Hello,
after frustrating weeks on trying to make Opnsense run again after upgrading to latest version, here my last try to get it resolved, otherwise I need to switch to alternative solutions... hope you can help and I try to better describe now. Opnsense has really great functionality but must be stable...
It was running fine for last year and problems startet out of sudden over last month with upgrades...
I'm getting IPv4 & IPv6 from ISP without issue, no error and all running fine. After sometimes 6/12/24h out of sudden below error appear in log, and 15-30min later, Opnsense has not more LAN - reload services via shell does not help but only restart helps!
Configuration:
- Opnsense 27.7.7 (fresh install meanwhile + load minimum config - but also did not help)
- ISP - Deutsche Glasfaser (WAN DHCPv6, Prefix delegation size 56) all other default
- LAN (Track Interface WAN + manuell RA: Managed )
- no Vlans
DHCPv6 seems to work fine for ISP, and trying to use e.g. SLAAC was not successful.
LAN
192.168.0.1/24 - 2a00:6020:4347:xx01:2xx:2exx:fe96:7406/64
WAN
100.118.xx.250/16 - 2a00:6020:1000:xx::47x9/128
General Log:
2024-11-03T09:02:38 Error opnsense /usr/local/etc/rc.newwanipv6: The command '/usr/sbin/daemon -f -p '/var/run/dhcpleases6.pid' '/usr/local/opnsense/scripts/dhcp/prefixes.sh'' returned exit code '3', the output was 'daemon: process already running, pid: 63828'
2024-11-03T08:50:54 Warning radvd exiting, 1 sigterm(s) received
2024-11-03T08:50:54 Error opnsense /usr/local/etc/rc.newwanipv6: The command '/bin/kill -'TERM' '59777''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 59777: No such process'
2024-11-03T08:50:50 Warning radvd exiting, 1 sigterm(s) received
2024-11-03T08:50:50 Warning opnsense /usr/local/etc/rc.linkup: dhcpd_radvd_configure(manual) found no suitable IPv6 address on lan(re0)
2024-11-03T08:50:49 Warning opnsense /usr/local/etc/rc.linkup: dhcpd_dhcp6_configure() found no suitable IPv6 address on lan(re0)
After few minutes, the LAN hangs (but no further log) - only restart from shell can recover...
after frustrating weeks on trying to make Opnsense run again after upgrading to latest version, here my last try to get it resolved, otherwise I need to switch to alternative solutions... hope you can help and I try to better describe now. Opnsense has really great functionality but must be stable...
It was running fine for last year and problems startet out of sudden over last month with upgrades...
I'm getting IPv4 & IPv6 from ISP without issue, no error and all running fine. After sometimes 6/12/24h out of sudden below error appear in log, and 15-30min later, Opnsense has not more LAN - reload services via shell does not help but only restart helps!
Configuration:
- Opnsense 27.7.7 (fresh install meanwhile + load minimum config - but also did not help)
- ISP - Deutsche Glasfaser (WAN DHCPv6, Prefix delegation size 56) all other default
- LAN (Track Interface WAN + manuell RA: Managed )
- no Vlans
DHCPv6 seems to work fine for ISP, and trying to use e.g. SLAAC was not successful.
LAN
192.168.0.1/24 - 2a00:6020:4347:xx01:2xx:2exx:fe96:7406/64
WAN
100.118.xx.250/16 - 2a00:6020:1000:xx::47x9/128
General Log:
2024-11-03T09:02:38 Error opnsense /usr/local/etc/rc.newwanipv6: The command '/usr/sbin/daemon -f -p '/var/run/dhcpleases6.pid' '/usr/local/opnsense/scripts/dhcp/prefixes.sh'' returned exit code '3', the output was 'daemon: process already running, pid: 63828'
2024-11-03T08:50:54 Warning radvd exiting, 1 sigterm(s) received
2024-11-03T08:50:54 Error opnsense /usr/local/etc/rc.newwanipv6: The command '/bin/kill -'TERM' '59777''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 59777: No such process'
2024-11-03T08:50:50 Warning radvd exiting, 1 sigterm(s) received
2024-11-03T08:50:50 Warning opnsense /usr/local/etc/rc.linkup: dhcpd_radvd_configure(manual) found no suitable IPv6 address on lan(re0)
2024-11-03T08:50:49 Warning opnsense /usr/local/etc/rc.linkup: dhcpd_dhcp6_configure() found no suitable IPv6 address on lan(re0)
After few minutes, the LAN hangs (but no further log) - only restart from shell can recover...
"