Messages

I get the following when trying to update.  I got more details from CLI than GUI.  I've rebooted and tried different sources.

Proceed with this action? [21.1/y/N]: y

Updating OPNsense repository catalogue...
pkg-static: http://mirror.sfo12.us.leaseweb.net/opnsense/FreeBSD:12:amd64/20.7/latest/meta.txz: No address record
repository OPNsense has no meta file, using default settings
pkg-static: http://mirror.sfo12.us.leaseweb.net/opnsense/FreeBSD:12:amd64/20.7/latest/packagesite.txz: No address record
Unable to update repository OPNsense
Error updating repositories!
A firmware update is currently in progress.

I do get assigned (1) IPv4 address and (1) IPv6 address, I wonder if i separated out that way if it would work?

That would be lovely if I could have multiple public IP's, but COX doesn't allow that.

Ok, I have spent 2-3 days reading every post I can find on how to setup OPNsense for multiple XBOX.  I think I am close, meaning I show both XBOX's with open NAT, but Rainbow 6 Seige will only connect the first person.  This is what I've tried so far:

https://www.tweaking4all.com/network-internet/pfsense-strict-nat-xbox-one/

There is a deny 3074 192.168.70.0/24 0-65535 at the bottom I have in there too.


Thoughts?

I created a file... no luck

I have no /var/etc/miniupnpd.conf   

Does anyone have a generic one I can create?  File permissions? 

For giggles, I tried reinstalling miniupnpd.  No change.

***GOT REQUEST TO REINSTALL: miniupnpd***
Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.

Number of packages to be fetched: 1
No packages are required to be fetched.
Integrity check was successful.
miniupnpd-2.1.20190210,1: already unlocked
Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The following 1 package(s) will be affected (of 0 checked):

Installed packages to be REINSTALLED:
   miniupnpd-2.1.20190210,1

Number of packages to be reinstalled: 1
[1/1] Reinstalling miniupnpd-2.1.20190210,1...
[1/1] Extracting miniupnpd-2.1.20190210,1: ....... done
Checking integrity... done (0 conflicting)
Nothing to do.
***DONE***

Tried, still caused reboot.

Have you tried the following combination to see if OPNsense doesn't reboot?

Check Allow UPnP Port Mapping, uncheck Allow NAT-PMP Port Mapping, check enable and then save.

root@OPNsense:~ # killall miniupnpd
No matching processes were found

root@OPNsense:~ # /usr/local/sbin/miniupnpd -d -f /var/etc/miniupnpd.conf -P /var/run/miniupnpd.pid
Error reading configuration file /var/etc/miniupnpd.conf

1.  Yes, it does show installed.  I have uninstalled, rebooted and reinstalled.
2.  Please see attached screen shots.  You will see that "enable" is grayed out, not orange
3.  See screen shots of audits... no issues

https://www.dropbox.com/s/eho8qsxp5gtoqr0/1.png?dl=0
https://www.dropbox.com/s/urn2tr5gud4i6pm/2.png?dl=0
https://www.dropbox.com/s/ppmdjupclapkquv/3.png?dl=0
https://www.dropbox.com/s/fb87baopjxnx3b4/4.png?dl=0
https://www.dropbox.com/s/l67jnwdjflznh9c/5.png?dl=0
https://www.dropbox.com/s/wjsi8aypbz4rsco/6.png?dl=0

Also, the enable i/! next to enable is grayed out.

I have (2) xbox's.  When I try to enable the UPNP service, it reboots OPNSense.  I have uninstalled/deleted the service, I rebooted, reinstalled, I rebooted. tried to enable UPNP... it reboots itself.   Comes back up and wants to send an crash report.

I have tried other combinations, but the outcome is the same.