1
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Tutorials and FAQs / ftp don't put files after connection
« on: September 16, 2019, 03:29:42 pm »
Hello.
I have a problem with opnsense and ftp.
I need to send files to an external server via ftp.
Initially the connection is there, the server accepts the login, but I can't send the files (put).
Is it a firewall problem?
I have a problem with opnsense and ftp.
I need to send files to an external server via ftp.
Initially the connection is there, the server accepts the login, but I can't send the files (put).
Is it a firewall problem?
3
Tutorials and FAQs / Re: Captive Portal after update?
« on: September 13, 2019, 01:57:29 pm »
fantastico!!
Funziona!!!
Grazie
Funziona!!!
Grazie
4
Tutorials and FAQs / Captive Portal after update?
« on: September 12, 2019, 05:11:10 pm »
Captive portal does not connect devices after upgrade.
It enter the access area, login me, but don't browse.
This morning it worked quietly, afternoon I made the update and now it's not going anymore.
Any idea? thanks
here the log:
Sep 12 17:07:05 captiveportal: starting captiveportal background process
Sep 12 17:05:06 captiveportal[49701]: AUTH xxxx (10.10.20.10) zone 0
It enter the access area, login me, but don't browse.
This morning it worked quietly, afternoon I made the update and now it's not going anymore.
Any idea? thanks
here the log:
Sep 12 17:07:05 captiveportal: starting captiveportal background process
Sep 12 17:05:06 captiveportal[49701]: AUTH xxxx (10.10.20.10) zone 0
5
Tutorials and FAQs / Re: i can't connect to internet
« on: September 05, 2019, 02:33:58 pm »
thanks
6
Tutorials and FAQs / Re: i can't connect to internet
« on: September 05, 2019, 01:40:00 pm »
i'm sorry. was the cable 
now works fine
thanks to all
now works fine
thanks to all
7
Tutorials and FAQs / Re: i can't connect to internet
« on: September 05, 2019, 08:57:36 am »
Good morning. In System-Gateway-Single I have what you see in the attachment.
Obviously from interfaces- ping if 8.8.8.8.8 gives me "host down".
The firewall rules are the original ones.
I don't have dhcp in endian. I have DHCP windows server.
Yesterday I turned off endian, given the same endian to opnsense ip address and switched to opnsense ONLY but I had the same problem.
I can't get the gw to work (and go out on the internet).
Some time ago I installed pfsense and it worked. I configured opnsense based on that configuration, but nothing.
PS: the image is cut but i read
GW_WAN
gw isp 0.0 ms 0.0 ms 100.0 % Offline
Obviously from interfaces- ping if 8.8.8.8.8 gives me "host down".
The firewall rules are the original ones.
I don't have dhcp in endian. I have DHCP windows server.
Yesterday I turned off endian, given the same endian to opnsense ip address and switched to opnsense ONLY but I had the same problem.
I can't get the gw to work (and go out on the internet).
Some time ago I installed pfsense and it worked. I configured opnsense based on that configuration, but nothing.
PS: the image is cut but i read
GW_WAN
gw isp 0.0 ms 0.0 ms 100.0 % Offline
8
Tutorials and FAQs / Re: i can't connect to internet
« on: September 04, 2019, 02:38:33 pm »
Hello. I have attached the layout of my network. as I said there is already a first working fw. the second fw OPNSENSE does not ping even from dashboard (so I don't think packages come out) and the gateway (in dashboard) is always offline.
If I at OPNSENSE do as gw the fw1 works but not as I would like.
If I at OPNSENSE do as gw the fw1 works but not as I would like.
9
Tutorials and FAQs / Re: i can't connect to internet
« on: September 03, 2019, 04:34:40 pm »
Hi Bart, thanks for the reply. If I set gw the gw of the ping router (from opnsense) it DOES NOT go.
If as gw I set the first firewall (and therefore works on the LAN) everything works.
in WAN I set public ip / subnet and upstream the ISP gw.
But strangely it doesn't work.
I have the impression that something is missing ...
If as gw I set the first firewall (and therefore works on the LAN) everything works.
in WAN I set public ip / subnet and upstream the ISP gw.
But strangely it doesn't work.
I have the impression that something is missing ...
10
Tutorials and FAQs / i can't connect to internet
« on: September 03, 2019, 02:47:39 pm »
Hi, first of all I introduce myself and greet everyone here on the forum.
Today, for the first time I installed opnsense.
I ask you for help right away because I can't use opnsense to "exit" from the internet.
Given that I have another endian firewall that serves other purposes, opnsense serves me for captive portal and http proxy.
long ago I used pfsense and having saved the configuration file I reported the same parameters on opnsense.
network (ISP) --- opnsense fxp0 (static) ---- internal lan (static)
if to the configuration I give as gw the fastweb gw (as in the first firewall) does not even push from firewall towards 8.8.8.8; if instead I use the first firewall as gw everything works !! I have been shaking my head for three days.
What am I doing wrong?
thank you in advance.
Today, for the first time I installed opnsense.
I ask you for help right away because I can't use opnsense to "exit" from the internet.
Given that I have another endian firewall that serves other purposes, opnsense serves me for captive portal and http proxy.
long ago I used pfsense and having saved the configuration file I reported the same parameters on opnsense.
network (ISP) --- opnsense fxp0 (static) ---- internal lan (static)
if to the configuration I give as gw the fastweb gw (as in the first firewall) does not even push from firewall towards 8.8.8.8; if instead I use the first firewall as gw everything works !! I have been shaking my head for three days.
What am I doing wrong?
thank you in advance.
11
Italian - Italiano / GW non "esce" in internet
« on: September 03, 2019, 02:45:54 pm »
Ciao anzitutto mi presento e saluto tutti qui sul forum.
Oggi, per la prima volta ho installato opnsense.
Vi chiedo subito un aiuto in quanto nno riesco ad utilizzare opnsense per "uscire" dalla rete.
Premesso ho un altro firewall endian che serve per altri scopi, opnsense mi serve per captive portal e http proxy.
tempo fa ho utilizzato pfsense e avendo salvato il file di configurazione ho riportato gli stessi parametri su opnsense.
rete(ISP) --- opnsense fxp0 (statico) ---- lan interna (statico)
se alla configurazione do come gw il gw di fastweb (come nel primo firewall) non pinga nemmeno da firewall verso 8.8.8.8; se invece come gw utilizzo il primo firewall tutto funziona!! Sono tre gg che sbatto la testa.
Cosa sbaglio?
grazie anticipatamente.
Oggi, per la prima volta ho installato opnsense.
Vi chiedo subito un aiuto in quanto nno riesco ad utilizzare opnsense per "uscire" dalla rete.
Premesso ho un altro firewall endian che serve per altri scopi, opnsense mi serve per captive portal e http proxy.
tempo fa ho utilizzato pfsense e avendo salvato il file di configurazione ho riportato gli stessi parametri su opnsense.
rete(ISP) --- opnsense fxp0 (statico) ---- lan interna (statico)
se alla configurazione do come gw il gw di fastweb (come nel primo firewall) non pinga nemmeno da firewall verso 8.8.8.8; se invece come gw utilizzo il primo firewall tutto funziona!! Sono tre gg che sbatto la testa.
Cosa sbaglio?
grazie anticipatamente.
Pages: [1]