Messages

1

20.7 Legacy Series / Re: APU power fails do corrupt SD Cards and MSATA

« on: November 01, 2020, 05:41:05 pm »

I'm running an APU4D4 with 20.7.3 and MSATA.

It ooted up correytly after Power fail.

I can confirm, that it must be an UFS Failure. This can happen, i.e. if the system is writing on the Device in the moment of Power Failure. Normally the System should repiar the error with fsck by booting.

Robert

2

20.1 Legacy Series / custom DynDNS TTL?

« on: July 07, 2020, 08:59:48 pm »

Hello,

I've upgraded to 20.1.8. After a power failure, I booted the machine and checked that everything is running. I went to the Dynamic DNC Page. the settings seems ok but when I saved the setting a red warning popped up saying.

"The TTL value needs to be a valid integer number."

The interesting Thing about this error message is the fact, that there is no field to configure the TTL. See the attached screenshot (It is in German but I think you will see that there is no TTL field.

3

20.1 Legacy Series / Graph is going mad

« on: March 21, 2020, 06:49:48 pm »

Hello Developer,

I have the 20.1.3 Version installed and today I had the first time a fault in the Graph with bandwidth. Please see the attached image.

I was doing a digikam-Database maintenance and so there was a lot of traffic from my DMZ to the LAN. About 240 to 300 Mbit.
There were no error on the transfer but only the display erorr.

I think this is helpfull.

The the spec of my firewall:

Code: [Select]

User-Agent Mozilla/5.0 (X11; FreeBSD amd64; rv:74.0) Gecko/20100101 Firefox/74.0
FreeBSD 11.2-RELEASE-p17-HBSD  b0b3393e380(stable/20.1) amd64
OPNsense 20.1.3 17a08bc1b
Plugins os-dyndns-1.20 os-wol-2.2_1
Time Sat, 21 Mar 2020 17:56:20 +0100
LibreSSL 3.0.2
PHP 7.2.28
And the dmesg boot

Code: [Select]

Copyright (c) 2013-2018 The HardenedBSD Project.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p17-HBSD  b0b3393e380(stable/20.1) amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
HardenedBSD: initialize and check features (__HardenedBSD_version 1100056 __FreeBSD_version 1102000).
CPU: AMD GX-412TC SOC                                (998.15-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x730f01  Family=0x16  Model=0x30  Stepping=1
  Features=0x178bfbff
  Features2=0x3ed8220b
  AMD Features=0x2e500800
  AMD Features2=0x1d4037ff
  Structured Extended Features=0x8
  XSAVE Features=0x1
  SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4081741824 (3892 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic1: Changing APIC ID to 5
ioapic0  irqs 0-23 on motherboard
ioapic1  irqs 24-55 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 998147024 Hz quality 1000
wlan: mac acl policy registered
random: entropy device external interface
000.000016 [4213] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8114aef0, 0) error 19
kbd0 at kbdmux0
nexus0
vtvga0:  on motherboard
cryptosoft0:  on motherboard
acpi0:  on motherboard
acpi0: Power Button (fixed)
cpu0:  on acpi0
cpu1:  on acpi0
cpu2:  on acpi0
cpu3:  on acpi0
atrtc0:  port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0:  port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
hpet0:  iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
acpi_button0:  on acpi0
pcib0:  port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0:  on pcib0
pci0:  at device 0.2 (no driver attached)
pcib1:  irq 24 at device 2.1 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1:  on pcib1
igb0:  mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 24 at device 0.0 on pci1
igb0: Using MSIX interrupts with 3 vectors
igb0: Ethernet address: 00:0d:b9:55:bb:f4
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2:  irq 25 at device 2.2 on pci0
pci2:  on pcib2
igb1:  port 0x2000-0x201f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 28 at device 0.0 on pci2
igb1: Using MSIX interrupts with 3 vectors
igb1: Ethernet address: 00:0d:b9:55:bb:f5
igb1: Bound queue 0 to cpu 2
igb1: Bound queue 1 to cpu 3
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3:  irq 26 at device 2.3 on pci0
pci3:  on pcib3
igb2:  port 0x3000-0x301f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 32 at device 0.0 on pci3
igb2: Using MSIX interrupts with 3 vectors
igb2: Ethernet address: 00:0d:b9:55:bb:f6
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4:  irq 27 at device 2.4 on pci0
pci4:  on pcib4
igb3:  port 0x4000-0x401f mem 0xf7c00000-0xf7c1ffff,0xf7c20000-0xf7c23fff irq 36 at device 0.0 on pci4
igb3: Using MSIX interrupts with 3 vectors
igb3: Ethernet address: 00:0d:b9:55:bb:f7
igb3: Bound queue 0 to cpu 2
igb3: Bound queue 1 to cpu 3
igb3: netmap queues/slots: TX 2/1024, RX 2/1024
pci0:  at device 8.0 (no driver attached)
xhci0:  mem 0xf7f22000-0xf7f23fff irq 18 at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0:  port 0x5010-0x5017,0x5020-0x5023,0x5018-0x501f,0x5024-0x5027,0x5000-0x500f mem 0xf7f25000-0xf7f253ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0:  at channel 0 on ahci0
ahcich1:  at channel 1 on ahci0
ehci0:  mem 0xf7f26000-0xf7f260ff irq 18 at device 19.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0:  at device 20.3 on pci0
isa0:  on isab0
sdhci_pci0:  mem 0xf7f27000-0xf7f270ff at device 20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0:  at iomem 0xee800-0xeffff on isa0
ppc0: cannot reserve I/O port range
hwpstate0:  on cpu0
Timecounters tick every 1.000 msec
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen1.1:  at usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1:  on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0:  ACS-2 ATA SATA 3.x device
ada0: Serial Number F458770586
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/rootfs [rw,noatime]...
random: unblocking device.
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2:  at usbus1
uhub2 on uhub1
uhub2:  on usbus1
uhub2: 4 ports with 4 removable, self powered
Kind Regards

R.Friemer