Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - mbosner

Pages 1 2 3
#31
16.7 Legacy Series / Re: Zotac nano ci323 LAN Drops after a few days
January 05, 2017, 09:24:28 PM
Hi Franco,

windows is not an option ;)

I already ordered this box with intel nics: http://www.shuttle.eu/products/slim/ds68u/

Would you be able to debug the problem if i send you the hardware? Or maybe someone else?

Cheers
Martin

Quote from: franco on January 05, 2017, 04:35:30 PM
Ok, let me rephrase: re(4) drivers on BSD are difficult. I checked the source code for fixes in newer versions and did not find a single one. This is not going to be fixed. ;(
#32
16.7 Legacy Series / Re: Zotac nano ci323 LAN Drops after a few days
January 04, 2017, 10:48:13 PM
Hi franco,

thank you for the reply.

Since the box does not have any extension capabilities it will be hard to replace the nics (usb would be possible).

To replicate the failure you just need to push about 30mb/s (megabyte) and starting at about 20 gig overall traffic one or both nics fail. dmesg tells you that they eventually come up again but the do not forward any traffic after the first failure.

Disabling the acceleration helps - even if you do not use the feature e.g.:

If i disable vlan hw acceleration in the options it only disables the hw feature on my lan side (i only use vlans on my lan side - it might be a bug but i did not test vlan on the wan side). If i disable the acceleration manually it takes much more time and traffic before the nics fail.

Btw. using windows as os (just test installation) the nics do not fail even under much heavier load.

If it helps to grant access to the box for debuging purpose i can add your public key next week (i wont make it earlier).

Cheers
Martin
#33
16.7 Legacy Series / Re: Zotac nano ci323 LAN Drops after a few days
January 04, 2017, 02:46:57 PM
Same here - afaik a known issue. Disabling all HW acceleration helps extending the time before failure.
#34
16.7 Legacy Series / Re: IPv6 DualStack problems
December 27, 2016, 06:01:13 PM
In the meantime i have some questions:

Where can i "see" the "track interface" implementation to debug the mechanism?

How can i get more debug information of the PPPoE and DHCPv6 process ? Even with the debug flag activated it is pretty reticent ...

How can i manually reconnect the pppoe connection in the cli ?

Thank you!
#35
16.7 Legacy Series / IPv6 DualStack problems
December 27, 2016, 06:17:38 AM
Hello,

i already posted in the 17.1 beta thread but it seems that i have a very special ISP configuration and reinstalled 16.7 latest to avoid beta problems.

Provider is wilhelm.tel/willy.tel

My scenario

  • ipv4 over pppoe works very well
  • my provider only supports a locallink address for IPv6 routing
  • i need DHCPv6 Rapid Commit (any idea what that is?)
  • i can ping the ISP ipv6 gateway from the router
  • i do not get a prefix (afaik) and my lan interface does not announce a ipv6 prefix
  • opnsense needs to use a ip address from the assigned prefix
  • opnsense must ask for a prefix

My current WAN config (yes/no means i tried both)
IPv4 Configuration Type   PPPoE
IPv6 Configuration Type   DHCPv6
Enable debug yes
Use IPv4 connectivity   yes/no
Request only a IPv6 prefix yes/no
Directly send SOLICIT yes/no
DHCPv6 Prefix Delegation size   56 
Send IPv6 prefix hint   yes/no

ping6 gateway
Code Select

ping6 fe80::aa9d:21ff:fee1:7f00
PING6(56=40+8+8 bytes) fe80::201:2eff:fe6e:ff07%pppoe0 --> fe80::aa9d:21ff:fee1:7f00
16 bytes from fe80::aa9d:21ff:fee1:7f00%pppoe0, icmp_seq=0 hlim=64 time=0.989 ms
16 bytes from fe80::aa9d:21ff:fee1:7f00%pppoe0, icmp_seq=1 hlim=64 time=0.841 ms
16 bytes from fe80::aa9d:21ff:fee1:7f00%pppoe0, icmp_seq=2 hlim=64 time=1.011 ms


network config
Code Select

re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 00:01:2e:6e:ff:07
inet 192.168.40.1 netmask 0xffffff00 broadcast 192.168.40.255
inet6 fe80::1:1%re0 prefixlen 64 scopeid 0x1
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 00:01:2e:6e:ff:08
inet6 fe80::201:2eff:fe6e:ff08%re1 prefixlen 64 scopeid 0x2
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex,master>)
status: active
pflog0: flags=100<PROMISC> metric 0 mtu 33160
pfsync0: flags=0<> metric 0 mtu 1500
syncpeer: 0.0.0.0 maxupd: 128 defer: off
enc0: flags=0<> metric 0 mtu 1536
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
inet6 fe80::201:2eff:fe6e:ff07%pppoe0 prefixlen 64 scopeid 0x7
inet 46.59.218.34 --> 84.46.104.215 netmask 0xffffffff
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>


Any idea whats wrong with my setup?
#36
17.1 Legacy Series / Re: Problems with PPPoE and Dual Stack (missing ipv6 in lan)
December 27, 2016, 05:31:49 AM
i just tested opnsense 16.7 and latest stable pfsense - same problem.

I am now back on 16.7 latest and will aggregate all informations about my ISP.
#37
17.1 Legacy Series / Re: Problems with PPPoE and Dual Stack (missing ipv6 in lan)
December 27, 2016, 12:50:39 AM
How do i know what i (can) get from my isp ? Maybe i need to have a better understanding of IPv6 over DHCPv6. I thought that i should get the prefix from my ISP (at least /64) but how do i know which prefix i might expect or where can i see the offered prefix (in case that i do not need to send a prefix hint)?

