OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Profile of Mastah »
  • Show Posts »
  • Messages
  • Profile Info
    • Summary
    • Show Stats
    • Show Posts...
      • Messages
      • Topics
      • Attachments

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

  • Messages
  • Topics
  • Attachments

Messages - Mastah

Pages: [1] 2
1
Hardware and Performance / Re: Unable to boost higher than 3.8Ghz on zen3 5800X
« on: March 28, 2024, 12:35:32 am »
Been testing Debian 12 on the exact same hardware today (dual booting next to opnsense).

CPU load is 2-3 times less, thread are spread on multiples cores, CPU boost is maxed, packet loss is 0, and routing work damn great.

I max out a symmetrical 10Gbe, which I was not able to do prior to that.

Up to you to draw the conclusion. Linux is my new router.

2
Hardware and Performance / Re: Unable to boost higher than 3.8Ghz on zen3 5800X
« on: March 27, 2024, 12:41:14 am »
Quote from: Seimus on March 26, 2024, 01:56:36 am
Also did you set your PowerD settings in OPN to HiAdaptive at least?

Yes I did, no it doesn't work. Yes the ppl on discord are actual contributor to the source code of freebsd.
And no, the kernel is not able so it would seem, to handle properly AMD cpu above zen2. And even zen2 are not supported correctly. That a 5-6years old tech at that point.

You are speaking of custom OS that have forked for more than 10-15years from BSD. It's like comparing Apple OS to unix/linux.
I'm wondering why some major open source (and not open source) project are getting the f out of bsd to move to linux though.

3
Hardware and Performance / Re: Unable to boost higher than 3.8Ghz on zen3 5800X
« on: March 25, 2024, 06:23:39 pm »
After speaking with people at freebsd discord I've more than the feeling that freebsd is at best dying, at worst already dead and can't keep with modern tech and hardware.

The more I think about it and the more I believe that freebsd is not the way to go, and that opnsense should switch to something with more support, more perf and more hardware support.

4
Hardware and Performance / Re: Unable to boost higher than 3.8Ghz on zen3 5800X
« on: March 24, 2024, 04:23:36 pm »
powerd -v give the following during high usage


Code: [Select]
changing clock speed from 2200 MHz to 3800 MHz
load  70%, current freq 3800 MHz ( 0), wanted freq 6460 MHz
load  73%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  63%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  64%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  72%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  63%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  66%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  75%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  72%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  66%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  73%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  64%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  67%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  88%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  69%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  72%, current freq 3800 MHz ( 0), wanted freq 7600 MHz
load  87%, current freq 3800 MHz ( 0), wanted freq 7600 MHz

