1
17.1 Legacy Series / Re: install seems to not complete totally
« on: April 06, 2017, 12:25:38 am »
ok updated it and i was able to log into it from the actual console, but now this error is present that was not present
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
17.1 Legacy Series / Re: install seems to not complete totally
« on: April 05, 2017, 10:24:51 pm »
performing this right now ,
will keep you updated
will keep you updated
3
17.1 Legacy Series / Re: install seems to not complete totally
« on: April 05, 2017, 05:51:36 pm »
ok i logged in via ssh, used option 12 and it did not update says system is still 16.7
4
17.1 Legacy Series / Re: install seems to not complete totally
« on: April 05, 2017, 03:25:27 pm »
i can try that but when i try to upgrade it says perform it from console by using option #12 but i cant get tot he console because there is no login from the console..
i can get in through the web GUI but when i try to updates says no updates but clearly shows 17.1.4 there as being a update available but not letting me get it
i can get in through the web GUI but when i try to updates says no updates but clearly shows 17.1.4 there as being a update available but not letting me get it
5
17.1 Legacy Series / Re: install seems to not complete totally
« on: April 05, 2017, 03:45:30 am »
so here is an update
went ahead and installed 16.7 and went off with out a hitch,
the lgin screen was there and all was well then i updated some packages and low and behold while on 16.7 it is having the same effect as 17.1.4 is i no longer have a login at the console of the machine, it was working just fine
but now the console reads
16.7.14_2
so i am lost
went ahead and installed 16.7 and went off with out a hitch,
the lgin screen was there and all was well then i updated some packages and low and behold while on 16.7 it is having the same effect as 17.1.4 is i no longer have a login at the console of the machine, it was working just fine
but now the console reads
16.7.14_2
so i am lost
6
17.1 Legacy Series / Re: install seems to not complete totally
« on: April 05, 2017, 02:34:13 am »
and yes i am running 17.1.4 i have down loaded them several times and same results on all
could it be that i am using a video card also ?? this tower does not have a vga port so i had to install a video card becuase it is a dell XPS system and they all have video cards installed
could it be that i am using a video card also ?? this tower does not have a vga port so i had to install a video card becuase it is a dell XPS system and they all have video cards installed
7
17.1 Legacy Series / Re: install seems to not complete totally
« on: April 05, 2017, 02:32:06 am »
yes this is directly connected to a monitor
i have used the iso for the following with the same results
vga
serial
cdrom
all have the same effect, i did manage to get logged in from a laptop i connected to the switch and it is running in live which made me look more
and i see a error when the comnands are scrolling
says consol com console errors or something like that it was scrolling way to fast to see,
i also looked in the install direction on here and i am never promted to have any install on any hard drive which would indicate i am runninng live
i have used the iso for the following with the same results
vga
serial
cdrom
all have the same effect, i did manage to get logged in from a laptop i connected to the switch and it is running in live which made me look more
and i see a error when the comnands are scrolling
says consol com console errors or something like that it was scrolling way to fast to see,
i also looked in the install direction on here and i am never promted to have any install on any hard drive which would indicate i am runninng live
8
17.1 Legacy Series / Re: install seems to not complete totally
« on: April 04, 2017, 11:03:55 pm »
nothing at all, and after it gets to that point i hear some beeps go off on the machine and seems like he whole thing is locked up
9
17.1 Legacy Series / install seems to not complete totally
« on: April 04, 2017, 10:38:27 pm »
i have downloaded 17.1 3 separate time, and used rufus three seperate time on three separate usb drive, and it complete just fine, i install opnsens and this is the end result does not seem to finish loading
does not seem to finish the loading process and this has done this 3 different times,
system is a
Dell desktop with 4 gb ram
x64 proc
does not seem to finish the loading process and this has done this 3 different times,
system is a
Dell desktop with 4 gb ram
x64 proc
Pages: [1]