The only thing i see in the ppp log is:

Code Select

Dec 26 22:59:23 opnsense ppp: [wan] IPV6CP: rec'd Configure Ack #1 (Ack-Sent)
Dec 26 22:59:23 opnsense ppp: [wan] IPV6CP: state change Ack-Sent --> Opened
Dec 26 22:59:23 opnsense ppp: [wan] IPV6CP: LayerUp
Dec 26 22:59:23 opnsense ppp: [wan]   0201:2eff:fe6e:ff08 -> 76a0:2fff:fe56:aa00


and from the syslog:

Code Select

Dec 27 00:37:27 opnsense opnsense: /usr/local/etc/rc.newwanip: ROUTING: setting IPv4 default route to 84.46.104.218
Dec 27 00:37:27 opnsense opnsense: /usr/local/etc/rc.newwanip: ROUTING: setting IPv6 default route to fe80::76a0:2fff:fe56:aa00%pppoe0
Dec 27 00:37:27 opnsense opnsense: /usr/local/etc/rc.newwanip: The command '/sbin/route delete -inet6 'default' 'fe80::76a0:2fff:fe56:aa00%pppoe0'' returned exit code '1', the output was 'route: route has not been found delete net default: gateway fe80::76a0:2fff:fe56:aa00%pppoe0 fib 0: not in table'


It seems that my old fritz.box used a /56 prefix - so i will continue with that size.
#38
17.1 Legacy Series / Re: Problems with PPPoE and Dual Stack (missing ipv6 in lan)
December 26, 2016, 10:56:31 PM
Second part of the results:

With "use IPv4 connectivity" and "Send IPv6 prefix hint" still another IPv6 ll address on the pppoe connection but no public ipv6 on the lan interface (still set to "track interface 'wan'"):

Code Select

ifconfig
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 00:01:2e:6e:ff:07
inet6 fe80::201:2eff:fe6e:ff07%re0 prefixlen 64 scopeid 0x1
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 00:01:2e:6e:ff:08
inet 192.168.40.1 netmask 0xffffff00 broadcast 192.168.40.255
inet6 fe80::1:1%re1 prefixlen 64 scopeid 0x2
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
inet6 fe80::201:2eff:fe6e:ff07%pppoe0 prefixlen 64 scopeid 0x7
inet6 fe80::201:2eff:fe6e:ff08%pppoe0 prefixlen 64 scopeid 0x7
inet 46.59.131.204 --> 84.46.104.216  netmask 0xffffffff
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>



and the pppoe log:

Code Select

PPPoE: rec'd ACNAME "ASR-POP101"
[wan_link0] PPPoE: connection successful
[wan_link0] Link: UP event
[wan_link0] LCP: Up event
[wan_link0] LCP: state change Starting --> Req-Sent
[wan_link0] LCP: SendConfigReq #1
[wan_link0]   PROTOCOMP
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0xadfc5708
[wan_link0] LCP: rec'd Configure Reject #1 (Req-Sent)
[wan_link0]   PROTOCOMP
[wan_link0] LCP: SendConfigReq #2
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0xadfc5708
[wan_link0] LCP: rec'd Configure Ack #2 (Req-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0xadfc5708
[wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
[wan_link0] LCP: state change Ack-Rcvd --> Req-Sent
[wan_link0] LCP: SendConfigReq #3
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0xadfc5708
[wan_link0] LCP: rec'd Configure Ack #3 (Req-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0xadfc5708
[wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
[wan_link0] LCP: rec'd Configure Request #2 (Ack-Rcvd)
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x562949e1
[wan_link0] LCP: SendConfigAck #2
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x562949e1
[wan_link0] LCP: state change Ack-Rcvd --> Opened
[wan_link0] LCP: auth: peer wants PAP, I want nothing
[wan_link0] PAP: using authname "usernamexyz"
[wan_link0] PAP: sending REQUEST #1 len: 23
[wan_link0] LCP: LayerUp
[wan_link0] LCP: rec'd Configure Request #1 (Opened)
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x64dcf1f1
[wan_link0] LCP: LayerDown
[wan_link0] LCP: SendConfigReq #4
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0xadfc5708
[wan_link0] LCP: SendConfigAck #1
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x64dcf1f1
[wan_link0] LCP: state change Opened --> Ack-Sent
[wan_link0] LCP: rec'd Configure Ack #4 (Ack-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0xadfc5708
[wan_link0] LCP: state change Ack-Sent --> Opened
[wan_link0] LCP: auth: peer wants PAP, I want nothing
[wan_link0] PAP: using authname "usernamexyz"
[wan_link0] PAP: sending REQUEST #1 len: 23
[wan_link0] LCP: LayerUp
[wan_link0] PAP: rec'd ACK #1 len: 40
[wan_link0]   MESG: Welcome to wilhelm.tel BRAS-Service
[wan_link0] LCP: authorization successful
[wan_link0] Link: Matched action 'bundle "wan" ""'
[wan_link0] Link: Join bundle "wan"
[wan] Bundle: Status update: up 1 link, total bandwidth 64000 bps
[wan] IPCP: Open event
[wan] IPCP: state change Initial --> Starting
[wan] IPCP: LayerStart
[wan] IPV6CP: Open event
[wan] IPV6CP: state change Initial --> Starting
[wan] IPV6CP: LayerStart
[wan] IPCP: Up event
[wan] IPCP: state change Starting --> Req-Sent
[wan] IPCP: SendConfigReq #1
[wan]   IPADDR 0.0.0.0
[wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[wan]   PRIDNS 0.0.0.0
[wan]   SECDNS 0.0.0.0
[wan] IPV6CP: Up event
[wan] IPV6CP: state change Starting --> Req-Sent
[wan] IPV6CP: SendConfigReq #1
[wan] IPV6CP: rec'd Configure Request #1 (Req-Sent)
[wan] IPV6CP: SendConfigAck #1
[wan] IPV6CP: state change Req-Sent --> Ack-Sent
[wan] IPCP: rec'd Configure Request #1 (Req-Sent)
[wan]   IPADDR 84.46.104.216
[wan]     84.46.104.216 is OK
[wan] IPCP: SendConfigAck #1
[wan]   IPADDR 84.46.104.216
[wan] IPCP: state change Req-Sent --> Ack-Sent
[wan] IPCP: rec'd Configure Reject #1 (Ack-Sent)
[wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[wan] IPCP: SendConfigReq #2
[wan]   IPADDR 0.0.0.0
[wan]   PRIDNS 0.0.0.0
[wan]   SECDNS 0.0.0.0
[wan] IPV6CP: rec'd Configure Ack #1 (Ack-Sent)
[wan] IPV6CP: state change Ack-Sent --> Opened
[wan] IPV6CP: LayerUp
[wan]   0201:2eff:fe6e:ff08 -> aa9d:21ff:fea5:7b00
[wan] IFACE: Up event
[wan] IFACE: Rename interface ng0 to pppoe0
[wan] IPCP: rec'd Configure Nak #2 (Ack-Sent)
[wan]   IPADDR 46.59.131.204
[wan]     46.59.131.204 is OK
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: SendConfigReq #3
[wan]   IPADDR 46.59.131.204
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: rec'd Configure Ack #3 (Ack-Sent)
[wan]   IPADDR 46.59.131.204
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: state change Ack-Sent --> Opened
[wan] IPCP: LayerUp
[wan]   46.59.131.204 -> 84.46.104.216


