Text only | Text with Images

OPNsense Forum

Archive => 16.1 Legacy Series => Topic started by: nemodex on May 31, 2016, 11:41:30 AM

Title: Setup access point
Post by: nemodex on May 31, 2016, 11:41:30 AM
Hi to everybody
I change my small pcengines from pfsense to opnsense..
But i can't set up wifi card and set up access point.

I don't find the field where to put ssd name.




This is my screenshot


What can I do ??

Thanks

Andrea


Title: Re: Setup access point
Post by: phoenix on May 31, 2016, 11:46:51 AM
Have you assigned an interface for the wlan? You do that on the Interfaces/Assignments page.
Title: Re: Setup access point
Post by: fabian on May 31, 2016, 12:39:06 PM
Have you created a wireless clone?
Title: Re: Setup access point
Post by: nemodex on May 31, 2016, 01:22:46 PM
Quote from: fabian on May 31, 2016, 12:39:06 PM
Have you created a wireless clone?
No because don't find some guide to configure Wi-Fi.

Title: Re: Setup access point
Post by: fabian on May 31, 2016, 09:04:09 PM
The wireless settings are only visible on wireless clone interfaces. Do not assign your wireless interface directly. Instead create a wireless clone interface and assign this interface. The wireless settings will be visible.
Title: Re: Setup access point
Post by: nemodex on June 01, 2016, 09:25:33 AM
How can i clone wireless card?
Title: Re: Setup access point
Post by: fabian on June 01, 2016, 10:27:04 AM
Interfaces -> Wireless
Text only | Text with Images