Messages

1

19.1 Legacy Series / Re: Port forwarding through VPN

« on: July 10, 2019, 12:22:03 pm »

At the end I solved using OPNsense 18.1.

In fact while in OPNsense 19.1 port forwarding throught VPN didn't work, in pfSense 2.4.4 I had issue with port forwarding throught WAN.

2

19.1 Legacy Series / Re: Port forwarding through VPN

« on: July 06, 2019, 03:00:29 pm »

I just configured pfSense 2.4.4-RELEASE-p3 (amd64) with these same rules and port-forwarding throught VPN is working: green light from AirVPN site and yougetsignal.com.
I really don't understand where is the problem with OPNsense.

3

19.1 Legacy Series / Re: no access to the webGUI from outside the opnsense

« on: July 06, 2019, 02:21:56 pm »

Sorry I thought that for "outside world (management network)" you meant that you are in a double NAT configuration with OPNsense behind another router.

4

19.1 Legacy Series / Re: no access to the webGUI from outside the opnsense

« on: July 06, 2019, 12:12:13 pm »

Firewall: Rules: WAN

Proto           Source  Port   Destination    Port                 Gateway   Schedule   Description    
IPv4 TCP/UDP   *      *       WAN address    443 (HTTPS)   *                      Allow WAN access

IMPORTANT --> disable reply-to: checked

5

19.1 Legacy Series / Re: Port forwarding through VPN

« on: July 06, 2019, 10:32:25 am »

Updated to OPNsense 19.1.10. Port Forwarding trought VPN stil not working for me.

6

Tutorials and FAQs / Re: HOWTO - Routing Traffic over Private VPN

« on: July 06, 2019, 10:29:41 am »

Someone had any lucky in forwarding a port trought the VPN tunnel?
If yes can you please explain how you configured OPNsense. Thanks

7

19.1 Legacy Series / Re: Port forwarding through VPN

« on: July 03, 2019, 01:27:34 pm »

Hi,

I have the same issue in forwanding a specific port trought the VPN.

I'm using OPNsense 19.1.9-amd64 FreeBSD 11.2-RELEASE-p10-HBSD OpenSSL 1.0.2s 28 May 2019

My VPN provider is AirVPN. I opened the port on the AirVPN web site then tried to configure OPNsense in this way:

Firewall-NAT-Port Forward


Firewall-NAT-Outbound


Firewall-Rules-AirVPN1

(this rule is autogenerated, but I tried also the same rule manually with "disable reply-to" checked)

Firewall-Rules-LAN


If I try to use AirVPN tool to check open port (on AirVPN website) it says the port is closed.
If I use this site https://www.yougetsignal.com/tools/open-ports/ it says the port is closed.

I don't find anywhere a guide to port forwarding over VPN with OPNsense.
I hope someone can help to understand where is the problem and if there is an OPNsense bug somewhere.
Thanks