And if i set the config only to "Send IPv6 prefix hint" i only have on IPv6 on the pppoe interface and still no public ipv6:

Code Select

ifconfig
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 00:01:2e:6e:ff:07
inet6 fe80::201:2eff:fe6e:ff07%re0 prefixlen 64 scopeid 0x1
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 00:01:2e:6e:ff:08
inet 192.168.40.1 netmask 0xffffff00 broadcast 192.168.40.255
inet6 fe80::1:1%re1 prefixlen 64 scopeid 0x2
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
inet6 fe80::201:2eff:fe6e:ff08%pppoe0 prefixlen 64 scopeid 0x7
inet 46.59.151.229 --> 84.46.104.216  netmask 0xffffffff
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>


Code Select

PPPoE: rec'd ACNAME "ASR-POP101"
[wan_link0] PPPoE: connection successful
[wan_link0] Link: UP event
[wan_link0] LCP: Up event
[wan_link0] LCP: state change Starting --> Req-Sent
[wan_link0] LCP: SendConfigReq #1
[wan_link0]   PROTOCOMP
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x4dcb5d12
[wan_link0] LCP: rec'd Configure Reject #1 (Req-Sent)
[wan_link0]   PROTOCOMP
[wan_link0] LCP: SendConfigReq #2
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x4dcb5d12
[wan_link0] LCP: rec'd Configure Ack #2 (Req-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x4dcb5d12
[wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
[wan_link0] LCP: state change Ack-Rcvd --> Req-Sent
[wan_link0] LCP: SendConfigReq #3
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x4dcb5d12
[wan_link0] LCP: rec'd Configure Ack #3 (Req-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x4dcb5d12
[wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
[wan_link0] LCP: rec'd Configure Request #2 (Ack-Rcvd)
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x2a10c9f3
[wan_link0] LCP: SendConfigAck #2
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x2a10c9f3
[wan_link0] LCP: state change Ack-Rcvd --> Opened
[wan_link0] LCP: auth: peer wants PAP, I want nothing
[wan_link0] PAP: using authname "usernamexyz"
[wan_link0] PAP: sending REQUEST #1 len: 23
[wan_link0] LCP: LayerUp
[wan_link0] LCP: rec'd Configure Request #1 (Opened)
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x64dfb86a
[wan_link0] LCP: LayerDown
[wan_link0] LCP: SendConfigReq #4
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x4dcb5d12
[wan_link0] LCP: SendConfigAck #1
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x64dfb86a
[wan_link0] LCP: state change Opened --> Ack-Sent
[wan_link0] LCP: rec'd Configure Ack #4 (Ack-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x4dcb5d12
[wan_link0] LCP: state change Ack-Sent --> Opened
[wan_link0] LCP: auth: peer wants PAP, I want nothing
[wan_link0] PAP: using authname "usernamexyz"
[wan_link0] PAP: sending REQUEST #1 len: 23
[wan_link0] LCP: LayerUp
[wan_link0] rec'd proto IPCP during authenticate phase
[wan_link0] PAP: rec'd ACK #1 len: 40
[wan_link0]   MESG: Welcome to wilhelm.tel BRAS-Service
[wan_link0] LCP: authorization successful
[wan_link0] Link: Matched action 'bundle "wan" ""'
[wan_link0] Link: Join bundle "wan"
[wan] Bundle: Status update: up 1 link, total bandwidth 64000 bps
[wan] IPCP: Open event
[wan] IPCP: state change Initial --> Starting
[wan] IPCP: LayerStart
[wan] IPV6CP: Open event
[wan] IPV6CP: state change Initial --> Starting
[wan] IPV6CP: LayerStart
[wan] IPCP: Up event
[wan] IPCP: state change Starting --> Req-Sent
[wan] IPCP: SendConfigReq #1
[wan]   IPADDR 0.0.0.0
[wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[wan]   PRIDNS 0.0.0.0
[wan]   SECDNS 0.0.0.0
[wan] IPV6CP: Up event
[wan] IPV6CP: state change Starting --> Req-Sent
[wan] IPV6CP: SendConfigReq #1
[wan] IPV6CP: rec'd Configure Request #1 (Req-Sent)
[wan] IPV6CP: SendConfigAck #1
[wan] IPV6CP: state change Req-Sent --> Ack-Sent
[wan] IPCP: rec'd Configure Reject #1 (Req-Sent)
[wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[wan] IPCP: SendConfigReq #2
[wan]   IPADDR 0.0.0.0
[wan]   PRIDNS 0.0.0.0
[wan]   SECDNS 0.0.0.0
[wan] IPV6CP: rec'd Configure Ack #1 (Ack-Sent)
[wan] IPV6CP: state change Ack-Sent --> Opened
[wan] IPV6CP: LayerUp
[wan]   0201:2eff:fe6e:ff08 -> aa9d:21ff:fea5:7b00
[wan] IFACE: Up event
[wan] IFACE: Rename interface ng0 to pppoe0
[wan] IPCP: rec'd Configure Nak #2 (Req-Sent)
[wan]   IPADDR 46.59.151.229
[wan]     46.59.151.229 is OK
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: SendConfigReq #3
[wan]   IPADDR 46.59.151.229
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: rec'd Configure Ack #3 (Req-Sent)
[wan]   IPADDR 46.59.151.229
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: state change Req-Sent --> Ack-Rcvd
[wan] IPCP: rec'd Configure Request #2 (Ack-Rcvd)
[wan]   IPADDR 84.46.104.216
[wan]     84.46.104.216 is OK
[wan] IPCP: SendConfigAck #2
[wan]   IPADDR 84.46.104.216
[wan] IPCP: state change Ack-Rcvd --> Opened
[wan] IPCP: LayerUp
[wan]   46.59.151.229 -> 84.46.104.216
#39
17.1 Legacy Series / Re: Problems with PPPoE and Dual Stack (missing ipv6 in lan)
December 26, 2016, 10:56:02 PM
I tried a /64 prefix for now (that should always work, shouldnt it?)