So definitly wants to get boost but still lock at 3800





Quote
sysctl dev.cpu
Code: [Select]
dev.cpu.15.temperature: 48.5C
dev.cpu.15.cx_method: C1/hlt C2/io
dev.cpu.15.cx_usage_counters: 4862 458019
dev.cpu.15.cx_usage: 1.05% 98.94% last 66101us
dev.cpu.15.cx_lowest: C8
dev.cpu.15.cx_supported: C1/1/1 C2/2/18
dev.cpu.15.%parent: acpi0
dev.cpu.15.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.15.%location: handle=\_PR_.C00F
dev.cpu.15.%driver: cpu
dev.cpu.15.%desc: ACPI CPU
dev.cpu.14.temperature: 48.5C
dev.cpu.14.cx_method: C1/hlt C2/io
dev.cpu.14.cx_usage_counters: 5216 448305
dev.cpu.14.cx_usage: 1.15% 98.84% last 93319us
dev.cpu.14.cx_lowest: C8
dev.cpu.14.cx_supported: C1/1/1 C2/2/18
dev.cpu.14.%parent: acpi0
dev.cpu.14.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.14.%location: handle=\_PR_.C00E
dev.cpu.14.%driver: cpu
dev.cpu.14.%desc: ACPI CPU
dev.cpu.13.temperature: 48.5C
dev.cpu.13.cx_method: C1/hlt C2/io
dev.cpu.13.cx_usage_counters: 4980 438561
dev.cpu.13.cx_usage: 1.12% 98.87% last 108163us
dev.cpu.13.cx_lowest: C8
dev.cpu.13.cx_supported: C1/1/1 C2/2/18
dev.cpu.13.%parent: acpi0
dev.cpu.13.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.13.%location: handle=\_PR_.C00D
dev.cpu.13.%driver: cpu
dev.cpu.13.%desc: ACPI CPU
dev.cpu.12.temperature: 48.5C
dev.cpu.12.cx_method: C1/hlt C2/io
dev.cpu.12.cx_usage_counters: 5005 434655
dev.cpu.12.cx_usage: 1.13% 98.86% last 130722us
dev.cpu.12.cx_lowest: C8
dev.cpu.12.cx_supported: C1/1/1 C2/2/18
dev.cpu.12.%parent: acpi0
dev.cpu.12.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.12.%location: handle=\_PR_.C00C
dev.cpu.12.%driver: cpu
dev.cpu.12.%desc: ACPI CPU
dev.cpu.11.temperature: 48.5C
dev.cpu.11.cx_method: C1/hlt C2/io
dev.cpu.11.cx_usage_counters: 5089 437012
dev.cpu.11.cx_usage: 1.15% 98.84% last 242396us
dev.cpu.11.cx_lowest: C8
dev.cpu.11.cx_supported: C1/1/1 C2/2/18
dev.cpu.11.%parent: acpi0
dev.cpu.11.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.11.%location: handle=\_PR_.C00B
dev.cpu.11.%driver: cpu
dev.cpu.11.%desc: ACPI CPU
dev.cpu.10.temperature: 48.5C
dev.cpu.10.cx_method: C1/hlt C2/io
dev.cpu.10.cx_usage_counters: 5108 439730
dev.cpu.10.cx_usage: 1.14% 98.85% last 310027us
dev.cpu.10.cx_lowest: C8
dev.cpu.10.cx_supported: C1/1/1 C2/2/18
dev.cpu.10.%parent: acpi0
dev.cpu.10.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.10.%location: handle=\_PR_.C00A
dev.cpu.10.%driver: cpu
dev.cpu.10.%desc: ACPI CPU
dev.cpu.9.temperature: 48.5C
dev.cpu.9.cx_method: C1/hlt C2/io
dev.cpu.9.cx_usage_counters: 4608 470169
dev.cpu.9.cx_usage: 0.97% 99.02% last 39290us
dev.cpu.9.cx_lowest: C8
dev.cpu.9.cx_supported: C1/1/1 C2/2/18
dev.cpu.9.%parent: acpi0
dev.cpu.9.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.9.%location: handle=\_PR_.C009
dev.cpu.9.%driver: cpu
dev.cpu.9.%desc: ACPI CPU
dev.cpu.8.temperature: 48.5C
dev.cpu.8.cx_method: C1/hlt C2/io
dev.cpu.8.cx_usage_counters: 4989 433776
dev.cpu.8.cx_usage: 1.13% 98.86% last 39333us
dev.cpu.8.cx_lowest: C8
dev.cpu.8.cx_supported: C1/1/1 C2/2/18
dev.cpu.8.%parent: acpi0
dev.cpu.8.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.8.%location: handle=\_PR_.C008
dev.cpu.8.%driver: cpu
dev.cpu.8.%desc: ACPI CPU
dev.cpu.7.temperature: 48.5C
dev.cpu.7.cx_method: C1/hlt C2/io
dev.cpu.7.cx_usage_counters: 4671 492909
dev.cpu.7.cx_usage: 0.93% 99.06% last 74302us
dev.cpu.7.cx_lowest: C8
dev.cpu.7.cx_supported: C1/1/1 C2/2/18
dev.cpu.7.%parent: acpi0
dev.cpu.7.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.7.%location: handle=\_PR_.C007
dev.cpu.7.%driver: cpu
dev.cpu.7.%desc: ACPI CPU
dev.cpu.6.temperature: 48.5C
dev.cpu.6.cx_method: C1/hlt C2/io
dev.cpu.6.cx_usage_counters: 5617 791347
dev.cpu.6.cx_usage: 0.70% 99.29% last 46544us
dev.cpu.6.cx_lowest: C8
dev.cpu.6.cx_supported: C1/1/1 C2/2/18
dev.cpu.6.%parent: acpi0
dev.cpu.6.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.6.%location: handle=\_PR_.C006
dev.cpu.6.%driver: cpu
dev.cpu.6.%desc: ACPI CPU
dev.cpu.5.temperature: 48.5C
dev.cpu.5.cx_method: C1/hlt C2/io
dev.cpu.5.cx_usage_counters: 4659 477757
dev.cpu.5.cx_usage: 0.96% 99.03% last 128292us
dev.cpu.5.cx_lowest: C8
dev.cpu.5.cx_supported: C1/1/1 C2/2/18
dev.cpu.5.%parent: acpi0
dev.cpu.5.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.5.%location: handle=\_PR_.C005
dev.cpu.5.%driver: cpu
dev.cpu.5.%desc: ACPI CPU
dev.cpu.4.temperature: 48.5C
dev.cpu.4.cx_method: C1/hlt C2/io
dev.cpu.4.cx_usage_counters: 5746 698691
dev.cpu.4.cx_usage: 0.81% 99.18% last 8754us
dev.cpu.4.cx_lowest: C8
dev.cpu.4.cx_supported: C1/1/1 C2/2/18
dev.cpu.4.%parent: acpi0
dev.cpu.4.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.4.%location: handle=\_PR_.C004
dev.cpu.4.%driver: cpu
dev.cpu.4.%desc: ACPI CPU
dev.cpu.3.temperature: 48.5C
dev.cpu.3.cx_method: C1/hlt C2/io
dev.cpu.3.cx_usage_counters: 4708 483212
dev.cpu.3.cx_usage: 0.96% 99.03% last 115489us
dev.cpu.3.cx_lowest: C8
dev.cpu.3.cx_supported: C1/1/1 C2/2/18
dev.cpu.3.%parent: acpi0
dev.cpu.3.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.3.%location: handle=\_PR_.C003
dev.cpu.3.%driver: cpu
dev.cpu.3.%desc: ACPI CPU
dev.cpu.2.temperature: 48.5C
dev.cpu.2.cx_method: C1/hlt C2/io
dev.cpu.2.cx_usage_counters: 5096 539661
dev.cpu.2.cx_usage: 0.93% 99.06% last 40502us
dev.cpu.2.cx_lowest: C8
dev.cpu.2.cx_supported: C1/1/1 C2/2/18
dev.cpu.2.%parent: acpi0
dev.cpu.2.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.2.%location: handle=\_PR_.C002
dev.cpu.2.%driver: cpu
dev.cpu.2.%desc: ACPI CPU
dev.cpu.1.temperature: 48.5C
dev.cpu.1.cx_method: C1/hlt C2/io
dev.cpu.1.cx_usage_counters: 4564 466781
dev.cpu.1.cx_usage: 0.96% 99.03% last 120392us
dev.cpu.1.cx_lowest: C8
dev.cpu.1.cx_supported: C1/1/1 C2/2/18
dev.cpu.1.%parent: acpi0
dev.cpu.1.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.1.%location: handle=\_PR_.C001
dev.cpu.1.%driver: cpu
dev.cpu.1.%desc: ACPI CPU
dev.cpu.0.temperature: 48.5C
dev.cpu.0.cx_method: C1/hlt C2/io
dev.cpu.0.cx_usage_counters: 5075 845559
dev.cpu.0.cx_usage: 0.59% 99.40% last 5814us
dev.cpu.0.cx_lowest: C8
dev.cpu.0.cx_supported: C1/1/1 C2/2/18
dev.cpu.0.freq_levels: 3800/4180 2800/2800 2200/1980
dev.cpu.0.freq: 3800
dev.cpu.0.%parent: acpi0
dev.cpu.0.%pnpinfo: _HID=none _UID=0 _CID=none
dev.cpu.0.%location: handle=\_PR_.C000
dev.cpu.0.%driver: cpu
dev.cpu.0.%desc: ACPI CPU
dev.cpu.%parent:

5
Hardware and Performance / Unable to boost higher than 3.8Ghz on zen3 5800X
« on: March 23, 2024, 09:38:57 pm »
Somehow my CPU is unable to boost higher than 3.8Ghz on opnsense.
When I boot the exact same hardware on debian all core reach 4.7-4.8Ghz easily.

