Messages

1

21.1 Legacy Series / Re: Updates tab just spins - no output

« on: July 04, 2021, 08:25:55 am »

It finally came back with done.
Then the security check has something small (I guess normal) until the next update

The check for updates, did not work as well.
So probably cache with FF.
thanks for the post

2

21.1 Legacy Series / Re: Updates tab just spins - no output

« on: July 04, 2021, 08:12:15 am »

Same problem. I also use FF under Ubuntu. So I installed Chromium. In the updates I get as far as: checking packages .
It is still printing the dots, so no timeout yet, but it has been 15min
I will let it run for the next hour, will see what happens

***GOT REQUEST TO AUDIT HEALTH***
Currently running OPNsense 21.1.7_1 (amd64/OpenSSL) at Sun Jul  4 07:39:13 CEST 2021
>>> Check installed kernel version
Version 21.1.7 is correct.
>>> Check for missing or altered kernel files
No problems detected.
>>> Check installed base version
Version 21.1.7 is correct.
>>> Check for missing or altered base files
No problems detected.
>>> Check for missing package dependencies
Checking all packages: .......... done
>>> Check for missing or altered package files
Checking all packages: .......... done
>>> Check for core packages consistency
Core package "opnsense" has 67 dependencies to check.
Checking packages: ..................................................

3

20.1 Legacy Series / Re: automatic reconnect

« on: April 02, 2020, 07:26:30 pm »

Yes.
Interfaces -> Wan -> IPv4 is set to DHCP


So there is no other automated way if there is no IP on the WAN interface to retry for a certain amount of time?

4

20.1 Legacy Series / automatic reconnect

« on: April 02, 2020, 04:35:46 pm »

My OPNsense FW is right behind a UPC cable modem.

There were several issues with UPC in our region in the last month and the UPC modem is rebooting twice a week
After that, OPNsense with not automatically reconnect the WAN interface.

Is there a auto retry for x hours feature? For now I reboot the FW and everything works fine thereafter.
Or is there maybe a setting I have not set yet?