Just tried all configurations.

Without any further flags:
Code Select

PPPoE: rec'd ACNAME "ASR-POP101"
[wan_link0] PPPoE: connection successful
[wan_link0] Link: UP event
[wan_link0] LCP: Up event
[wan_link0] LCP: state change Starting --> Req-Sent
[wan_link0] LCP: SendConfigReq #1
[wan_link0]   PROTOCOMP
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x9276f820
[wan_link0] LCP: rec'd Configure Reject #1 (Req-Sent)
[wan_link0]   PROTOCOMP
[wan_link0] LCP: SendConfigReq #2
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x9276f820
[wan_link0] LCP: rec'd Configure Ack #2 (Req-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x9276f820
[wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
[wan_link0] LCP: state change Ack-Rcvd --> Req-Sent
[wan_link0] LCP: SendConfigReq #3
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x9276f820
[wan_link0] LCP: rec'd Configure Ack #3 (Req-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x9276f820
[wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
[wan_link0] LCP: rec'd Configure Request #2 (Ack-Rcvd)
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x4a51bce9
[wan_link0] LCP: SendConfigAck #2
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x4a51bce9
[wan_link0] LCP: state change Ack-Rcvd --> Opened
[wan_link0] LCP: auth: peer wants PAP, I want nothing
[wan_link0] PAP: using authname "usernamexyz"
[wan_link0] PAP: sending REQUEST #1 len: 23
[wan_link0] LCP: LayerUp
[wan_link0] LCP: rec'd Configure Request #1 (Opened)
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x64d6494e
[wan_link0] LCP: LayerDown
[wan_link0] LCP: SendConfigReq #4
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x9276f820
[wan_link0] LCP: SendConfigAck #1
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x64d6494e
[wan_link0] LCP: state change Opened --> Ack-Sent
[wan_link0] LCP: rec'd Configure Ack #4 (Ack-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x9276f820
[wan_link0] LCP: state change Ack-Sent --> Opened
[wan_link0] LCP: auth: peer wants PAP, I want nothing
[wan_link0] PAP: using authname "usernamexyz"
[wan_link0] PAP: sending REQUEST #1 len: 23
[wan_link0] LCP: LayerUp
[wan_link0] PAP: rec'd ACK #1 len: 40
[wan_link0]   MESG: Welcome to wilhelm.tel BRAS-Service
[wan_link0] LCP: authorization successful
[wan_link0] Link: Matched action 'bundle "wan" ""'
[wan_link0] Link: Join bundle "wan"
[wan] Bundle: Status update: up 1 link, total bandwidth 64000 bps
[wan] IPCP: Open event
[wan] IPCP: state change Initial --> Starting
[wan] IPCP: LayerStart
[wan] IPV6CP: Open event
[wan] IPV6CP: state change Initial --> Starting
[wan] IPV6CP: LayerStart
[wan] IPCP: Up event
[wan] IPCP: state change Starting --> Req-Sent
[wan] IPCP: SendConfigReq #1
[wan]   IPADDR 0.0.0.0
[wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[wan]   PRIDNS 0.0.0.0
[wan]   SECDNS 0.0.0.0
[wan] IPV6CP: Up event
[wan] IPV6CP: state change Starting --> Req-Sent
[wan] IPV6CP: SendConfigReq #1
[wan] IPV6CP: rec'd Configure Request #1 (Req-Sent)
[wan] IPV6CP: SendConfigAck #1
[wan] IPV6CP: state change Req-Sent --> Ack-Sent
[wan] IPCP: rec'd Configure Request #1 (Req-Sent)
[wan]   IPADDR 84.46.104.216
[wan]     84.46.104.216 is OK
[wan] IPCP: SendConfigAck #1
[wan]   IPADDR 84.46.104.216
[wan] IPCP: state change Req-Sent --> Ack-Sent
[wan] IPV6CP: rec'd Configure Ack #1 (Ack-Sent)
[wan] IPV6CP: state change Ack-Sent --> Opened
[wan] IPV6CP: LayerUp
[wan]   0201:2eff:fe6e:ff08 -> aa9d:21ff:fea5:7b00
[wan] IFACE: Up event
[wan] IFACE: Rename interface ng0 to pppoe0
[wan] IPCP: rec'd Configure Reject #1 (Ack-Sent)
[wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[wan] IPCP: SendConfigReq #2
[wan]   IPADDR 0.0.0.0
[wan]   PRIDNS 0.0.0.0
[wan]   SECDNS 0.0.0.0
[wan] IPCP: rec'd Configure Nak #2 (Ack-Sent)
[wan]   IPADDR 46.59.157.75
[wan]     46.59.157.75 is OK
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: SendConfigReq #3
[wan]   IPADDR 46.59.157.75
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: rec'd Configure Ack #3 (Ack-Sent)
[wan]   IPADDR 46.59.157.75
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: state change Ack-Sent --> Opened
[wan] IPCP: LayerUp
[wan]   46.59.157.75 -> 84.46.104.216


