Messages

1

16.7 Legacy Series / Re: USB Installation Problem (IO Read Error)

« on: August 27, 2016, 09:55:27 am »

I now have tried a different USB Stick, and a different USB Port on the PC i create the Installation Media with because i noticed that the USB Port previously used was a USB3 (which was not blue, thats why i forgot).

So after the following two changes, now it works as intended!
1) Used different USB Port during Installation Media Creation
2) Used different USB Stick

Thanks!
(Do i need to close the topic?)

2

16.7 Legacy Series / Re: USB Installation Problem (IO Read Error)

« on: August 19, 2016, 10:04:01 pm »

I used an USB 2.0 Usb-Stick connected to a USB 2.0 Port as far as i see. But i can try a different USB Stick, let's see if that changes anything.

3

16.7 Legacy Series / [SOLVED] USB Installation Problem (IO Read Error)

« on: August 11, 2016, 07:23:42 pm »

Dear Forum,

i tried installing OPNsense via USB Stick, prepared via dd as described, and the boot process (even before installation option is given) hangs on an error which spams the screen, please see attached foto for details. Sadly, the lines appear so fast that i cant read exactly what happens previosuly to the error.

I tried on a different pc with different hardware aswell, same result. I checked the md5 checksum of the download which is correct.

(I needed to reduce the image quality a lot to be able to upload it. Anyhow, note that the lower lines seem to overlap because either my monitor or camera could not keep up with how fast the lines moved.)

Any Suggestions?