Messages

1

18.1 Legacy Series / Re: ntpd not starting / system time wrong

« on: July 12, 2018, 10:58:34 am »

ok did it, but no change, still the same.

2

18.1 Legacy Series / Re: ntpd not starting / system time wrong

« on: July 12, 2018, 09:38:01 am »

i dont have any pps/gps config.

https://screenshots.firefox.com/0VBnJ05l9466PaLk/172.16.10.1

3

18.1 Legacy Series / OpnSense with Telekom Cloud PBX

« on: July 12, 2018, 08:59:55 am »

Hi,

are there any howtos/best practices to connect VOIP Telephones in an internal LAN to the Telekom Cloud PBX? Any experiences with this?

Regards,
memic

4

18.1 Legacy Series / ntpd not starting / system time wrong

« on: July 11, 2018, 07:36:40 pm »

Hi,

im on:

OPNsense 18.1.10-amd64
FreeBSD 11.1-RELEASE-p10
OpenSSL 1.0.2o 27 Mar 2018

Starting ntpd manually gives me:

# /usr/local/sbin/ntpd -n no -g -c /var/etc/ntpd.conf -p /var/run/ntpd.pid
 7 Mar 09:59:38 ntpd[55858]: ntpd 4.2.8p11@1.3728-o Fri Apr  6 00:59:02 UTC 2018 (1): Starting
 7 Mar 09:59:38 ntpd[55858]: Command line: /usr/local/sbin/ntpd -n no -g -c /var/etc/ntpd.conf -p /var/run/ntpd.pid
 7 Mar 09:59:38 ntpd[55858]: proto: precision = 0.533 usec (-21)
 7 Mar 09:59:38 ntpd[55858]: getconfig: Couldn't open </etc/ntp.conf>: No such file or directory
 7 Mar 09:59:38 ntpd[55858]: Listen and drop on 0 v6wildcard [::]:123
 7 Mar 09:59:38 ntpd[55858]: Listen and drop on 1 v4wildcard 0.0.0.0:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 2 igb0 [fe80::20d:b9ff:fe4c:c244%1]:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 3 igb0 172.16.10.1:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 4 igb1 [fe80::20d:b9ff:fe4c:c245%2]:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 5 igb1 192.168.2.2:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 6 igb1 [2003:a:123a:fb00:20d:b9ff:fe4c:c245]:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 7 igb2 172.16.11.1:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 8 igb2 [fe80::20d:b9ff:fe4c:c246%3]:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 9 lo0 [::1]:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 10 lo0 [fe80::1%4]:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 11 lo0 127.0.0.1:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 12 ovpns1 [fe80::20d:b9ff:fe4c:c244%8]:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 13 ovpns1 172.16.13.1:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 14 igb0_vlan1 [fe80::20d:b9ff:fe4c:c244%9]:123
 7 Mar 09:59:38 ntpd[55858]: Listen normally on 15 igb0_vlan2 [fe80::20d:b9ff:fe4c:c244%10]:123
 7 Mar 09:59:38 ntpd[55858]: Listening on routing socket on fd #36 for interface updates
 7 Mar 09:59:38 ntpd[55858]: mlockall(): Cannot allocate memory
 7 Mar 09:59:39 ntpd[55858]: ntpd exiting on signal 15 (Terminated)

System time is wrong, year 2017, so my vpn connections wont work.

Any ideas howto solve this?

Regards,
memic