With "use IPv4 connectivity" i get another ll address but still no luck on the lan interface:

Code Select

pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
inet6 fe80::201:2eff:fe6e:ff07%pppoe0 prefixlen 64 scopeid 0x7
inet6 fe80::201:2eff:fe6e:ff08%pppoe0 prefixlen 64 scopeid 0x7
inet 46.59.211.177 --> 84.46.104.215  netmask 0xffffffff
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>


Code Select

PPPoE: rec'd ACNAME "ASR-POP101"
[wan_link0] PPPoE: connection successful
[wan_link0] Link: UP event
[wan_link0] LCP: Up event
[wan_link0] LCP: state change Starting --> Req-Sent
[wan_link0] LCP: SendConfigReq #1
[wan_link0]   PROTOCOMP
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x15cd28f0
[wan_link0] LCP: rec'd Configure Reject #1 (Req-Sent)
[wan_link0]   PROTOCOMP
[wan_link0] LCP: SendConfigReq #2
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x15cd28f0
[wan_link0] LCP: rec'd Configure Ack #2 (Req-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x15cd28f0
[wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
[wan_link0] LCP: state change Ack-Rcvd --> Req-Sent
[wan_link0] LCP: SendConfigReq #3
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x15cd28f0
[wan_link0] LCP: rec'd Configure Ack #3 (Req-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x15cd28f0
[wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
[wan_link0] LCP: rec'd Configure Request #2 (Ack-Rcvd)
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x42e10b20
[wan_link0] LCP: SendConfigAck #2
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x42e10b20
[wan_link0] LCP: state change Ack-Rcvd --> Opened
[wan_link0] LCP: auth: peer wants PAP, I want nothing
[wan_link0] PAP: using authname "usernamexyz"
[wan_link0] PAP: sending REQUEST #1 len: 23
[wan_link0] LCP: LayerUp
[wan_link0] LCP: rec'd Configure Request #1 (Opened)
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x5f2da7a7
[wan_link0] LCP: LayerDown
[wan_link0] LCP: SendConfigReq #4
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x15cd28f0
[wan_link0] LCP: SendConfigAck #1
[wan_link0]   MRU 1492
[wan_link0]   AUTHPROTO PAP
[wan_link0]   MAGICNUM 0x5f2da7a7
[wan_link0] LCP: state change Opened --> Ack-Sent
[wan_link0] LCP: rec'd Configure Ack #4 (Ack-Sent)
[wan_link0]   MRU 1492
[wan_link0]   MAGICNUM 0x15cd28f0
[wan_link0] LCP: state change Ack-Sent --> Opened
[wan_link0] LCP: auth: peer wants PAP, I want nothing
[wan_link0] PAP: using authname "usernamexyz"
[wan_link0] PAP: sending REQUEST #1 len: 23
[wan_link0] LCP: LayerUp
[wan_link0] PAP: rec'd ACK #1 len: 40
[wan_link0]   MESG: Welcome to wilhelm.tel BRAS-Service
[wan_link0] LCP: authorization successful
[wan_link0] Link: Matched action 'bundle "wan" ""'
[wan_link0] Link: Join bundle "wan"
[wan] Bundle: Status update: up 1 link, total bandwidth 64000 bps
[wan] IPCP: Open event
[wan] IPCP: state change Initial --> Starting
[wan] IPCP: LayerStart
[wan] IPV6CP: Open event
[wan] IPV6CP: state change Initial --> Starting
[wan] IPV6CP: LayerStart
[wan] IPCP: Up event
[wan] IPCP: state change Starting --> Req-Sent
[wan] IPCP: SendConfigReq #1
[wan]   IPADDR 0.0.0.0
[wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[wan]   PRIDNS 0.0.0.0
[wan]   SECDNS 0.0.0.0
[wan] IPV6CP: Up event
[wan] IPV6CP: state change Starting --> Req-Sent
[wan] IPV6CP: SendConfigReq #1
[wan] IPCP: rec'd Configure Request #1 (Req-Sent)
[wan]   IPADDR 84.46.104.215
[wan]     84.46.104.215 is OK
[wan] IPCP: SendConfigAck #1
[wan]   IPADDR 84.46.104.215
[wan] IPCP: state change Req-Sent --> Ack-Sent
[wan] IPV6CP: rec'd Configure Request #1 (Req-Sent)
[wan] IPV6CP: SendConfigAck #1
[wan] IPV6CP: state change Req-Sent --> Ack-Sent
[wan] IPCP: rec'd Configure Reject #1 (Ack-Sent)
[wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[wan] IPCP: SendConfigReq #2
[wan]   IPADDR 0.0.0.0
[wan]   PRIDNS 0.0.0.0
[wan]   SECDNS 0.0.0.0
[wan] IPV6CP: rec'd Configure Ack #1 (Ack-Sent)
[wan] IPV6CP: state change Ack-Sent --> Opened
[wan] IPV6CP: LayerUp
[wan]   0201:2eff:fe6e:ff08 -> aa9d:21ff:fee1:7f00
[wan] IFACE: Up event
[wan] IFACE: Rename interface ng0 to pppoe0
[wan] IPCP: rec'd Configure Nak #2 (Ack-Sent)
[wan]   IPADDR 46.59.211.177
[wan]     46.59.211.177 is OK
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: SendConfigReq #3
[wan]   IPADDR 46.59.211.177
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: rec'd Configure Ack #3 (Ack-Sent)
[wan]   IPADDR 46.59.211.177
[wan]   PRIDNS 213.209.104.220
[wan]   SECDNS 213.209.104.250
[wan] IPCP: state change Ack-Sent --> Opened
[wan] IPCP: LayerUp
[wan]   46.59.211.177 -> 84.46.104.215
#40
17.1 Legacy Series / Problems with PPPoE and Dual Stack (missing ipv6 in lan)
December 26, 2016, 10:02:46 PM
I use 17.1 Beta on a zotac CI323 with all acceleration features disabled (https://www.zotac.com/de/product/mini_pcs/zbox-ci323-nano).