When I check sysctl output it clearly show that opnsense is unable to manage higher than 3.8Ghz


Quote
sysctl hw.acpi
Code: [Select]
hw.acpi.cpu.cx_lowest: C8
hw.acpi.cpu.cppc_notify: 1
hw.acpi.reset_video: 0
hw.acpi.handle_reboot: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.verbose: 0
hw.acpi.s4bios: 0
hw.acpi.sleep_delay: 1
hw.acpi.suspend_state: S3
hw.acpi.standby_state: NONE
hw.acpi.lid_switch_state: NONE
hw.acpi.sleep_button_state: S3
hw.acpi.power_button_state: S5
hw.acpi.supported_sleep_state: S3 S4 S5

Quote
sysctl dev.cpu.0.freq
Code: [Select]
dev.cpu.0.freq: 3800

Quote
sysctl dev.cpu.0.freq_levels
Code: [Select]
dev.cpu.0.freq_levels: 3800/4180 2800/2800 2200/1980

OPNsense 24.1.2_1-amd64

6
22.1 Legacy Series / Re: os-ddclient
« on: February 17, 2022, 01:19:57 am »
Btw I've looked at the ddclient project, since 3.9.1 there have been no release in two year. Some people seem to still be working on it though.
Gandi service as been added to the develop branch, for example, like many other services, but at the pace of the project release version, it will be a long time before we can see those services in opnsense.

7
22.1 Legacy Series / Re: os-ddclient
« on: February 17, 2022, 12:25:08 am »
Franco, I'm trying to add gandi as provider, could you please tell me after I've forked the repo, how can I test the change I made on the plugin on my opnsense install ?

Like that I can test, validate, use it and ask for merge request !

Edit: please tell me I don't have to manually patch the files on my opnsense install ^^

8
22.1 Legacy Series / Re: os-ddclient
« on: February 11, 2022, 03:13:09 am »
I've checked, protocol=gandi does exist on 3.9.1.

Code: [Select]
Dynamic DNS services currently supported include:

DynDNS.com  - See http://www.dyndns.com for details on obtaining a free account.
Zoneedit    - See http://www.zoneedit.com for details.
EasyDNS     - See http://www.easydns.com for details.
NameCheap   - See http://www.namecheap.com for details
DslReports  - See http://www.dslreports.com for details
Sitelutions - See http://www.sitelutions.com for details
Loopia      - See http://www.loopia.se for details
Noip        - See http://www.noip.com/ for details
Freedns     - See http://freedns.afraid.org/ for details
ChangeIP    - See http://www.changeip.com/ for details
nsupdate    - See nsupdate(1) and ddns-confgen(8) for details
CloudFlare  - See https://www.cloudflare.com/ for details
Google      - See http://www.google.com/domains for details
Duckdns     - See https://duckdns.org/ for details
Freemyip    - See https://freemyip.com for details
woima.fi    - See https://woima.fi/ for details
Yandex      - See https://domain.yandex.com/ for details
DNS Made Easy - See https://dnsmadeeasy.com/ for details
DonDominio  - See https://www.dondominio.com for details
NearlyFreeSpeech.net - See https://www.nearlyfreespeech.net/services/dns for details
OVH         - See https://www.ovh.com for details
ClouDNS     - See https://www.cloudns.net
dinahosting - See https://dinahosting.com
Gandi       - See https://gandi.net
dnsexit     - See https://dnsexit.com/ for details
1984.is     - See https://www.1984.is/product/freedns/ for details

Comparing to the huge list of service available on dyndns, it's really embarrassing to force ppl to move to ddclient, that in his current stat on opnsense, only support 7-8 protocol ...
When dyndns supported about 60 DNS services ...

In my case, I'm using gandi. If I switch (or forced to switch to on version 22.7) to the ddclient plugin on opnsense, I won't been able to use it for Gandi anymore.
This is a major downgrade for me, and shouldn't happen in this current stat.

You need to at least support all the protocol available (cf. list on top) to even consider moving to ddclient.

9
19.1 Legacy Series / Re: Starting web GUI...failed.
« on: March 25, 2019, 07:54:52 pm »
Quote from: franco on March 25, 2019, 07:46:24 am
You've set "Listen Interfaces" under System: Settings: Administration despite the warning.

I just simply upgraded to 19.x some week ago and seen this error recently. No change in configuration since about a year ago.

10
19.1 Legacy Series / Starting web GUI...failed.
« on: March 24, 2019, 02:05:36 pm »
Somehow I wasn't able to connect to the WebUI. Rebooting didn't change the problem, still wasn't able to use WebUI.

Login as SSH was fine, so tried a few things.


First, tried to restart services. Failed.
Code: [Select]
  0) Logout                              7) Ping host
  1) Assign interfaces                   8) Shell
  2) Set interface IP address            9) pfTop
  3) Reset the root password            10) Firewall log
  4) Reset to factory defaults          11) Reload all services
  5) Power off system                   12) Update from console
  6) Reboot system                      13) Restore a backup

Enter an option: 11

Writing firmware setting...done.
Configuring login behaviour...done.
Configuring CRON...done.
Setting timezone...done.
Setting hostname: OPNsense.localdomain
Generating /etc/hosts...done.
Generating /etc/resolv.conf...done.
Configuring loopback interface...done.
Creating wireless clone interfaces...done.
Configuring VLAN interfaces...done.
Configuring WAN interface...done.
Configuring WIFI interface...done.
Configuring LAN interface...done.
Setting up routes...done.
Configuring firewall.......done.
Starting DHCPv4 service...done.
Starting DHCPv6 service...done.
Starting router advertisement service...done.
Starting NTP service...done.
Configuring OpenSSH...done.
Starting Unbound DNS...done.
Starting web GUI...failed.
Generating RRD graphs...done.



Second, tried to restart manually web ui. Failed.
Code: [Select]
/usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf
2019-03-24 13:53:46: (network.c.309) can't bind to socket: [2a01:cb08:1cb:xxxx:xxxx:xxxx:xxxx:xxxx]:443 Can't assign requested address



Third, tried to update. Success ?!
Code: [Select]
  0) Logout                              7) Ping host
  1) Assign interfaces                   8) Shell
  2) Set interface IP address            9) pfTop
  3) Reset the root password            10) Firewall log
  4) Reset to factory defaults          11) Reload all services
  5) Power off system                   12) Update from console
  6) Reboot system                      13) Restore a backup

Enter an option: 12

Fetching change log information, please wait... done

This will automatically fetch all available updates, apply them,
and reboot if necessary.

