OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: nle on August 01, 2018, 03:11:06 pm

Title: [Solved] No longer getting WAN ip after upgrade to 18.7?
Post by: nle on August 01, 2018, 03:11:06 pm

Hi, I recently took the jump to 18.7, but after upgrade I do not get an external ip on my WAN interface.

My network setup is: cable modem --> Opnsense --> switch --> users.

It can see the ISP dhcp server fine, but it's not getting an ip.

Any input on this?

EDIT:
I briefly got ipv6 connection

And I have this in my logfile:

Code: [Select]

opnsense: /interfaces.php: The command '/sbin/dhclient -c '/var/etc/dhclient_wan.conf' -p '/var/run/dhclient.bce0.pid' 'bce0'' returned exit code '15', the output was 'dhclient: PREINIT dhclient: Starting delete_old_states() dhclient: Comparing IPs: Old: 84.209.XXX.XXX New: dhclient: Removing states from old IP '84.209.XXX.XXX' (new IP '') 0 states cleared killed 0 src nodes from 1 sources and 0 destinations DHCPREQUEST on bce0 to 255.255.255.255 port 67 DHCPREQUEST on bce0 to 255.255.255.255 port 67 DHCPREQUEST on bce0 to 255.255.255.255 port 67 DHCPDISCOVER on bce0 to 255.255.255.255 port 67 interval 2 DHCPDISCOVER on bce0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on bce0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on bce0 to 255.255.255.255 port 67 interval 14'
Also I have a lot of rules going through my FW log with the source IP as my previous public IP. Even though my WAN shows an ip 0.0.0.0.

Any help i much appreciated (sorry I'm pretty new to this).

Title: Re: [18.7] No longer getting WAN ip after upgrade?
Post by: mimugmail on August 01, 2018, 03:41:37 pm

Did you also restart cable modem?

Title: Re: [18.7] No longer getting WAN ip after upgrade?
Post by: nle on August 01, 2018, 03:50:55 pm

Thank you! That did the trick. I was looking all over for other solutions.
I did not think of that. In prior updates, it has been no issues.