Messages

Thanks for helping jelly :D Step1 worked after removing the space between msi and =.  Installation without trouble and able to boot from the ssd connected at sata. At step two i opened the shell and i`m logged in as root. I`m not familiar with shell commands, which command will open /boot/loader.conf.local: so i can add the line from step1?

-edit
I looked it up, is it something like: echo "hint.ahci.0.msi=2" >> /boot/loader.conf.local ?

echo "hint.ahci.0.msi=2' >> /boot/loader.conf.local worked. Thanks again jelly

Hi,

I`m new to opnsense and firewalls in general. After using a vpnclient on my pc for a while i tried to install opnsense on an itx system with a dual nic to route all network traffic trough a vpntunnel. During the install i encountered the following problem.

I boot from an usbstick with the vga installer and everything goes well until this message appears:



When i connect the same ssd to an usb adapter and i follow exactly the same procedure, there are no problems.
The system boots, opnsense is started without errors and my desktop is connected behind the opnsense firewall. i can reach the opnsence gui @192.168.1.1. How can i get the ssd working for opnsense on an sataport? The uefi-menu recognizes the disk so to me it seems there are no hardware problems.