Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Pimmal

#1
17.1 Legacy Series / Re: DHCP CARP issue
March 11, 2017, 07:18:35 PM
keiner da der helfen kann?
#2
German - Deutsch / DHCP CARP Problem
March 01, 2017, 01:15:26 AM
Hi Leute, habe das Problem dass der DHCP nur noch IP´s an fest eingetragene Clients verteilt. Im Log steht das hier: peer holds all free leases

Jetzt habe ich gesehen dass der CARP Status komisch aussieht und sich auch ned ändert.
Master OPNSense:
My State recover Peer State unknown-state
Second OPNSense
My State communications-interrupted Peer State normal
#3
17.1 Legacy Series / DHCP CARP issue
February 25, 2017, 09:34:10 PM
I have a little issue, my dhcp is not giving out any ip adresses, he is talking always: peer holds all free leases

now i have found on the leases page following states, and they are not changing since hours.
Master OPNSense:
My State recover Peer State unknown-state
Second OPNSense
My State communications-interrupted Peer State normal
#4
German - Deutsch / Re: OPNsense ist der Wahnsinn
February 19, 2017, 11:44:13 PM
Also mein Grund zu OPNSense zu wechseln war dass PfSense im HA mit Limittern abschmiert. (Bug)
Quote from: JeGr on February 13, 2017, 01:42:28 PM
Ahoi und Grüße!

Da ich momentan beides nutze, frage ich mich: was funktioniert denn so viel viel besser als vorher!? Für die meisten normalen Anwendungsfälle hatte ich bislang kaum großartige Unterschiede, was keinesfalls schlecht ist, aber auch nicht diesen Überschwang hervorrufen dürfte ;)
#5
17.1 Legacy Series / Re: [Solved] Multi WAN Problem
February 10, 2017, 05:24:44 PM
For me it was solved, because on my side in the config were marked sticky connections.
#6
17.1 Legacy Series / Very High CPU load
February 10, 2017, 04:01:24 PM
I have very high cpu load.
   0   root   -92   -   0K   368K   CPU0   0   26:55   65.58%   [kernel{em0 taskq}]
   11   root   155   ki31   0K   64K   RUN   2   796:19   34.18%   [idle{idle: cpu2}]
   12   root   -92   -   0K   768K   WAIT   2   12:53   19.29%   [intr{irq17: em3 em7 m}]

Does anybody know why? The system is horrible slow.

Load average    4.28, 3.42, 2.99
#7
17.1 Legacy Series / Re: Multi WAN Problem
February 09, 2017, 10:30:56 PM
Was a config Problem "sticky connections"
#8
17.1 Legacy Series / Re: Multi WAN Problem
February 09, 2017, 08:15:08 PM
Was working on 16.7.14 i try now a clean install and will report here again after configuring.
#9
17.1 Legacy Series / Re: Multi WAN Problem
February 09, 2017, 05:36:15 PM
Problem still persists on 17.1-1 and i have another problem form time to time https sites are not loading in case of tehy have the certificate from the web configurator.
#10
17.1 Legacy Series / [Solved] Multi WAN Problem
February 06, 2017, 11:03:26 PM
I have installed 17.1 and now multi wan is not working.
I have one DSL line and one LTE line.
In the systemd efault gateway is DSL and always the traffic is routed over DSL gateway.
If i set in firewall for the * all rule gateway LTE then the traffic is again routed over DSL gateway.
WHY???
#11
Also ich muss dazu sagen es geht bei jedem Hotspot mit meinem Handy.
Vor dem Wechsel zu OPNSense ging es auch astrein mit PfSense von daher kann das nicht am Handy liegen.

Das HTTP / HTTPS Problem sollte auch am OPNSense liegen und nicht am Handy weil wenn ich im Captivate Portal ein SSL Zertifikat einstelle dann komme ich über HTTPS Seiten aufs Login Portal aber dafür HTTP nicht mehr.
#12
Hi Leute,

habe das Captivate Protal nun bei mir im Einsatz und das Problem ist man geht ins WLAN und es passiert nix.

Desweiteren kommt keine Meldung wenn man mit dem Handy ins WLAN geht, erst wenn man eine HTTP Seite aufruft. IN den ganzen Public WLAN´s kommmt schon beim rein gehen ins WLAN sie müssen sich im Netzwerk anmelden.

Ruft man eine HTTPS Seite auf timeout.
Ruft man eine HTTP Seite auf redirekt zum Portal.


Wo liegt der Fehler bei mir?
#13
German - Deutsch / Re: Zugang zum Webinterface des Modems
December 31, 2016, 02:12:52 AM
Hi,
also bei mir hängt ein Router davor und wenn man in der Firewall nix blockt komme ich aufs Router Webinterface drauf.
#14
German - Deutsch / QoS
December 30, 2016, 08:36:47 PM
Hi,
habe auch noch ein Problem wie kann ich QoS hier handeln?
Habe für den Traffic schon Queues und Pipes angelegt aber wie kann ich priorisieren welche Pakete priorität haben? (z.B. Gametraffic vor Webtraffic usw)
Die OPNSense Anleitung läßt einen da ein wenig im Regen stehen.
#15
German - Deutsch / Proxy traffic
December 30, 2016, 08:16:05 PM
Hi,
habe den Proxy soweit am laufen, nun habe ich das Problem dass mir bei der Traffic Anzeige der Traffic des Proxy´s nicht angezeigt wird. Kann hier wer helfen?