Show Posts
1
18.1 Legacy Series / Re: Upgrade 17.7.12_1 to 18.1: Lost IPv4 connectivity from configured networks
« on: January 30, 2018, 08:55:42 am »
Hi,
i lost IPv4 connectivity too. But only on some networks.
I have 2 internet connections. A Fibre Link that has IPv6 & IPv4+CGN and a DSL Link that is IPv4 only.
My interfaces:
I have already updated my rules regarding the ICMP changes.
LAN had IPv6 only until i changed the default Gateway to the Router of the DSL link.
The network WLAN has v4(DSL)+v6(Fibre) Internet. WLANGAST and MULTIMEDIA only via IPv6.
The ruleset of WLAN and MULTIMEDIA are nearly the same. I don't understand why WLAN works and MULTIMEDIA not.
IOT doesn't need Internet Access and i have not yet checked it.
I use hybrid outgoing NAT.
I don't use the multiWAN feature for automatic gateway switching, because the DSL link is too slow. My preffered link is the fibre link.
I think problem relies to the apinger, but i'm not sure.
I had the same problem as i tried the 18.1r1 two weeks ago, but i thought it was a beta problem and didn't had the time to debug. As i switched back to 17.7 my configuration worked fine again.
@tgurr: I don't think it is a PPPoE Problem. As you can see i have a DSL Router that gives me a private Ethernet istead of PPPoE to the opnsense and ithink we are experiencing the same problems.
Thanks for your support.
i lost IPv4 connectivity too. But only on some networks.
I have 2 internet connections. A Fibre Link that has IPv6 & IPv4+CGN and a DSL Link that is IPv4 only.
My interfaces:
Code: [Select]
IOT (re0_vlan34) -> v4: 192.168.129.1/24
v6/t6: 2a00:XXXX:1efc:6d81:20d:b9ff:fe33:9214/64
LAN (re1) -> v4: 192.168.123.129/25
v6/t6: 2a00:XXXX:1efc:6d7b:20d:b9ff:fe33:9215/64
MULTIMEDIA (re0_vlan35) -> v4: 192.168.130.1/24
v6/t6: 2a00:XXXX:1efc:6d82:20d:b9ff:fe33:9214/64
NETADMIN (re0_vlan32) -> v4: 192.168.128.1/24
v6/t6: 2a00:XXXX:1efc:6d80:20d:b9ff:fe33:9214/64
WAN (re0_vlan30) -> v4: 192.168.178.18/24
v6/t6: 2a00:XXXX:1efc:6db2:20d:b9ff:fe33:9214/64
WAN_DG (re2) -> v4/DHCP4: 100.71.250.118/18
v6/DHCP6: 2a00:XXXX:1000:e:b4a1:db10:b480:977e/128
WLAN (re0_vlan31) -> v4: 192.168.180.1/24
v6/t6: 2a00:XXXX:1efc:6db4:20d:b9ff:fe33:9214/64
WLANGAST (re0_vlan33) -> v4: 10.255.227.1/24
I have already updated my rules regarding the ICMP changes.
LAN had IPv6 only until i changed the default Gateway to the Router of the DSL link.
The network WLAN has v4(DSL)+v6(Fibre) Internet. WLANGAST and MULTIMEDIA only via IPv6.
The ruleset of WLAN and MULTIMEDIA are nearly the same. I don't understand why WLAN works and MULTIMEDIA not.
IOT doesn't need Internet Access and i have not yet checked it.
I use hybrid outgoing NAT.
I don't use the multiWAN feature for automatic gateway switching, because the DSL link is too slow. My preffered link is the fibre link.
I think problem relies to the apinger, but i'm not sure.
I had the same problem as i tried the 18.1r1 two weeks ago, but i thought it was a beta problem and didn't had the time to debug. As i switched back to 17.7 my configuration worked fine again.
@tgurr: I don't think it is a PPPoE Problem. As you can see i have a DSL Router that gives me a private Ethernet istead of PPPoE to the opnsense and ithink we are experiencing the same problems.
Thanks for your support.