Hello !
I received my brand new APU3 [1] a few days ago
I tried to install opnsense on a brand new sd card.
* I downloaded [2]
* uncompressed
* dd if=[2] of=/dev/rdisk2 bs=1m # on my mabookpro
* Put the sd card in the APU
* booted
* configured using the wizard
* reboot
** Kaboom: the /\| wheel is spinning very slowly and ends with a message 'Failed to load kernel' ( some characters doubled, other separated by a blank space...)
I managed to use the "installer" version ( burn a usb flashdrive and installed on the sd card ) : This works OK
Any idea why the gear dos not reboot ?
Thanks in advance
Etienne
[1] https://www.pcengines.ch/apu3b4.htm
[2] OPNsense-17.1.4-OpenSSL-nano-amd64.img.bz2
Followup
I tried with another SD card ... and it works
SD card failing on reboot: http://www.pcengines.ch/sd4b.htm
https://github.com/opnsense/core/issues/1195
Working sd CARD:
16 GB "medion" card..
4GB pcengines
Disk Size: 4.0 GB (3980394496 Bytes) (exactly 7774208 512-Byte-Units)
Device Block Size: 512 Bytes
16GB medion
Disk Size: 15.9 GB (15926820864 Bytes) (exactly 31107072 512-Byte-Units)
Device Block Size: 512 Bytes
And bell ringing ?
In the meantime I used the installer on a memstick to install on the 4GB sdcard ... no issue
Is there any other configuration to implement in addition to mounting /tmp and /var... on a memory disk ?