Text only | Text with Images

OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: orangetek on June 19, 2019, 09:22:16 AM

Title: We need to be able to increase Dummynet Queue size Slots above 100
Post by: orangetek on June 19, 2019, 09:22:16 AM
We have a 600mbits/sec fiber connection with over 800 customers connected to the LAN side. 100 slots is far too small to take advantage of the bandwidth. I dont care if latency increases a bit. I tried increasing it in sysctl and it does change but the gui seems to be hard coded to 100. Anyone have any suggestions?

Thanks.
Title: Re: We need to be able to increase Dummynet Queue size Slots above 100
Post by: mimugmail on June 19, 2019, 02:50:04 PM
Isnt there a setting in FQ Codel scheduled when hitting Advanced?
Title: Re: We need to be able to increase Dummynet Queue size Slots above 100
Post by: orangetek on June 19, 2019, 11:35:25 PM
Im using weighted fair queue. Its the 'queue' setting in the shaper. Sysctl -a Net.inet.ip.dummynet.pipe_slot_limit shows 1000 but changing the queue size in the shaper gui allows only 2-100
Title: Re: We need to be able to increase Dummynet Queue size Slots above 100
Post by: mimugmail on June 20, 2019, 11:50:54 AM
Can you open a Feature request via GitHub? Btw. with this size QFQ outperforms W2FQ
Title: Re: We need to be able to increase Dummynet Queue size Slots above 100
Post by: orangetek on June 20, 2019, 01:42:37 PM
Last time i tried QFQ, it kept randomly freezing, stopping all traffic on the network
Text only | Text with Images