ethernet Control Model ECM> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 00:15:ff:xx:xx:xx
uhid0 on uhub0
uhid0: <HID Interface> on usbus0
ugen0.2: <Novatel Wireless MiFi 8000> at usbus0 (disconnected)
cdce0: at uhub0, port 10, addr 27 (disconnected)
cdce0: detached
uhid0: at uhub0, port 10, addr 27 (disconnected)
uhid0: detached
usbconfig output:
Quote# usbconfig
ugen0.1: <0x8086 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.2: <Novatel Wireless MiFi 8000> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (224mA)
It seems that the code to support it was pulled in with 20.1.7: https://github.com/opnsense/changelog/blob/master/doc/20.1/20.1.7
Specifically this commit: https://github.com/opnsense/src/commit/f3b129a428da2600853c67667ce6229572207076
Anyone got an idea about why it might just disappear?
Pages1