My provider requires PPPoE (via lan) for ip access. This does work very well for ipv4 with nat in my local lan.

For ipv6 my provider routes all traffic trough the ll and this seems to be a problem. I cannot get IPv6 to work:
(ll = LocalLink)

Code Select

Internet6:
Destination                       Gateway                       Flags     Netif Expire
default                           fe80::aa9d:21ff:fea5:7b00%pppoe0 UGS   pppoe0


I can ping the router of my provider. Since i only have a ll address on my router other targets do not work. For my local network i need to ask for a ipv6 prefix but i have no clue how i can configure opnsense to make sure the prefix is configured on my lan interface.

This is my current log with IPv4: PPPoE, IPv6: DHCPv6, LAN Static IPv4 with NAT, IPv6 Track Interface with Prefix ID 0:

Code Select

Dec 26 21:51:03 opnsense ppp: Multi-link PPP daemon for FreeBSD
Dec 26 21:51:03 opnsense ppp:
Dec 26 21:51:03 opnsense ppp: process 51966 started, version 5.8 (root@sensey64 12:22 13-Dec-2016)
Dec 26 21:51:03 opnsense ppp: waiting for process 93467 to die...
Dec 26 21:51:03 opnsense ppp: [wan] Bundle: Shutdown
Dec 26 21:51:03 opnsense ppp: [wan_link0] Link: Shutdown
Dec 26 21:51:03 opnsense ppp: process 93467 terminated
Dec 26 21:51:04 opnsense ppp: web: web is not running
Dec 26 21:51:04 opnsense ppp: [wan] Bundle: Interface ng0 created
Dec 26 21:51:04 opnsense ppp: [wan_link0] Link: OPEN event
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: Open event
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: state change Initial --> Starting
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: LayerStart
Dec 26 21:51:04 opnsense ppp: [wan_link0] PPPoE: Connecting to ''
Dec 26 21:51:04 opnsense ppp: PPPoE: rec'd ACNAME "ASR-POP101"
Dec 26 21:51:04 opnsense ppp: [wan_link0] PPPoE: connection successful
Dec 26 21:51:04 opnsense ppp: [wan_link0] Link: UP event
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: Up event
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: state change Starting --> Req-Sent
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: SendConfigReq #1
Dec 26 21:51:04 opnsense ppp: [wan_link0]   PROTOCOMP
Dec 26 21:51:04 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:04 opnsense ppp: [wan_link0]   MAGICNUM 0xb817d7e0
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: rec'd Configure Reject #1 (Req-Sent)
Dec 26 21:51:04 opnsense ppp: [wan_link0]   PROTOCOMP
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: SendConfigReq #2
Dec 26 21:51:04 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:04 opnsense ppp: [wan_link0]   MAGICNUM 0xb817d7e0
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: rec'd Configure Ack #2 (Req-Sent)
Dec 26 21:51:04 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:04 opnsense ppp: [wan_link0]   MAGICNUM 0xb817d7e0
Dec 26 21:51:04 opnsense ppp: [wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
Dec 26 21:51:06 opnsense ppp: [wan_link0] LCP: state change Ack-Rcvd --> Req-Sent
Dec 26 21:51:06 opnsense ppp: [wan_link0] LCP: SendConfigReq #3
Dec 26 21:51:06 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:06 opnsense ppp: [wan_link0]   MAGICNUM 0xb817d7e0
Dec 26 21:51:06 opnsense ppp: [wan_link0] LCP: rec'd Configure Ack #3 (Req-Sent)
Dec 26 21:51:06 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:06 opnsense ppp: [wan_link0]   MAGICNUM 0xb817d7e0
Dec 26 21:51:06 opnsense ppp: [wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
Dec 26 21:51:07 opnsense ppp: [wan_link0] LCP: rec'd Configure Request #2 (Ack-Rcvd)
Dec 26 21:51:07 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:07 opnsense ppp: [wan_link0]   AUTHPROTO PAP
Dec 26 21:51:07 opnsense ppp: [wan_link0]   MAGICNUM 0x6e4b2689
Dec 26 21:51:07 opnsense ppp: [wan_link0] LCP: SendConfigAck #2
Dec 26 21:51:07 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:07 opnsense ppp: [wan_link0]   AUTHPROTO PAP
Dec 26 21:51:07 opnsense ppp: [wan_link0]   MAGICNUM 0x6e4b2689
Dec 26 21:51:07 opnsense ppp: [wan_link0] LCP: state change Ack-Rcvd --> Opened
Dec 26 21:51:07 opnsense ppp: [wan_link0] LCP: auth: peer wants PAP, I want nothing
Dec 26 21:51:07 opnsense ppp: [wan_link0] PAP: using authname "usernamexyz"
Dec 26 21:51:07 opnsense ppp: [wan_link0] PAP: sending REQUEST #1 len: 23
Dec 26 21:51:07 opnsense ppp: [wan_link0] LCP: LayerUp
Dec 26 21:51:09 opnsense ppp: [wan_link0] PAP: using authname "usernamexyz"
Dec 26 21:51:09 opnsense ppp: [wan_link0] PAP: sending REQUEST #2 len: 23
Dec 26 21:51:09 opnsense ppp: [wan_link0] LCP: rec'd Configure Request #2 (Opened)
Dec 26 21:51:09 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:09 opnsense ppp: [wan_link0]   AUTHPROTO PAP
Dec 26 21:51:09 opnsense ppp: [wan_link0]   MAGICNUM 0x64b0f4f3
Dec 26 21:51:09 opnsense ppp: [wan_link0] LCP: LayerDown
Dec 26 21:51:09 opnsense ppp: [wan_link0] LCP: SendConfigReq #4
Dec 26 21:51:09 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:09 opnsense ppp: [wan_link0]   MAGICNUM 0xb817d7e0