Proceed with this action? [y/N]: y

Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
Checking for upgrades (0 candidates): . done
Processing candidates (0 candidates): . done
Checking integrity... done (0 conflicting)
Your packages are up to date.
Checking integrity... done (0 conflicting)
Nothing to do.
Nothing to do.
Starting web GUI...done.
Generating RRD graphs...done.



Finally, tried to restart all service. Success.
Code: [Select]
  0) Logout                              7) Ping host
  1) Assign interfaces                   8) Shell
  2) Set interface IP address            9) pfTop
  3) Reset the root password            10) Firewall log
  4) Reset to factory defaults          11) Reload all services
  5) Power off system                   12) Update from console
  6) Reboot system                      13) Restore a backup

Enter an option: 11

Writing firmware setting...done.
Configuring login behaviour...done.
Configuring CRON...done.
Setting timezone...done.
Setting hostname: OPNsense.localdomain
Generating /etc/hosts...done.
Generating /etc/resolv.conf...done.
Configuring loopback interface...done.
Creating wireless clone interfaces...done.
Configuring VLAN interfaces...done.
Configuring WAN interface...done.
Configuring WIFI interface...done.
Configuring LAN interface...done.
Setting up routes...done.
Configuring firewall.......done.
Starting DHCPv4 service...done.
Starting DHCPv6 service...done.
Starting router advertisement service...done.
Starting NTP service...done.
Configuring OpenSSH...done.
Starting Unbound DNS...done.
Starting web GUI...done.
Generating RRD graphs...done.


Each time I reboot the server, the WebUI fail to start !



