My configuration is as follows:
igb0 is WAN
igb1 is LAN (192.168.1.0/24)
igb2 is OPT1 (192.168.0.0/30)
I have added rules to OPT1's firewall to let traffic through. I don't think I need to add anything to LAN's rules?
But I can't ping 192.168.0.2 from the LAN or the router. I can ping 192.168.0.1.
When I take a look at the routes, it knows that 192.168.0.0/30 should go on Link#3, but 192.168.0.2 goes out the WAN gateway.
Why is that? How does it make any sense if 192.168.0.0/30 is on Link#3? Why would it send 192.168.0.2 out WAN?
สมัครufabet (http://www.ufa365.com/%E0%B8%AA%E0%B8%A1%E0%B8%B1%E0%B8%84%E0%B8%A3ufabet/)
Any help would be greatlt appreciated.
ufabet (http://www.ufa365.com/%E0%B8%AA%E0%B8%A1%E0%B8%B1%E0%B8%84%E0%B8%A3ufabet/)
Thanks a lot.
(https://forum.opnsense.org/index.php?action=dlattach;topic=7357.0;attach=3324;image)
(https://forum.opnsense.org/index.php?action=dlattach;topic=7357.0;attach=3326;image)
Were you ever able to track down your problem? I think I'm having a similar problem with a VLAN interface. Everything looks like it's configured properly but the traffic just doesn't seem to flow across the interface.