Dec 26 21:51:09 opnsense ppp: [wan_link0] LCP: SendConfigAck #2
Dec 26 21:51:09 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:09 opnsense ppp: [wan_link0]   AUTHPROTO PAP
Dec 26 21:51:09 opnsense ppp: [wan_link0]   MAGICNUM 0x64b0f4f3
Dec 26 21:51:09 opnsense ppp: [wan_link0] LCP: state change Opened --> Ack-Sent
Dec 26 21:51:09 opnsense ppp: [wan_link0] LCP: rec'd Configure Ack #4 (Ack-Sent)
Dec 26 21:51:09 opnsense ppp: [wan_link0]   MRU 1492
Dec 26 21:51:09 opnsense ppp: [wan_link0]   MAGICNUM 0xb817d7e0
Dec 26 21:51:09 opnsense ppp: [wan_link0] LCP: state change Ack-Sent --> Opened
Dec 26 21:51:09 opnsense ppp: [wan_link0] LCP: auth: peer wants PAP, I want nothing
Dec 26 21:51:09 opnsense ppp: [wan_link0] PAP: using authname "usernamexyz"
Dec 26 21:51:09 opnsense ppp: [wan_link0] PAP: sending REQUEST #1 len: 23
Dec 26 21:51:09 opnsense ppp: [wan_link0] LCP: LayerUp
Dec 26 21:51:10 opnsense ppp: [wan_link0] rec'd proto IPCP during authenticate phase
Dec 26 21:51:10 opnsense ppp: [wan_link0] PAP: rec'd ACK #1 len: 40
Dec 26 21:51:10 opnsense ppp: [wan_link0]   MESG: Welcome to wilhelm.tel BRAS-Service
Dec 26 21:51:10 opnsense ppp: [wan_link0] LCP: authorization successful
Dec 26 21:51:10 opnsense ppp: [wan_link0] Link: Matched action 'bundle "wan" ""'
Dec 26 21:51:10 opnsense ppp: [wan_link0] Link: Join bundle "wan"
Dec 26 21:51:10 opnsense ppp: [wan] Bundle: Status update: up 1 link, total bandwidth 64000 bps
Dec 26 21:51:10 opnsense ppp: [wan] IPCP: Open event
Dec 26 21:51:10 opnsense ppp: [wan] IPCP: state change Initial --> Starting
Dec 26 21:51:10 opnsense ppp: [wan] IPCP: LayerStart
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: Open event
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: state change Initial --> Starting
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: LayerStart
Dec 26 21:51:10 opnsense ppp: [wan] IPCP: Up event
Dec 26 21:51:10 opnsense ppp: [wan] IPCP: state change Starting --> Req-Sent
Dec 26 21:51:10 opnsense ppp: [wan] IPCP: SendConfigReq #1
Dec 26 21:51:10 opnsense ppp: [wan]   IPADDR 0.0.0.0
Dec 26 21:51:10 opnsense ppp: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Dec 26 21:51:10 opnsense ppp: [wan]   PRIDNS 0.0.0.0
Dec 26 21:51:10 opnsense ppp: [wan]   SECDNS 0.0.0.0
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: Up event
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: state change Starting --> Req-Sent
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: SendConfigReq #1
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: rec'd Configure Request #1 (Req-Sent)
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: SendConfigAck #1
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: state change Req-Sent --> Ack-Sent
Dec 26 21:51:10 opnsense ppp: [wan] IPCP: rec'd Configure Reject #1 (Req-Sent)
Dec 26 21:51:10 opnsense ppp: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Dec 26 21:51:10 opnsense ppp: [wan] IPCP: SendConfigReq #2
Dec 26 21:51:10 opnsense ppp: [wan]   IPADDR 0.0.0.0
Dec 26 21:51:10 opnsense ppp: [wan]   PRIDNS 0.0.0.0
Dec 26 21:51:10 opnsense ppp: [wan]   SECDNS 0.0.0.0
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: rec'd Configure Ack #1 (Ack-Sent)
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: state change Ack-Sent --> Opened
Dec 26 21:51:10 opnsense ppp: [wan] IPV6CP: LayerUp
Dec 26 21:51:10 opnsense ppp: [wan]   0201:2eff:fe6e:ff08 -> aa9d:21ff:fea5:7b00
Dec 26 21:51:11 opnsense ppp: [wan] IFACE: Up event
Dec 26 21:51:11 opnsense ppp: [wan] IFACE: Rename interface ng0 to pppoe0
Dec 26 21:51:11 opnsense ppp: [wan] IPCP: rec'd Configure Nak #2 (Req-Sent)
Dec 26 21:51:11 opnsense ppp: [wan]   IPADDR 46.59.144.248
Dec 26 21:51:11 opnsense ppp: [wan]     46.59.144.248 is OK
Dec 26 21:51:11 opnsense ppp: [wan]   PRIDNS 213.209.104.220
Dec 26 21:51:11 opnsense ppp: [wan]   SECDNS 213.209.104.250
Dec 26 21:51:11 opnsense ppp: [wan] IPCP: SendConfigReq #3
Dec 26 21:51:11 opnsense ppp: [wan]   IPADDR 46.59.144.248
Dec 26 21:51:11 opnsense ppp: [wan]   PRIDNS 213.209.104.220
Dec 26 21:51:11 opnsense ppp: [wan]   SECDNS 213.209.104.250
Dec 26 21:51:12 opnsense ppp: [wan] IPCP: rec'd Configure Ack #3 (Req-Sent)
Dec 26 21:51:12 opnsense ppp: [wan]   IPADDR 46.59.144.248
Dec 26 21:51:12 opnsense ppp: [wan]   PRIDNS 213.209.104.220
Dec 26 21:51:12 opnsense ppp: [wan]   SECDNS 213.209.104.250
Dec 26 21:51:12 opnsense ppp: [wan] IPCP: state change Req-Sent --> Ack-Rcvd
Dec 26 21:51:12 opnsense ppp: [wan] IPCP: rec'd Configure Request #2 (Ack-Rcvd)
Dec 26 21:51:12 opnsense ppp: [wan]   IPADDR 84.46.104.216
Dec 26 21:51:12 opnsense ppp: [wan]     84.46.104.216 is OK
Dec 26 21:51:12 opnsense ppp: [wan] IPCP: SendConfigAck #2
Dec 26 21:51:12 opnsense ppp: [wan]   IPADDR 84.46.104.216
Dec 26 21:51:12 opnsense ppp: [wan] IPCP: state change Ack-Rcvd --> Opened
Dec 26 21:51:12 opnsense ppp: [wan] IPCP: LayerUp
Dec 26 21:51:12 opnsense ppp: [wan]   46.59.144.248 -> 84.46.104.216


