Print Page - upgrade from OPNsense 16.7.14_2-amd64 to 17.1 on root console option 12 hangs

Title: upgrade from OPNsense 16.7.14_2-amd64 to 17.1 on root console option 12 hangs
Post by: plumpychunq on February 14, 2017, 08:57:44 PM

Hello,
OPNsense 16.7.14_2-amd64 is running fine on my Protectli FW108120 Micro Firewall Appliance.
When I try and upgrade to 17.1 via console option 12 it hangs right after dimensions, stride, masks...
This also happens if I try to install fresh from USB image.
See attached screen shot.
Any help would be greatly appreciated!!! ;) :D ;D
Thanks
--PlumpyChunq

Title: Re: upgrade from OPNsense 16.7.14_2-amd64 to 17.1 on root console option 12 hangs
Post by: bartjsmit on February 15, 2017, 08:44:35 AM

Have a look at the virtual terminal driver setting, as listed under Franco's notes on 17.1 https://forum.opnsense.org/index.php?topic=4416.msg16680

Bart...

Title: Re: upgrade from OPNsense 16.7.14_2-amd64 to 17.1 on root console option 12 hangs
Post by: plumpychunq on February 15, 2017, 11:52:49 PM

:)
Thanks for such a quick response. You were right.
Here is what fixed it:

https://forum.opnsense.org/index.php?topic=4319.msg16104#msg16104

1. Escape to loader prompt (3)
2. Type: set kern.vty="vt"
3. Type: boot

And then edit /boot/loader.conf to "set kern.vty="vt""

Thanks to Franco and Stormy as well!!!

Title: Re: upgrade from OPNsense 16.7.14_2-amd64 to 17.1 on root console option 12 hangs
Post by: franco on February 16, 2017, 07:22:50 AM

Although that is good news, /boot/loader.conf modifications are not permanent. Please select the VT driver under System: Settings: Administration to make it permanent.

Cheers,
Franco

Title: Re: upgrade from OPNsense 16.7.14_2-amd64 to 17.1 on root console option 12 hangs
Post by: plumpychunq on February 16, 2017, 03:09:24 PM

OK.
Thanks again!

OPNsense Forum

English Forums => General Discussion => Topic started by: plumpychunq on February 14, 2017, 08:57:44 PM