Print Page - upgraded from 19.1.10 to 19.7r1, NetFlow data is not working

Title: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: opnfwb on July 11, 2019, 02:34:52 PM

Upgraded from 19.1.10 to 19.7r1. NetFlow data is no longer working. I have tried resetting NetFlow and also repairing it.

The interface totals graph continues to work and I can see activity. However the lower graph for port usage and sources is blank and does not populate connection information.

Screenshot is attached to show the issue.

Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: nivek1612 on July 11, 2019, 06:18:02 PM

Seeing the same here. Can see activity but no data

No amount of resets or repair seems to work

Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: tillsense on July 11, 2019, 08:00:08 PM

Hi all,

can I also confirm here.

cheers
till

Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: franco on July 11, 2019, 08:18:46 PM

Hi guys,

I'm seeing this too after reset. Closer look will follow.

Thanks so far,
Franco

Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: AdSchellevis on July 12, 2019, 08:45:30 AM

Ok, eventually I could reproduce it, https://github.com/opnsense/core/commit/24dc2a82b5c82651c5c5925669c35ef4e5ceadf4 (https://github.com/opnsense/core/commit/24dc2a82b5c82651c5c5925669c35ef4e5ceadf4) should fix the issue.

To test, run:

Code Select


opnsense-patch 24dc2a82b

and reset netflow data again.

Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: nivek1612 on July 12, 2019, 09:49:55 AM

Thanks that seems to fix it

OPNsense Forum

Archive => 19.7 Legacy Series => Topic started by: opnfwb on July 11, 2019, 02:34:52 PM