Messages

1

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 11, 2018, 11:59:14 am »

Thanks for help, but I'm no longer using Opnsense. I also found this topic on opnsense forum, so now I have a proof that I'm not alone. The topic is 2 years old, and it describes exactly the same problem I'm facing.

https://forum.opnsense.org/index.php?topic=3966.0

As I said, I'm no longer on Opnsense, so thanks for your support.

2

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 10, 2018, 02:41:23 pm »

I think this topic should be closed. If nobody believes me that I'm doing exactly as I'm supposed to, than it doesn't make any sens to continue this. I posted all my config in screenshots and I tested it on virtualbox also tested it on my Dell optiplex PC. Same behaviour. I gues it's a bug somewhere. I'll try another time. Thanks for help anyway.

3

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 10, 2018, 12:37:37 pm »

I'm posting also status page.

4

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 09:53:05 pm »

Which version of opnsense are you using ?

5

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 08:36:45 pm »

I disabled any mask (empty) in pipe rule. Now it looks like it works, not so sure, but both clients dont exceed the max pipe bandwidth. Hard to tell if the get fair 50/50 download speed. I'm not using the queues.

6

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 08:18:20 pm »

Hey !!! I found the solution !

It was the mask Destination ! I unchecked it in pipe rule. Now it works !

7

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 08:07:20 pm »

I created only download pipe and download rule. 5Mb in this test. No upload no nothing else.




Can anyone confirm this scenario working for him ? In my case it doesn't. Just for simple test, I have connected two computers, both of them downloading at 5Mb at the same time, which gives 10Mb.

This shouldn't happen, because it violates the "pipe" max bandwidth which is only 5Mb no 10Mb.

8

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 06:24:33 pm »

Well I gues this is too complicated for me. I did exactly as in the wiki, exactly as anybody else posted before and still no luck. 

9

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 05:56:32 pm »

Sorry !

10

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 05:18:13 pm »

Well, the problem still persist, I did exactly as @tibere86 said. Still both pc's are consuming 8Mb together.... 

11

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 12:42:15 pm »

So it looks like I'm not the only one with this problem ?

12

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 10:40:11 am »

Could any of you post your traffic shaping config ? It would be very helpfull.

13

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 10:12:05 am »

Screenshots:



Pipeup-4Mb is wrong description, don't look at it It should be Pipeup-1Mb in pipes screenshot.

Here is the traffic graph when both users are downloading. It clearly shows that both of them are downloading at 4Mb, wchich gives 8Mb total. I don't even know what exactly I'm doing wrong. Mayjbe this is because of Virtualbox.

tinypics

14

18.1 Legacy Series / Re: Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 09:49:56 am »

Yes, I did it exactly as in "Share bandwidth evenly". I tested it with 4Mb download speed and 1Mb upload. But it looks that two machines can now download with 4Mb speed, wchich consumes 8Mb total....

15

18.1 Legacy Series / Traffic shaping (divide 10Mb evenly for 5 users)

« on: February 09, 2018, 08:06:10 am »

Hi
I't is my first post on this forum, so hello to everyone.

Yesterday I have installed opnsense on my virtualbox machine to test it before installing it on a Dell Optiplex PC. Everything works as expected, which means great .

Here comes the problem. I'm not yet traffic shaping guru and I don't know how to accomplish one task. I have 10Mb download and 2Mb upload isp connection speed. I would like to share it evenly with 5 users. I mean when everybody downloads something from internet each of the users get 2Mb download speed. When only one user is connected to router and bandwidth is free that user downloads at max 10Mb speed. Is this possible ?

I did that using opnsense wiki reading "share evenly" but it doesn't work that way. It just allocate max 2Mb to everyone.

Little help ?