Messages

1

17.1 Legacy Series / Re: Step for installation on APU2C4 & mSATA

« on: March 20, 2017, 01:53:54 pm »

Hi all,
I left the boot from USB and instead used this adapter to write a nano release on mSATA (directly from my windows pc):
https://www.amazon.it/dp/B00K1FEYAG/ref=pe_386201_124256341_TE_dp_1

By doing so, all OK! after 2 minutes.
Thank you all for the support :-)

2

17.1 Legacy Series / Re: Step for installation on APU2C4 & mSATA

« on: March 20, 2017, 11:46:55 am »

Hi Franco, tnx for your post:
Currently I have no old usb ... I try it I'll find one.
I was thinking of buying a mSATA adapter to connect to my Windows PC to make all while avoiding the USB on APU... I do not know well how to do it, I'm going to read me something and then I update you.

TNX

3

17.1 Legacy Series / Re: Step for installation on APU2C4 & mSATA

« on: March 20, 2017, 10:18:48 am »

Hi Alphabet Soup, tnx for reply.
I followed the steps and the system tells OK ... but after the boot command, the result is always the same (error 19) :-(

4

17.1 Legacy Series / Re: Step for installation on APU2C4 & mSATA

« on: March 19, 2017, 01:32:54 pm »

Any ideas or suggestions?

5

17.1 Legacy Series / Re: Step for installation on APU2C4 & mSATA

« on: March 18, 2017, 07:52:49 pm »

I am looking in the forum I found this:
https://forum.opnsense.org/index.php?topic=4507.msg17226#msg17226

but does not it help me...

6

17.1 Legacy Series / Re: Step for installation on APU2C4 & mSATA

« on: March 18, 2017, 07:44:06 pm »

When I boot from USB on my APU, I see the attached photo...

7

17.1 Legacy Series / [SOLVED] Step for installation on APU2C4 & mSATA

« on: March 18, 2017, 05:47:33 pm »

Hi ALL,
I need help to make an installation;
I have the hardware in the topic and a Windows 10 machine, without mSATA adapter;

Can I install OPNSense via serial port?
or
Can prepare on the windows 10 pc a usb key and then start it on my APU system, saying to install on the mSATA drive?

Thanks for your help