System log

Code: [Select]
Mar 24 14:10:33 OPNsense kernel: em0: link state changed to DOWN
Mar 24 14:10:33 OPNsense sshlockout[67371]: sshlockout/webConfigurator v3.0 starting up
Mar 24 14:10:33 OPNsense kernel: vlan0: changing name to 'em0_vlan832'
Mar 24 14:10:33 OPNsense dhclient[51772]: /var/etc/dhclient_wan.conf line 8: rfc3118-auth: unexpected option name.
Mar 24 14:10:33 OPNsense dhclient[51772]:       request subnet-mask, broadcast-address, dhcp-lease-time, dhcp-renewal-time, dhc
Mar 24 14:10:33 OPNsense dhclient[51772]: ^
Mar 24 14:10:33 OPNsense dhclient[51772]: /var/etc/dhclient_wan.conf line 9: expecting a statement.
Mar 24 14:10:33 OPNsense dhclient[51772]:       send-interface
Mar 24 14:10:33 OPNsense dhclient[51772]:  ^
Mar 24 14:10:33 OPNsense dhclient[51772]: /var/etc/dhclient_wan.conf line 10: semicolon expected.
Mar 24 14:10:33 OPNsense dhclient[51772]:       vlan-id
Mar 24 14:10:33 OPNsense dhclient[51772]:  ^
Mar 24 14:10:36 OPNsense kernel:
Mar 24 14:10:36 OPNsense kernel: em0: link state changed to UP
Mar 24 14:10:36 OPNsense kernel: em0_vlan832: link state changed to UP
Mar 24 14:10:37 OPNsense dhclient: Starting delete_old_states()
Mar 24 14:10:37 OPNsense dhclient[51772]: DHCPDISCOVER on em0_vlan832 to 255.255.255.255 port 67 interval 6
Mar 24 14:10:37 OPNsense dhclient[51772]: DHCPOFFER from 80.xxx.xxx.xxx
Mar 24 14:10:37 OPNsense dhclient[51772]: unknown dhcp option value 0x5a
Mar 24 14:10:37 OPNsense dhclient[51772]: unknown dhcp option value 0x78
Mar 24 14:10:37 OPNsense dhclient[51772]: unknown dhcp option value 0x7d
Mar 24 14:10:39 OPNsense dhclient[51772]: DHCPREQUEST on em0_vlan832 to 255.255.255.255 port 67
Mar 24 14:10:39 OPNsense dhclient[51772]: DHCPACK from 80.xxx.xxx.xxx
Mar 24 14:10:39 OPNsense dhclient[51772]: unknown dhcp option value 0x5a
Mar 24 14:10:39 OPNsense dhclient[51772]: unknown dhcp option value 0x78
Mar 24 14:10:39 OPNsense dhclient[51772]: unknown dhcp option value 0x7d
Mar 24 14:10:39 OPNsense dhclient: Starting delete_old_states()
Mar 24 14:10:39 OPNsense dhclient: New IP Address (em0_vlan832): 86.xxx.xxx.xxx
Mar 24 14:10:39 OPNsense dhclient: New Subnet Mask (em0_vlan832): 255.xxx.xxx.xxx
Mar 24 14:10:39 OPNsense dhclient: New Broadcast Address (em0_vlan832): 86.xxx.xxx.xxx
Mar 24 14:10:39 OPNsense dhclient: New Routers (em0_vlan832): 86.xxx.xxx.xxx
Mar 24 14:10:39 OPNsense dhclient: route add default 86.xxx.xxx.xxx
Mar 24 14:10:39 OPNsense dhclient: Creating resolv.conf
Mar 24 14:10:39 OPNsense opnsense: /usr/local/etc/rc.newwanip: IP renewal deferred during boot on 'em0_vlan832'
Mar 24 14:10:39 OPNsense dhclient[51772]: bound to 86.xxx.xxx.xxx -- renewal in 84573 seconds.
Mar 24 14:10:39 OPNsense opnsense: /usr/local/etc/rc.bootup: Accept router advertisements on interface em0_vlan832
Mar 24 14:10:39 OPNsense dhcp6c[57696]: /var/etc/dhcp6c_wan.conf 3: Got raw option: 6 00:0b:00:xx:xx:xx:xx:xx
Mar 24 14:10:39 OPNsense dhcp6c[57696]: /var/etc/dhcp6c_wan.conf 3: Raw option 6 length 8 stored at 0x3d07cxxxxxx with data at 0x3d07cxxxxxx
Mar 24 14:10:39 OPNsense dhcp6c[57696]: /var/etc/dhcp6c_wan.conf 4: Got raw option: 15 00:2b:46:53:56:44:53:4c:5f:6c:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
Mar 24 14:10:39 OPNsense dhcp6c[57696]: /var/etc/dhcp6c_wan.conf 4: Raw option 15 length 45 stored at 0x3d07cxxxxxx with data at 0x3d07cxxxxxx
Mar 24 14:10:39 OPNsense dhcp6c[57696]: /var/etc/dhcp6c_wan.conf 5: Got raw option: 16 00:00:04:0e:00:05:73:61:67:65:6d
Mar 24 14:10:39 OPNsense dhcp6c[57696]: /var/etc/dhcp6c_wan.conf 5: Raw option 16 length 11 stored at 0x3d07cxxxxxx with data at 0x3d07cxxxxxx
Mar 24 14:10:39 OPNsense dhcp6c[57696]: /var/etc/dhcp6c_wan.conf 6: Got raw option: 11 00:00:00:00:00:00:00:00:00:00:00:1a:09:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
Mar 24 14:10:39 OPNsense dhcp6c[57696]: /var/etc/dhcp6c_wan.conf 6: Raw option 11 length 70 stored at 0x3d07cxxxxxx with data at 0x3d07cxxxxxx
Mar 24 14:10:39 OPNsense dhcp6c[57696]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:39 OPNsense dhcp6c[57696]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:39 OPNsense dhcp6c[57696]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:39 OPNsense dhcp6c[57696]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:39 OPNsense kernel: em2: link state changed to DOWN
Mar 24 14:10:39 OPNsense kernel:
Mar 24 14:10:39 OPNsense kernel: em1: link state changed to DOWN
Mar 24 14:10:40 OPNsense dhcp6c[78781]: Sending Solicit
Mar 24 14:10:40 OPNsense dhcp6c[78781]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:40 OPNsense dhcp6c[78781]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:40 OPNsense dhcp6c[78781]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:40 OPNsense dhcp6c[78781]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:40 OPNsense dhcp6c[78781]: Sending Request
Mar 24 14:10:40 OPNsense dhcp6c[78781]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:40 OPNsense dhcp6c[78781]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:40 OPNsense dhcp6c[78781]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:40 OPNsense dhcp6c[78781]:     freeing op data at 0x3d07cxxxxxx
Mar 24 14:10:40 OPNsense kernel: pflog0: promiscuous mode enabled
Mar 24 14:10:40 OPNsense dhcp6c[78781]: Received REPLY for REQUEST
Mar 24 14:10:40 OPNsense dhcp6c[78781]: add an address 2a01:cb08:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/64 on em1
Mar 24 14:10:40 OPNsense dhcp6c: dhcp6c REQUEST on em0_vlan832
Mar 24 14:10:40 OPNsense dhcp6c: dhcp6c REQUEST on em0_vlan832 - running newipv6
Mar 24 14:10:40 OPNsense opnsense: /usr/local/etc/rc.newwanipv6: IP renewal deferred during boot on 'em0_vlan832'
Mar 24 14:10:40 OPNsense kernel: ...
Mar 24 14:10:40 OPNsense kernel: done.
Mar 24 14:10:40 OPNsense kernel: done.
Mar 24 14:10:40 OPNsense sshd[67550]: Server listening on ::1 port 22.
Mar 24 14:10:40 OPNsense sshd[67550]: Server listening on 127.0.0.1 port 22.
Mar 24 14:10:40 OPNsense sshd[67550]: error: Bind to port 22 on 2a01:cb08:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx failed: Can't assign requested address.
Mar 24 14:10:40 OPNsense sshd[67550]: error: Bind to port 22 on 2a01:cb08:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx failed: Can't assign requested address.
Mar 24 14:10:40 OPNsense sshd[67550]: Server listening on 192.168.1.1 port 22.
Mar 24 14:10:41 OPNsense opnsense: /usr/local/etc/rc.bootup: The command '/usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf' returned exit code '255', the output was '2019-03-24 14:10:41: (network.c.309) can't bind to socket: [2a01:cb08:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]:443 Can't assign requested address'
Mar 24 14:10:41 OPNsense kernel: failed.
Mar 24 14:10:41 OPNsense opnsense: /usr/local/etc/rc.bootup: ROUTING: entering configure using defaults
Mar 24 14:10:41 OPNsense kernel: done.
Mar 24 14:10:41 OPNsense opnsense: /usr/local/etc/rc.bootup: ROUTING: no IPv4 default gateway set, assuming wan
Mar 24 14:10:41 OPNsense opnsense: /usr/local/etc/rc.bootup: ROUTING: no IPv6 default gateway set, assuming wan
Mar 24 14:10:41 OPNsense opnsense: /usr/local/etc/rc.bootup: ROUTING: setting IPv4 default route to 86.252.184.1
Mar 24 14:10:41 OPNsense opnsense: /usr/local/etc/rc.bootup: ROUTING: keeping current default gateway '86.252.184.1'
Mar 24 14:10:41 OPNsense opnsense: /usr/local/etc/rc.bootup: ROUTING: skipping IPv6 default route
Mar 24 14:10:41 OPNsense kernel: done.
Mar 24 14:10:41 OPNsense kernel: done.
Mar 24 14:10:41 OPNsense kernel: done.
Mar 24 14:10:41 OPNsense kernel: done.
Mar 24 14:10:41 OPNsense kernel: done.

11
Development and Code Review / Re: Error while compiling htop on 18.7.5_1-amd64
« on: October 22, 2018, 09:30:56 pm »
Code: [Select]
===>  Installing for htop-2.2.0
===>  Checking if htop already installed
===>   Registering installation for htop-2.2.0
Installing htop-2.2.0...

Cheers, thanks for the help !

