Messages

1

17.7 Legacy Series / PC Usage monitor and Quotas

« on: December 05, 2017, 09:22:54 am »

Hello,
We are being asked by clients for reports that show PC usage by day, week month and also to be able to set maximum Daily, weekly, monthly quotas to PCs or groups of PCs.
Have previously supplied Gargoyle which has the right features but is not ideal for larger networks.

can anyone suggest the correct plugin for this?

Regards
Stewart

2

17.7 Legacy Series / Re: Slow to pass data after startup

« on: December 05, 2017, 09:20:43 am »

Hi Bart,
Yes that is what I was doing, I am not trying to find out when it is up but rather why it is not up for at least 10 minutes after the software is responsive and I can do a Wan ping test immediately from the wan diagnostics.

It is like the NAT function has a delay and i need to ascertain why and how to decrease the delay.

Regards
Stewart

3

17.7 Legacy Series / Re: Slow to pass data after startup

« on: November 30, 2017, 09:06:41 am »

Opps sorry yes 4 gigs.
This is our first installation it is on deafults so would need some help as to what we should pare off.

With respect to the Free BSD we can see that load relatively quickly.
We can then login to OPNsense immediately after that.
We can go to the Wan diagnostics and Ping the internet without problem.

The issue we are facing is we need to wait over 15 minutes for any of the workstations on the lan to have access to the internet. Then suddenly everything is back to normal.
Are there any logs that may assist in identifying what event causes the connection to be re established as that may point us to the cause of the delay?

Thanks for any help.
Stewart

4

17.7 Legacy Series / Slow to pass data after startup

« on: November 29, 2017, 11:18:44 am »

Hello we are brand new to OPNsense but initially like the performance.
The hardware we are using is a Dell 380 with 4 megs of Ram.
After a power cycle the OPNsense takes less than 60 seconds to load and we can acess the web admin from another PC.
We are then experiencing approx 10 - 15 minutes of delay before any traffic can pass from the lan to the wan port.
If we perform wan diagnostics we can ping the internet OK.
It is almost like the NAT or firewall has a timed feature that we are not aware of.
Please can you assist us in speeding up the time it takes for the device to come fully online as the long wait after a power cycle is a little disconcerting.

OPNsense 17.7.5-amd64
FreeBSD 11.0-RELEASE-p12
OpenSSL 1.0.2l 25 May 2017

Thanks
Stewart