OPNsense Forum

Archive => 19.7 Legacy Series => Topic started by: opnfwb on July 11, 2019, 02:34:52 pm

Title: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: opnfwb on July 11, 2019, 02:34:52 pm
Upgraded from 19.1.10 to 19.7r1. NetFlow data is no longer working. I have tried resetting NetFlow and also repairing it.

The interface totals graph continues to work and I can see activity. However the lower graph for port usage and sources is blank and does not populate connection information.

Screenshot is attached to show the issue.
Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: nivek1612 on July 11, 2019, 06:18:02 pm
Seeing the same here. Can see activity but no data

No amount of resets or repair seems to work
Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: tillsense on July 11, 2019, 08:00:08 pm
Hi all,

can I also confirm here.

cheers
till
Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: franco on July 11, 2019, 08:18:46 pm
Hi guys,

I'm seeing this too after reset. Closer look will follow.


Thanks so far,
Franco
Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: AdSchellevis on July 12, 2019, 08:45:30 am
Ok, eventually I could reproduce it, https://github.com/opnsense/core/commit/24dc2a82b5c82651c5c5925669c35ef4e5ceadf4 (https://github.com/opnsense/core/commit/24dc2a82b5c82651c5c5925669c35ef4e5ceadf4) should fix the issue.

To test, run:

Code: [Select]
opnsense-patch 24dc2a82b

and reset netflow data again.
Title: Re: upgraded from 19.1.10 to 19.7r1, NetFlow data is not working
Post by: nivek1612 on July 12, 2019, 09:49:55 am
Thanks that seems to fix it