12
Development and Code Review / Re: Error while compiling htop on 18.7.5_1-amd64
« on: October 21, 2018, 09:27:07 pm »
Code: [Select]
root@******:/usr/ports # git status
HEAD detached at 18.7
Untracked files:
  (use "git add <file>..." to include in what will be committed)

        distfiles/

nothing added to commit but untracked files present (use "git add" to track)

Code: [Select]
--- dnode2.o ---
In file included from dnode2.c:56:
In file included from /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zfs_znode.h:33:
In file included from /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h:47:
In file included from /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zfs_context.h:73:
In file included from /usr/src/sys/cddl/compat/opensolaris/sys/vfs.h:37:
/usr/src/sys/cddl/compat/opensolaris/sys/vnode.h:243:10: warning: implicit declaration of function 'VOP_FSYNC' is invalid in C99 [-Wimplicit-function-declaration]
        error = VOP_FSYNC(vp, MNT_WAIT, curthread);
                ^
--- lib/liblsof.a ---
2 warnings and 1 error generated.
*** [ckkv.o] Error code 1

make[3]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd/lib
1 error

make[3]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd/lib
*** [lib/liblsof.a] Error code 2

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
--- dnode2.o ---
2 warnings generated.
A failure has been detected in another branch of the parallel make

make[3]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
*** [dnode2.o] Error code 2

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
6 errors

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
===> Compilation failed unexpectedly.
Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to
the maintainer.
*** Error code 1

Stop.
make[1]: stopped in /usr/ports/sysutils/lsof
*** Error code 1

Stop.
make: stopped in /usr/ports/sysutils/htop

I do remember that the first try (compilation) I did, i had some error on lsof trying to download something but with a timeout.

13
Development and Code Review / Re: Error while compiling htop on 18.7.5_1-amd64
« on: October 21, 2018, 08:25:29 pm »
Quote from: franco on October 21, 2018, 08:24:21 pm
Are you using our ports tree?

Can you be more specific, I dont really understand the "Are you using our ports tree?" ^^

I just did "opnsense-code tools ports src" to checkout the sources and try compiling.
So I would guest, yes probably using ports.

