OPNsense Forum

Archive => 16.1 Legacy Series => Topic started by: mdgroof on March 30, 2016, 10:18:35 am

Title: Traffic shaping / limitting over two PPPoE connections
Post by: mdgroof on March 30, 2016, 10:18:35 am

Let me explain my situation:

We are testing OPNSense for use as central firewall in an IPVPN. OPNSense is running onn Xen. Our OPNSense VPS uses two PPPoE connections to the core network. 1st PPPoE connection connects the firewall with the internet (public IP adres) and the second PPPoE connection connects the firewall with the internal network (172.31.255.x) clients also connect over a PPPoE connection to the firewall and receive a pre-configured IP address in the same private subnet (172.31.255.x).

It's important that we can limit bandwidth per ip/subnet. I've followed the configuration directions from this link:
https://docs.opnsense.org/manual/how-tos/shaper.html
It seems to be a straight forward configuration but is not working. Is there something I'm missing here? Are the two PPPoE connections causing problems?

Title: Re: Traffic shaping / limitting over two PPPoE connections
Post by: Julien on June 30, 2016, 11:17:23 pm

i woud like to know this too.
willing to go live with two WAN and QOS for IP Phones.
i just followed the rules and does works fine.
what is not working for you ?