OPNsense Forum

Archive => 15.7 Legacy Series => Topic started by: RickNY on August 24, 2015, 01:20:06 pm

Title: 15.7 Install on Netgate RCC-VE 2440
Post by: RickNY on August 24, 2015, 01:20:06 pm

Hi.. I tried to install fresh with 15.7 using the OPNsense-15.7_OpenSSL-serial-amd64.img installer to a Netgate RCC-VE 2440 using the instructions provided for 15.1 on Netgate's site here: http://www.netgate.com/docs/rcc-ve-2440/opnsense.html

I was able to get the console working through the install, as well as booting into single user mode after the install was completed to make the necessary changes.  However, upon the final reboot, the console reported something about default loader.conf and then dies.. Also can't access the webconfigurator and all input/output from the console ceases.

Also -- I seem to have an issue with the terminal emulation used in the Opnsense screens as opposed to pfSense in regards to the fact that I see each character in the Opnsense console followed by a LF.. Any ideas how to fix that? Doesn't happen with the same terminal settings in pfSense - I'm assuming its a problem with the serial settings?

Thanks,
Rick