14
Development and Code Review / Re: Error while compiling htop on 18.7.5_1-amd64
« on: October 21, 2018, 08:22:17 pm »
Code: [Select]
===>  Building for lsof-4.92.b,8
--- version.h ---
--- lib/liblsof.a ---
--- dmnt.o ---
--- dnode.o ---
--- dnode1.o ---
--- dnode2.o ---
--- version.h ---
Constructing version.h
--- lib/liblsof.a ---
(cd lib; /usr/bin/make DEBUG="-O2" CFGF="-pipe -fPIE -fPIC -fsanitize=safe-stack -fstack-protector-all -fno-strict-aliasing -DNEEDS_BOOL_TYPEDEF -DHASTASKS -DHAS_PAUSE_SBT -DHAS_DUP2 -DHAS_CLOSEFROM -DHASEFFNLINK=i_effnlink -DHASF_VNODE -DHAS_FILEDESCENT -DHAS_TMPFS -DHASWCTYPE_H -DHASSBSTATE -DHAS_KVM_VNODE -DHAS_UFS1_2 -DHAS_NO_IDEV -DHAS_VM_MEMATTR_T -DHAS_CDEV2PRIV -DHAS_NO_SI_UDEV -DHAS_SYS_SX_H -DHASFUSEFS -DHAS_ZFS -DHAS_V_LOCKF -DHAS_LOCKF_ENTRY -DHAS_NO_6PORT -DHAS_NO_6PPCB -DNEEDS_BOOLEAN_T -DHAS_SB_CCC -DHAS_FDESCENTTBL -DFREEBSDV=11000 -DHASFDESCFS=2 -DHASPSEUDOFS -DHASNULLFS -DHASIPv6 -DHASUTMPX -DHAS_STRFTIME -DLSOF_VSTR=\"11.1-RELEASE-p14\"")
--- dmnt.o ---
cc  -pipe -fPIE -fPIC -fsanitize=safe-stack -fstack-protector-all -fno-strict-aliasing -DNEEDS_BOOL_TYPEDEF -DHASTASKS -DHAS_PAUSE_SBT -DHAS_DUP2 -DHAS_CLOSEFROM -DHASEFFNLINK=i_effnlink -DHASF_VNODE -DHAS_FILEDESCENT -DHAS_TMPFS -DHASWCTYPE_H -DHASSBSTATE -DHAS_KVM_VNODE -DHAS_UFS1_2 -DHAS_NO_IDEV -DHAS_VM_MEMATTR_T -DHAS_CDEV2PRIV -DHAS_NO_SI_UDEV -DHAS_SYS_SX_H -DHASFUSEFS -DHAS_ZFS -DHAS_V_LOCKF -DHAS_LOCKF_ENTRY -DHAS_NO_6PORT -DHAS_NO_6PPCB -DNEEDS_BOOLEAN_T -DHAS_SB_CCC -DHAS_FDESCENTTBL -DFREEBSDV=11000 -DHASFDESCFS=2 -DHASPSEUDOFS -DHASNULLFS -DHASIPv6 -DHASUTMPX -DHAS_STRFTIME -DLSOF_VSTR=\"11.1-RELEASE-p14\" -I/usr/src/sys -O2 -c dmnt.c -o dmnt.o
--- dnode.o ---
cc  -pipe -fPIE -fPIC -fsanitize=safe-stack -fstack-protector-all -fno-strict-aliasing -DNEEDS_BOOL_TYPEDEF -DHASTASKS -DHAS_PAUSE_SBT -DHAS_DUP2 -DHAS_CLOSEFROM -DHASEFFNLINK=i_effnlink -DHASF_VNODE -DHAS_FILEDESCENT -DHAS_TMPFS -DHASWCTYPE_H -DHASSBSTATE -DHAS_KVM_VNODE -DHAS_UFS1_2 -DHAS_NO_IDEV -DHAS_VM_MEMATTR_T -DHAS_CDEV2PRIV -DHAS_NO_SI_UDEV -DHAS_SYS_SX_H -DHASFUSEFS -DHAS_ZFS -DHAS_V_LOCKF -DHAS_LOCKF_ENTRY -DHAS_NO_6PORT -DHAS_NO_6PPCB -DNEEDS_BOOLEAN_T -DHAS_SB_CCC -DHAS_FDESCENTTBL -DFREEBSDV=11000 -DHASFDESCFS=2 -DHASPSEUDOFS -DHASNULLFS -DHASIPv6 -DHASUTMPX -DHAS_STRFTIME -DLSOF_VSTR=\"11.1-RELEASE-p14\" -I/usr/src/sys -O2 -c dnode.c -o dnode.o
--- dnode1.o ---
cc  -pipe -fPIE -fPIC -fsanitize=safe-stack -fstack-protector-all -fno-strict-aliasing -DNEEDS_BOOL_TYPEDEF -DHASTASKS -DHAS_PAUSE_SBT -DHAS_DUP2 -DHAS_CLOSEFROM -DHASEFFNLINK=i_effnlink -DHASF_VNODE -DHAS_FILEDESCENT -DHAS_TMPFS -DHASWCTYPE_H -DHASSBSTATE -DHAS_KVM_VNODE -DHAS_UFS1_2 -DHAS_NO_IDEV -DHAS_VM_MEMATTR_T -DHAS_CDEV2PRIV -DHAS_NO_SI_UDEV -DHAS_SYS_SX_H -DHASFUSEFS -DHAS_ZFS -DHAS_V_LOCKF -DHAS_LOCKF_ENTRY -DHAS_NO_6PORT -DHAS_NO_6PPCB -DNEEDS_BOOLEAN_T -DHAS_SB_CCC -DHAS_FDESCENTTBL -DFREEBSDV=11000 -DHASFDESCFS=2 -DHASPSEUDOFS -DHASNULLFS -DHASIPv6 -DHASUTMPX -DHAS_STRFTIME -DLSOF_VSTR=\"11.1-RELEASE-p14\" -I/usr/src/sys -O2 -c dnode1.c -o dnode1.o
--- dproc.o ---
cc  -pipe -fPIE -fPIC -fsanitize=safe-stack -fstack-protector-all -fno-strict-aliasing -DNEEDS_BOOL_TYPEDEF -DHASTASKS -DHAS_PAUSE_SBT -DHAS_DUP2 -DHAS_CLOSEFROM -DHASEFFNLINK=i_effnlink -DHASF_VNODE -DHAS_FILEDESCENT -DHAS_TMPFS -DHASWCTYPE_H -DHASSBSTATE -DHAS_KVM_VNODE -DHAS_UFS1_2 -DHAS_NO_IDEV -DHAS_VM_MEMATTR_T -DHAS_CDEV2PRIV -DHAS_NO_SI_UDEV -DHAS_SYS_SX_H -DHASFUSEFS -DHAS_ZFS -DHAS_V_LOCKF -DHAS_LOCKF_ENTRY -DHAS_NO_6PORT -DHAS_NO_6PPCB -DNEEDS_BOOLEAN_T -DHAS_SB_CCC -DHAS_FDESCENTTBL -DFREEBSDV=11000 -DHASFDESCFS=2 -DHASPSEUDOFS -DHASNULLFS -DHASIPv6 -DHASUTMPX -DHAS_STRFTIME -DLSOF_VSTR=\"11.1-RELEASE-p14\" -I/usr/src/sys -O2 -c dproc.c -o dproc.o
--- dnode2.o ---
--- dnode2.o ---
--- lib/liblsof.a ---
--- ckkv.o ---
--- dnode2.o ---
cc -pipe -fPIE -fPIC -fsanitize=safe-stack -fstack-protector-all -fno-strict-aliasing -DNEEDS_BOOL_TYPEDEF -DFREEBSDV=11000 -DHAS_ZFS -DHAS_CV_TIMEDWAIT_SBT -DHAS_V_LOCKF -D_SOLARIS_C_SOURCE -O2 -I/usr/src/sys/cddl/compat/opensolaris -I/usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs -I/usr/src/sys/cddl/contrib/opensolaris/uts/common/zmod -I/usr/src/sys/cddl/contrib/opensolaris/uts/common -I/usr/src/sys/cddl/contrib/opensolaris/common/zfs -I/usr/src/sys/cddl/contrib/opensolaris/common -I/usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd/usr/src/include -I`pwd` -c dnode2.c -o dnode2.o
--- lib/liblsof.a ---
cc  -pipe -fPIE -fPIC -fsanitize=safe-stack -fstack-protector-all -fno-strict-aliasing -DNEEDS_BOOL_TYPEDEF -DHASTASKS -DHAS_PAUSE_SBT -DHAS_DUP2 -DHAS_CLOSEFROM -DHASEFFNLINK=i_effnlink -DHASF_VNODE -DHAS_FILEDESCENT -DHAS_TMPFS -DHASWCTYPE_H -DHASSBSTATE -DHAS_KVM_VNODE -DHAS_UFS1_2 -DHAS_NO_IDEV -DHAS_VM_MEMATTR_T -DHAS_CDEV2PRIV -DHAS_NO_SI_UDEV -DHAS_SYS_SX_H -DHASFUSEFS -DHAS_ZFS -DHAS_V_LOCKF -DHAS_LOCKF_ENTRY -DHAS_NO_6PORT -DHAS_NO_6PPCB -DNEEDS_BOOLEAN_T -DHAS_SB_CCC -DHAS_FDESCENTTBL -DFREEBSDV=11000 -DHASFDESCFS=2 -DHASPSEUDOFS -DHASNULLFS -DHASIPv6 -DHASUTMPX -DHAS_STRFTIME -DLSOF_VSTR="11.1-RELEASE-p14" -I/usr/src/sys -O2 -c ckkv.c -o ckkv.o
--- dnode.o ---
In file included from dnode.c:39:
--- dmnt.o ---
In file included from dmnt.c:39:
In file included from ./lsof.h:221:
In file included from ./dlsof.h:106:
In file included from /usr/src/sys/sys/conf.h:44:
/usr/src/sys/sys/eventhandler.h:324:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_attach_fn)(void *, device_t);
                                         ^
/usr/src/sys/sys/eventhandler.h:325:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_detach_fn)(void *, device_t, enum evhdev_detach);
                                         ^
--- dnode.o ---
In file included from ./lsof.h:221:
In file included from ./dlsof.h:106:
In file included from /usr/src/sys/sys/conf.h:44:
/usr/src/sys/sys/eventhandler.h:324:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_attach_fn)(void *, device_t);
                                         ^
/usr/src/sys/sys/eventhandler.h:325:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_detach_fn)(void *, device_t, enum evhdev_detach);
                                         ^
--- dnode1.o ---
In file included from dnode1.c:42:
In file included from ./lsof.h:221:
In file included from ./dlsof.h:106:
In file included from /usr/src/sys/sys/conf.h:44:
/usr/src/sys/sys/eventhandler.h:324:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_attach_fn)(void *, device_t);
                                         ^
/usr/src/sys/sys/eventhandler.h:325:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_detach_fn)(void *, device_t, enum evhdev_detach);
                                         ^
--- dproc.o ---
In file included from dproc.c:38:
In file included from ./lsof.h:221:
In file included from ./dlsof.h:106:
In file included from /usr/src/sys/sys/conf.h:44:
/usr/src/sys/sys/eventhandler.h:324:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_attach_fn)(void *, device_t);
                                         ^
/usr/src/sys/sys/eventhandler.h:325:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_detach_fn)(void *, device_t, enum evhdev_detach);
                                         ^
--- dnode.o ---
In file included from dnode.c:39:
--- lib/liblsof.a ---
In file included from ckkv.c:43:
In file included from ./../lsof.h:221:
In file included from ./../dlsof.h:106:
In file included from /usr/src/sys/sys/conf.h:44:
/usr/src/sys/sys/eventhandler.h:324:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_attach_fn)(void *, device_t);
                                         ^
/usr/src/sys/sys/eventhandler.h:325:42: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
typedef void (*device_detach_fn)(void *, device_t, enum evhdev_detach);
                                         ^
--- dmnt.o ---
In file included from dmnt.c:39:
In file included from ./lsof.h:221:
In file included from ./dlsof.h:276:
/usr/src/sys/sys/proc.h:350:22: error: field has incomplete type 'struct syscall_args'
        struct syscall_args td_sa;      /* (kx) Syscall parameters. Copied on
                            ^
/usr/src/sys/sys/proc.h:180:8: note: forward declaration of 'struct syscall_args'
struct syscall_args;
       ^
--- dnode.o ---
In file included from ./lsof.h:221:
In file included from ./dlsof.h:276:
/usr/src/sys/sys/proc.h:350:22: error: field has incomplete type 'struct syscall_args'
        struct syscall_args td_sa;      /* (kx) Syscall parameters. Copied on
                            ^
/usr/src/sys/sys/proc.h:180:8: note: forward declaration of 'struct syscall_args'
struct syscall_args;
       ^
--- dnode1.o ---
In file included from dnode1.c:42:
In file included from ./lsof.h:221:
In file included from ./dlsof.h:276:
/usr/src/sys/sys/proc.h:350:22: error: field has incomplete type 'struct syscall_args'
        struct syscall_args td_sa;      /* (kx) Syscall parameters. Copied on
                            ^
/usr/src/sys/sys/proc.h:180:8: note: forward declaration of 'struct syscall_args'
struct syscall_args;
       ^
--- dproc.o ---
In file included from dproc.c:38:
In file included from ./lsof.h:221:
In file included from ./dlsof.h:276:
/usr/src/sys/sys/proc.h:350:22: error: field has incomplete type 'struct syscall_args'
        struct syscall_args td_sa;      /* (kx) Syscall parameters. Copied on
                            ^
/usr/src/sys/sys/proc.h:180:8: note: forward declaration of 'struct syscall_args'
struct syscall_args;
       ^
--- dnode2.o ---
In file included from dnode2.c:56:
In file included from /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zfs_znode.h:33:
In file included from /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h:47:
In file included from /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zfs_context.h:54:
/usr/src/sys/cddl/compat/opensolaris/sys/kcondvar.h:67:36: warning: implicit declaration of function 'nstosbt' is invalid in C99 [-Wimplicit-function-declaration]
        return (cv_timedwait_sbt(cvp, mp, nstosbt(tim), nstosbt(res), 0));
                                          ^
--- dnode1.o ---
2 warnings and 1 error generated.
*** [dnode1.o] Error code 1

