Messages

1

Virtual private networks / Re: WireGuard VPN - Connecting to IPs on LAN not working with the exception of GW

« on: June 14, 2022, 01:43:43 pm »

Thanks for the help everyone. This worked:

That’s what I mean. You’ve given your phone an IP in your LAN subnet. It should instead be something like 10.1.1.2/32.

And the tunnel address in the OPNsense local config should be 10.1.1.1/24

I can reach every device on the subnet 10.80.55.0/24 now.

2

Virtual private networks / Re: WireGuard VPN - Connecting to IPs on LAN not working with the exception of GW

« on: June 13, 2022, 05:05:12 pm »

Hey Greelan,
Maybe I did not a good job at explaining this part.
I had used the VPN Subnet 10.1.1.0 (what I think you mean by WG Subnet).
Here another Screenshots of what I did that may clarify this part.
Thanks.

3

Virtual private networks / [SOLVED] WireGuard VPN - Connecting to IPs on LAN not working - exception GW

« on: June 13, 2022, 07:58:52 am »

Hello everyone,

I could not find any other topic that covered my problem so I created this topic.
The guide I followed to set this up is this one:
https://homenetworkguy.com/how-to/configure-wireguard-opnsense/
I attached a png of my basic setup to this post (hope this works since I cannot see it on preview).

What works:
VPN connects and I can access the Internet and the opnsense Web-GUI while connected to the VPN.

What does not work:
Can neither ping nor access any other resource on the LAN 10.80.55.0/24

I am suspecting some firewall issue or routing to be the problem. I am however at a loss to where to add what or how to troubleshoot this issue.

What can I do? If more information is needed I am happy to provide.