Any ideas? My provider supplies this document for the PPPoE configuration (german):
http://www.willytel.de/fileadmin/redaktion/Unternehmen/Informationen_zur_Nutzung_eines_kundeneigenen_Endger%C3%A4tes_Stand_Juli_2016.pdf

I need "Einstellungen Internet-Zugang (Ethernet/PPPoE)" but it just says DHCPv6 prefix delegation and for ipv4 DS-Lite (which is wrong in my case - i get a public ipv4 address).
#41
16.7 Legacy Series / Re: HW acceleration settings are not applied to all nics
December 11, 2016, 09:39:13 PM
Thank you. I will try the beta as soon as its available.

I am missing the VLAN_HWTAGGING option on re0. So it seems to be enabled on re1 and disabled on re0, isnt it?
#42
16.7 Legacy Series / Re: HW acceleration settings are not applied to all nics
December 09, 2016, 04:44:20 PM
The screenshot and the ifconfig output were created after a restart without any further changes to the settings.
#43
16.7 Legacy Series / HW acceleration settings are not applied to all nics
December 09, 2016, 01:19:30 PM
Hello,

i am pretty new to opnsense and i am using the zotac C323 with 16.7.10 as firewall.

Since we have wan/lan disconnects (ports are going wild - more in another thread) i tried to disable all hw acceleration features for the network cards and found that not all options are applied to all network cards. Maybe the features are only disabled if the feature (vlan) is used on that card but thats just guessing.  re0 is lan and re1 is wan (without vlans). Wan is just a static ip configuration:


ifconfig
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=82088<VLAN_MTU,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
   ether 00:01:2e:6e:19:72
   inet6 fe80::201:2eff:fe6e:1972%re0 prefixlen 64 scopeid 0x1
   inet 192.168.41.1 netmask 0xffffff00 broadcast 192.168.41.255
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect (1000baseT <full-duplex>)
   status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=82098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
   ether 00:01:2e:6e:19:73
   inet xx.xx.xx.x6 netmask 0xffffffc0 broadcast xx.xx.xx.xx
   inet6 fe80::201:2eff:fe6e:1973%re1 prefixlen 64 scopeid 0x2
   inet xx.xx.xx.x7 netmask 0xffffffff broadcast xx.xx.xx.xx
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect (1000baseT <full-duplex>)
   status: active
pflog0: flags=100<PROMISC> metric 0 mtu 33160
pfsync0: flags=0<> metric 0 mtu 1500
   syncpeer: 0.0.0.0 maxupd: 128 defer: off
enc0: flags=0<> metric 0 mtu 1536
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
   options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
   inet 127.0.0.1 netmask 0xff000000
   inet6 ::1 prefixlen 128
   inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0_vlan101: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   ether 00:01:2e:6e:19:72
   inet6 fe80::201:2eff:fe6e:1972%re0_vlan101 prefixlen 64 scopeid 0x7
   inet 192.168.141.1 netmask 0xffffff00 broadcast 192.168.141.255
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect (1000baseT <full-duplex>)
   status: active
   vlan: 101 parent interface: re0
Pages 1 2 3