Print Page - [SOLVED] Interface IP configuration

Title: [SOLVED] Interface IP configuration
Post by: albercuba on January 16, 2019, 11:39:47 AM

Hi everyone.

When I configure an interface as static and I go to assign the IP address, in the mask do I have to set the mask bits for the whole network or only for that interface?

Example:

Let's say my network is 10.0.1.0 with netmask 255.255.248.0

When I assign the IP 10.0.1.10 to one of my firewall interfaces, in the mask bit do I set 32 or 21?

Title: Re: Interface IP configuration
Post by: bartjsmit on January 16, 2019, 12:48:48 PM

Title: Re: Interface IP configuration
Post by: albercuba on January 16, 2019, 01:10:53 PM

Thanks

OPNsense Forum

English Forums => General Discussion => Topic started by: albercuba on January 16, 2019, 11:39:47 AM