OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: orangetek on June 19, 2019, 09:22:16 am

Title: We need to be able to increase Dummynet Queue size Slots above 100
Post by: orangetek on June 19, 2019, 09:22:16 am

We have a 600mbits/sec fiber connection with over 800 customers connected to the LAN side. 100 slots is far too small to take advantage of the bandwidth. I dont care if latency increases a bit. I tried increasing it in sysctl and it does change but the gui seems to be hard coded to 100. Anyone have any suggestions?

Thanks.

Title: Re: We need to be able to increase Dummynet Queue size Slots above 100
Post by: mimugmail on June 19, 2019, 02:50:04 pm

Isnt there a setting in FQ Codel scheduled when hitting Advanced?

Title: Re: We need to be able to increase Dummynet Queue size Slots above 100
Post by: orangetek on June 19, 2019, 11:35:25 pm

Im using weighted fair queue. Its the 'queue' setting in the shaper. Sysctl -a Net.inet.ip.dummynet.pipe_slot_limit shows 1000 but changing the queue size in the shaper gui allows only 2-100

Title: Re: We need to be able to increase Dummynet Queue size Slots above 100
Post by: mimugmail on June 20, 2019, 11:50:54 am

Can you open a Feature request via GitHub? Btw. with this size QFQ outperforms W2FQ

Title: Re: We need to be able to increase Dummynet Queue size Slots above 100
Post by: orangetek on June 20, 2019, 01:42:37 pm

Last time i tried QFQ, it kept randomly freezing, stopping all traffic on the network