Messages

my mistake I did select to apply associated rule while saving the NAT port forward.

Thanks all of you for your time..

Yes I do find but ports 443 remains closed.

Its working now my mistake I forget filter rule associated.

Here are the screen Shorts

I did enter each ip address in virtual IP

Search
IP Alias       
Address
VHID
Interface  WAN
Type
Description
Commands
   xx.xx.xx.65/29       WAN   IP Alias   Firewall    
   xx.xx.xx.66/29       WAN   IP Alias   Webserver    
   xx.xx.xx.67/29       WAN   IP Alias   Spare    
   xx.xx.xx.68/29       WAN   IP Alias   Spare 2    
   xx.xx.xx.69/29       WAN   IP Alias   Spare 3    

I can access port 80 now but not 443 from out side, though same rule copied and just changed the port to 443.

WAN  TCP    *   *   WAN address   80 (HTTP)    192.168.0.18   80 (HTTP)           WEBSERVER      
WAN     TCP  *   *   WAN address     443 (HTTPS)    192.168.0.18   443 (HTTPS)   WEBSERVER

As mentioned, sniff the traffic on WAN, while you try to access the IP and you will instantly know, if it even works on the outside and can go further.

Thx a lot but How to sniff the wan traffic?

Hi Patrick, Thx for reply. But I don't know how to show virtual IP configuration and your port forwarding rules. I can take snaps but cant find another way to get it. the rules were auto generated by NAT

thx for reply,
I parked the IP /29 in Virtual IP and tried to port forward ports 80/443 to an internal server but when checking the ports these ports are still closed.

I tried to configure virtual ip /29 on opnsense 2.7 
But only wan ip seem to work all othe ips are nor functioning.
I want to assing one ip to a webserver with port forward to lan ip port 80/443 but not successful.
Any body can lead me towards right steps..
Thx

I need to add a remote user to access my server from home.

Openvpn is ruining between two offices. But need to connect a user from home to use that network

Hi everyone,
I am new user and and some silly questions.
I am running two firewall on 2 different sites opnsense 19.1.1 running
these are connected with each other on static ip
Now I need to add a remote user. what should i do.