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
--- dmnt.o ---
2 warnings and 1 error generated.
*** [dmnt.o] Error code 1

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
--- dnode.o ---
2 warnings and 1 error generated.
*** [dnode.o] Error code 1

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
--- lib/liblsof.a ---
In file included from ckkv.c:43:
In file included from ./../lsof.h:221:
In file included from ./../dlsof.h:276:
/usr/src/sys/sys/proc.h:350:22: error: field has incomplete type 'struct syscall_args'
        struct syscall_args td_sa;      /* (kx) Syscall parameters. Copied on
                            ^
/usr/src/sys/sys/proc.h:180:8: note: forward declaration of 'struct syscall_args'
struct syscall_args;
       ^
--- dproc.o ---
2 warnings and 1 error generated.
*** [dproc.o] Error code 1

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
--- dnode2.o ---
In file included from dnode2.c:56:
In file included from /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zfs_znode.h:33:
In file included from /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h:47:
In file included from /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zfs_context.h:73:
In file included from /usr/src/sys/cddl/compat/opensolaris/sys/vfs.h:37:
/usr/src/sys/cddl/compat/opensolaris/sys/vnode.h:243:10: warning: implicit declaration of function 'VOP_FSYNC' is invalid in C99 [-Wimplicit-function-declaration]
        error = VOP_FSYNC(vp, MNT_WAIT, curthread);
                ^
--- lib/liblsof.a ---
2 warnings and 1 error generated.
*** [ckkv.o] Error code 1

make[3]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd/lib
1 error

make[3]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd/lib
*** [lib/liblsof.a] Error code 2

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
--- dnode2.o ---
2 warnings generated.
A failure has been detected in another branch of the parallel make

make[3]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
*** [dnode2.o] Error code 2

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
6 errors

make[2]: stopped in /usr/obj/usr/ports/sysutils/lsof/work/lsof_4.92B.freebsd
===> Compilation failed unexpectedly.
Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to
the maintainer.
*** Error code 1

Stop.
make[1]: stopped in /usr/ports/sysutils/lsof
*** Error code 1

Stop.
make: stopped in /usr/ports/sysutils/htop

15
Development and Code Review / Error while compiling htop on 18.7.5_1-amd64
« on: October 21, 2018, 08:06:20 pm »
I've tryed to compile htop on 18.7.5_1-amd64, but it result in error.

I had already compiled htop on a previous version but since a new freesh reinstall (hdd erase), I can't compile anymore htop.

Pages: [1] 2
OPNsense is an OSS project © Deciso B.V. 2015 - 2024 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy     | XHTML | RSS | WAP2