Messages

Hi,

after upgrade I lost access to webconfigurator. After disabling fw manually I was able to get in and wanted to add rules to firewall to allow access permanently.

There I found that in "Firewall"->"Rules" when adding new rule I have no ability to select/use lan and wan interfaces. The only options are OpenVPN and IPSec.

Thanks for any help...

have the same issue, webconfigurator rules got removed and lost access

Hi,

I have setup ipsec server for road-wariors....
but if I try to connect (android) device I always get:

Feb 6 18:55:38   charon: 03[NET] received unsupported IKE version 1.0 from *******, sending INVALID_MAJOR_VERSION
Feb 6 18:55:38   charon: 03[NET] sending packet: from*******[500] to *******[500] (36 bytes)
Feb 6 18:55:38   charon: 03[ENC] generating INFORMATIONAL response 0 [ N(INVAL_MAJOR) ]

On pfSense forum I have found the same problem, it was solved with new snapshot....

thnx solved :)

Hi,

when generating new CA I will always get following error:

openssl library returns: error:0E064002:configuration file routines:CONF_load:system lib

Any ideas ?

Thnx

Thanks, the new version - fresh install worked without problems

Hi,

I have interesting problem. Fresh installation of OPNsense in VMWare environment. VM has 2 interfaces, one on public internet, second on private network.

After successful installation I have tried to setup IP for WAN interface.
WAN interface is em0, LAN is em1.

IP setup should be:
IP: 62.168.117.233
Mask: 255.255.255.224 = /27
GW: 62.168.117.225

DHCP disabled, IPv6 disabled.

When IP setup is over I see that the IP was not assigned and machine is not reachable on net.

Any idea ?