Messages

1

Tutorials and FAQs / Re: HowTo - Let's encrypt with HaProxy with 19.1.4

« on: April 27, 2021, 11:45:41 pm »

Dear akhiltoor, thanks for this suggestion - it makes sense to revise my HowTo and add some hardcopies.
In the next month I'll switch to new hardware and V 21.1.
Then I'll rewrite the HowTo ...

I'd love to see an updated version. I'd be happy to help test things out too.

Thanks for the writeup!

2

Development and Code Review / Re: Wireguard in opnsense

« on: September 03, 2018, 02:38:22 pm »

I am indeed that guy.

Getting the configd service to work seems to have fixed the WireGuard issue. I am getting keys generated just fine now.

3

18.7 Legacy Series / Re: configd failure to start

« on: September 03, 2018, 02:11:07 pm »

Here is the output of clog on configd.log:

root@bifrost:/home/nfugal # clog /var/log/configd.log
Segmentation fault (core dumped)


If I check the file with nano or vi, it appears empty.  ls also reports the file as 0 bytes:

root@bifrost:/home/nfugal # ls -alh /var/log/
total 133272
drwxr-xr-x   9 root        wheel        1.5K Sep  3 05:36 .
drwxr-xr-x  32 root        wheel        512B Aug 23 16:43 ..
-rw-------   1 root        wheel          0B Sep  3 04:32 configd.log

4

Development and Code Review / Re: Wireguard in opnsense

« on: September 03, 2018, 02:03:47 pm »

I've tried delete and recreate several times with no success.

Are there any logs or anything that might help?

5

18.7 Legacy Series / Re: configd failure to start

« on: September 03, 2018, 01:46:19 pm »

Some poking around with a coworker points to a permissions issue.

The permissions were

-rwx------  1 root  wheel   6.6K Aug 29 20:51 /usr/local/opnsense/service/configd.py

After adding permissions for group as well the service can start.

Not sure how/why the permissions would have changed.

6

18.7 Legacy Series / Re: configd failure to start

« on: September 03, 2018, 12:59:18 pm »

I just noticed that that log file doesn't have anything very recent in it.

I tried clearing it to see if the wonkiness at the end was stopping it from updating, and it has stayed blank thus far.

7

Development and Code Review / Re: Wireguard in opnsense

« on: September 03, 2018, 12:52:57 pm »

I'm trying to test out WireGuard too.

I can't seem to get my setup to generate the keys. After saving I still get the results in the attached screenshot.

Any ideas what I'm missing?

8

18.7 Legacy Series / Re: configd failure to start

« on: September 03, 2018, 12:25:02 pm »

Here you go. https://drive.google.com/open?id=1suzyvQQZWc47TOVBfbut2uw-5zdZ0ds-

I'm not sure what is going on with the end of the file.

I see that there are a lot of messages regarding NUT in here. I'll try disabling that to see if it makes a difference.

At the very least it should help the log be easier to parse.

9

18.7 Legacy Series / configd failure to start

« on: August 30, 2018, 05:12:57 am »

I've poked around and not found anyone with the same problem.

If the answer is already here, please let me know.

I am running version 18.7.1_3 (freshly installed, not an upgrade). I can't get configd to start. I get the following error message:

nfugal@bifrost:~ % service configd status
/usr/local/etc/rc.d/configd: WARNING: cannot read shebang line from /usr/local/opnsense/service/configd.py
configd is not running.

Starting via the WebUI doesn't work either.

I'm happy to post logs or share whatever other info is helpful.

Thanks!