Messages

Установил OPNSense 19.1 и теперь хочу подружить его с модемом Huawei e8372h.
Установил usb_modeswitch, но автоматического переключения не происходит.

Code Select Expand

root@OPNsense:~ # usbconfig
ugen0.1: <SiS OHCI root HUB> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen1.1: <SiS OHCI root HUB> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen2.1: <SiS EHCI root HUB> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen2.2: <vendor 0x12d1 HUAWEIMOBILE> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA)

Code Select Expand

root@OPNsense:~ # usbconfig -d 2.2 dump_device_desc
ugen2.2: <vendor 0x12d1 HUAWEIMOBILE> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA)

bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0210
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x12d1
idProduct = 0x1f01
bcdDevice = 0x0102
iManufacturer = 0x0001 <HUAWEI_MOBILE>
iProduct = 0x0002 <HUAWEI_MOBILE>
iSerialNumber = 0x0003 <0123456789ABCDEF>
bNumConfigurations = 0x0001

Ошибки во второй половине лога

Code Select Expand

root@OPNsense:~ # dmesg
Copyright (c) 2013-2018 The HardenedBSD Project.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p8-HBSD 31af16db12b(stable/19.1) i386
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
HardenedBSD: initialize and check features (__HardenedBSD_version 1100056 __FreeBSD_version 1102000).
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.05-MHz 686-class CPU)
Origin="GenuineIntel" Id=0xf33 Family=0xf Model=0x3 Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SS E,SSE2,SS,HTT,TM,PBE>
Features2=0x41d<SSE3,DTES64,MON,DS_CPL,CNXT-ID>
TSC: P-state invariant
real memory = 805306368 (768 MB)
avail memory = 724545536 (690 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <ASUS P4SP-MX >
ioapic0 <Version 8.0> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1197026833 Hz quality 1000
wlan: mac acl policy registered
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xc11657e0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ASUS P4SP-MX> on motherboard
acpi0: Overriding SCI from IRQ 9 to IRQ 20
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 651 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd800-0xd87f mem 0xf0000000-0xf7ffffff,0xe7800000-0xe781ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa400-0xa40f irq 16 at device 2.5 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcm0: <SiS 7012> port 0x9400-0x94ff,0x9000-0x907f irq 18 at device 2.7 on pci0
pcm0: <Analog Devices AD1888 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xe7000000-0xe7000fff irq 20 at device 3.0 on pci0
usbus0 on ohci0
ohci1: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 21 at device 3.1 on pci0
usbus1 on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe6000000-0xe6000fff irq 23 at device 3.3 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
sis0: <SiS 900 10/100BaseTX> port 0x8800-0x88ff mem 0xe5800000-0xe5800fff irq 19 at device 4.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:11:2f:4b:92:35
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <SiS OHCI root HUB> at usbus0
uhub0: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <SiS OHCI root HUB> at usbus1
uhub1: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <SiS EHCI root HUB> at usbus2
uhub2: <SiS EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG SP0802N TK200-04> ATA-7 device
uhub0: 3 ports with 3 removable, self powered
ada0: Serial Number S00JJ50X610431
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 76351MB (156368016 512 byte sectors)
uhub1: 3 ports with 3 removable, self powered
Trying to mount root from ufs:/dev/ufs/OPNsense [rw,noatime]...
random: unblocking device.
uhub2: 6 ports with 6 removable, self powered
ugen2.2: <vendor 0x12d1 HUAWEIMOBILE> at usbus2
umass0 on uhub2
umass0: <Mass Storage> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:2:0: Attached to scbus2
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device
cd0: Serial Number 0123456789ABCDEF
cd0: 40.000MB/s transfers
cd0: 8MB (4096 2048 byte sectors)
cd0: quirks=0x10<10_BYTE_ONLY>
da0 at umass-sim0 bus 0 scbus2 target 0 lun 1
da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device
da0: Serial Number 0123456789ABCDEF
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f fe 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xffe
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f c1 00 00 04 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfc1
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f fe 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xffe
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f fe 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xffe
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f c1 00 00 04 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfc1
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f fe 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xffe
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0f ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xfff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
sis0: link state changed to UP
aesni0: No AESNI support.
pflog0: promiscuous mode enabled
sis0: link state changed to DOWN
sis0: link state changed to UP