OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: thiertmd365 on February 28, 2018, 05:43:35 pm

Title: Issue with the router defaulting to the wrong route for OPT1
Post by: thiertmd365 on February 28, 2018, 05:43:35 pm
My configuration is as follows:

igb0 is WAN
igb1 is LAN (192.168.1.0/24)
igb2 is OPT1 (192.168.0.0/30)

I have added rules to OPT1's firewall to let traffic through. I don't think I need to add anything to LAN's rules?

But I can't ping 192.168.0.2 from the LAN or the router. I can ping 192.168.0.1.

When I take a look at the routes, it knows that 192.168.0.0/30 should go on Link#3, but 192.168.0.2 goes out the WAN gateway.

Why is that? How does it make any sense if 192.168.0.0/30 is on Link#3? Why would it send 192.168.0.2 out WAN?
สมัครufabet (http://www.ufa365.com/สมัครufabet/)
Any help would be greatlt appreciated.
ufabet (http://www.ufa365.com/สมัครufabet/)
Thanks a lot.

(https://forum.opnsense.org/index.php?action=dlattach;topic=7357.0;attach=3324;image)

(https://forum.opnsense.org/index.php?action=dlattach;topic=7357.0;attach=3326;image)

Title: Re: Issue with the router defaulting to the wrong route for OPT1
Post by: RNHurt on July 05, 2018, 11:03:54 am
Were you ever able to track down your problem?  I think I'm having a similar problem with a VLAN interface.  Everything looks like it's configured properly but the traffic just doesn't seem to flow across the interface.