Topics

Hi,

I am running v24.1.7.

Recently, I was playing around with Wireguard, and somehow, my Wireguard (Group) group no longer appears in the Firewall rules.
I tried rebooting, and also restarting Wireguard (un-check Enable, then re-check Enable) too. Neither helped.
I did create a Wireguard instance and also my Peer in the Wireguard configuration beforehand.

Any advice or things to try?

Hi,

I am having trouble with trying to block traffic IN to LAN to a specific public IP (e.g., Blocked_Internet_IP).
The firewall Log Files (Live View) is not showing any traffic when I send the traffic from a LAN host to this blocked IP on port 80, using "telnet Blocked_Internet_IP 80".

Strangely enough, the Firewall Log Files does show this connection OUT to WAN, to this Blocked_Internet_IP on port 80.
Furthermore, if I run a pcap capture (Interfaces -> Diagnostics) on the LAN interface, I can clearly see the traffic being received - which I assume must mean this is an IN traffic to the LAN interface.

I could create Block rules on the Firewall using WAN Interface OUT, but I understand this is not encouraged, therefore I would like to get to the bottom of this.

Thanks in advance for any tips.